Considering strong disturbance environment in the field area, redundant design in bus cable, CAN controller and driver is involved to assure the reliability of data transmission.
考虑到现场的环境干扰较强，对总线电缆及CAN控制器、驱动器采用了冗余设计，保证数据传输的可靠性。
And it has introduced such several kinds of typical modules as data acquisition, Controller, Frequency spectrum analysis and remote data transmission, etc.
并在此基础上，详细介绍了数据链接、控制器、频谱分析、远程数据传输等几种典型模块。
The Onboard Controller accomplishes data collecting, data memorizing, display and transmission.
车载控制器完成信息的采集、存储、显示、传输；
The servo system of azimuth controller is a combine system of mechanics and electrics, the transmission mechanism drives the executive element by control signal to carry out the demanded motion.
方位控制器伺服系统是一种机、电相结合的系统，机械传动装置根据控制信号驱动执行元件完成指令要求的运动。
Using interface graphic scheme, this paper presents the parameter optimization method for DC transmission PID controller based on expanding critical ratio method.
基于界面图形化方式，提出以扩充临界比例法为基础的直流输电系统PID控制器参数优化方法。
Exponential stability and controller design problems for networked control system (NCS) with time-varying delay and multiple-packet transmission were studied.
对时变时延多包传输网络控制系统的指数稳定性和控制器设计问题进行研究。
According to the structure character and transmission characteristic of superflexible coaxial cable, this paper presents a controller based on DSP of corrugator for superflexible coaxial cable.
根据超柔同轴电缆的结构特点和传输特性，设计并研制了生产超柔同轴电缆的基于DSP的轧纹机控制器。
The paper introduces the transmission of data based on MCS51 microcontroller series and Ethernet controller -cs8900a. Also, the software and hardware method is given to realize it.
本文介绍了基于MCS51系列单片机和CS8900 A以太网控制器的数据的网络传输，井给出了软硬件的实现方法。
The output voltage of controller exerts an influence on thermal resistor so as to change gain characteristic in regulation circuit, thus the transmission levels being stabilized.
通过导频控制器的输出电压控制热敏电阻，从而改变调节网络的增益，达到稳定传输电平的目的。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
A novel structure of controller and special transmission rule are designed for reducing the number of data packet exchanges and make the system stable.
设计了一个能使系统稳定的新型结构的控制器和一个特殊的网络传输规则。
The simulation model of the dual clutch automatic transmission is created, the dynamic characteristics of the dual clutch transmission is analyzed and a gear shifting controller is developed.
建立了双离合器自动变速器系统仿真模型，对双离合器自动变速器的动态特性进行了分析，并开发了换挡控制器。
A central controller of the WLAN generates a schedule for transmission at different power levels, and each access point varies its transmission power level based on the schedule.
所述WLAN的中央控制器生成针对在不同功率级下进行传送的调度表，并且每一个接入点基于该调度表改变其传传输功率级。
The paper interprets the necessity of intelligent control in the turret transmission system. A fuzzy controller is designed with continuous fuzzy variables and the simulation is made.
介绍了炮塔传动系统智能控制的必要性，设计了连续论域的变参数模糊控制器，并进行了仿真研究。
In this paper, we introduce a humidity controller using wireless data transmission system with multi-probe, and present the unit circuit and the program flow chart.
本文介绍了一种多探头输入利用无线数据进行传输的湿度控制仪，给出了单元电路图和程序流程图。
For monitoring the working state signal of mechanical transmission test-bed immediately, adopt the remote monitoring system which bases on embedded Ethernet controller 8000e.
为了实时监测机械传动试验台工作状态信号，采用基于嵌入式以太网控制器8000e的远程监测系统。
Say simply, video conference system including video conferencing terminals, multipoint meeting controller MCU, network management software and transmission network four parts.
简单地说，视频会议系统包括视频会议终端、多点会议控制器mcu、网络管理软件和传输网络四部分。
The simulation system can be used to analyze the dynamic characteristic of automatic transmission during gear shifting, and can be used for shift controller development.
该系统可有效地分析自动变速箱换档过程的动态特性，并用于换档控制器的开发。
This paper describes an on - line controller for the fast and flexible control of the HVDC transmission system based on fuzzy logic and ANN.
提出了一种适用于高压直流输电系统快速灵活控制的在线模糊神经直流控制器。
The controller can realize not only the collection, processing and display of the signal, but also the transmission of signals between different nodes through can bus.
该控制器不仅可实现信号的采集、处理、显示，还可通过CAN总线实现不同节点间信号的传输。
The use of a continuously variable transmission(CVT) with an integrated engine controller allows great freedom of choice of the engine operating point to deliver the power demanded by the driver.
采用带有综合发动机控制装置的无级变速器对驾驶员要求的传动功率选择发动机工作点许可很大的自由度。
Intrusion alarm systems secure various entry points and have three key parts, namely the detectors, transmission channel and alarm controller.
入侵报警系统保卫各个入口点，主要包括三个部分，探测器，传输信道以及安装在家中的报警主机。
UPFC (Unified power Flow Controller) is always used to control the active and reactive power of transmission lines.
统一潮流控制器(UPFC)可以有效控制线路的有功和无功功率。
A unified power flow controller (UPFC) regulates the amount of active power and reactive power along the transmission line as well as the level of voltage of shunt busbar where the UPFC is installed.
统一潮流控制器(UPFC)的主要控制功能是潮流控制和电压控制，控制的水平由控制器的设定参考值决定。
The key technical issues about static synchronous series controller (SSSC), which is used in high voltage long distance power transmission, are researched in this project.
本项目主要研究应用于远距离输电的静止同步串联补偿器(SSSC)的关键技术。
CMOS digital image sensor and PIC18F4550 micro-controller with USB bus are applied to this sys - tem instead of the analog CCD camera to realize the digital acquisition and intelligent transmission.
系统运用CMOS数字图像传感器取代模拟CCD摄像机，采用带有usb总线的PIC18 F 4550单片机来控制和传输数据，实现了视觉检测前端数据采集与传输的数字化、智能化。
The tuned Interphase power controller (IPC) is a series connected power controller which has outstanding ability to control active power in transmission line and to limit the short circuit current.
调谐型相间功率控制器(IPC)是一种串联型控制装置，其突出特点是具有很强的线路有功输送功率控制能力和短路电流限制能力。
The present invention relates to a gear shift system, a controller of an automatic transmission and and a control method thereof.
本发明涉及车辆的变速系统、自动变速器的控制设备及控制方法。
The controller design to LPC2119 as processor, where measure, control and long-distance transmission are concentrated in, and through the sensor control valves switch.
控制器的设计以LPC 2119作为处理器，集测量、控制和远程传输于一体，通过传感器控制阀门的开关。
It includes that the bus controller PCI9054 action, the simulation of the CPU design with CPLD on the LOCAL bus side, configuration of EEPROM and the bus operation of the data transmission.
介绍了总线控制器pci9054的桥式作用、用可编程逻辑器件模拟LOCAL总线侧cpu的设计、EEPROM的配置以及总线的数据传输操作过程，然后在此基础上给出了数据采集系统的设计。
应用推荐