This article first presents the Dynamically Tuned Gyro(DTG) force feedback loop transfer model.
首先介绍了挠性陀螺力反馈回路的传递模型。
A three-dimensional heat transfer model based on the tool shape for FSW is present in this paper.
根据搅拌头形状与尺寸，建立了FSW三维传热有限元模型。
So the turbulent diffusivity in gradient transfer model of scalar should be a second order tensor.
因此，在用梯度准则模拟湍流输运时，其输运系数应是一个二阶张量。
The force transfer model and analytical method of the characteristics is put forward for the first time.
提出了纵扭复合型超声波电机的力传递模型和特性分析方法。
A computational heat transfer model to describe the freezing process of continuous casting slab is developed.
开发了一种描述连铸坯凝固过程的热传输数学模型。
By employing a comparative study, the article explores the transfer model of movable property ownership contract.
本文采用比较法的方法，就有体动产所有权合同移转模式进行了探讨。
The testing system of soil thermal conductivity is designed according to the reverse solution of heat transfer model.
介绍了土壤热导率的测试方法，根据传热模型反解法设计了土壤热导率测试系统。
A heat mass transfer model is constructed to take the variation of the scaling layer surface temperature into consideration.
据此提出了考虑垢层表面温度变化的描述结垢过程的传热传质模型。
There is almost no one doing about developing heat and mass transfer model during wood high temperature drying in our country.
特别是我国在建立高温干燥过程中的热质迁移的模型方面，几乎还无人涉及。
An energy equation that incorporates a heat transfer model of porous medium is developed based on the first thermodynamic law.
以热力学第一定律为基础，引入多孔介质换热模型，建立了多孔介质发动机的能量方程。
A heat and mass transfer model was set up, and the simulation results were found to be in accordance with the experimental data.
建立了过程的热质传递模型，比较模拟数据与实验数据，验证了理论模型有较好的适用性。
Pointed out the attitude of choosing the heat transfer model, provided the references for the choosing model in given situation.
并对传热模型的选取提出了自己的观点，为特定条件下如何选取合适的模型提供了一定参考。
Furthermore the large expense and long test time of field test have become the impediments to determine the load-transfer model.
同时，现行确定荷载传递模型的大型现场试验需要花费大量时间和经费。
The heat transfer coefficient of large tube rotary dryer was calculated by using particle transfer model of moving heating-plate type.
论述了应用基于移动加热板的颗粒热传递模型计算大型旋转管排式干燥机传热系数的方法。
A temperature measuring system based on LED light source is designed, and the transfer model and noisy model of every section is given.
设计了一种基于LED光源的荧光温度检测系统，给出了各个环节的传递模型和噪声模型。
Third, We propose the secure Transfer Model of network-component aiming at the distributed secure communication of the network-component.
第三，针对网络构件的远程安全调用提出了网络构件安全调用信任模型。
A dynamic heat transfer model based on the lumped parameter method was developed for cooling system of vehicle internal combustion engine.
提出了一个基于集总参数法的车用内燃机冷却系统动态传热模型。
Methods Infective disease transfer model were explored and the main principle and method of field epidemiological investigation were analyzed.
方法阐述传染病的感染和传播的基本模式，分析现场流行病学调查的基本原理和策略。
Based on the transfer model of current surplus Labour in the country, the factor of system is introduced and an expanded model is established.
本文在现有的农村剩余劳动力转移模型的基础上引入制度因素，构造了一个扩展模型。
From the results of heat transfer model, generally used critical solid fraction and limit solid fraction, the soft reduction zone was obtained.
结合传热模型计算的温度分布和普遍使用的临界固相率、极限固相率，得出了轻压下的压下区域。
This thesis begins with the analysis of secure requirement of network-component proposes the secure Transfer Model of network-component (STMNC).
本文就网络构件的运行安全调用提出了网络构件的安全调用信任模型。
The heat transfer characteristic of horizontal cryogenic vessel and the heat transfer model of non-loss storage for cryogenic liquid were introduced.
介绍了卧式低温容器的传热特点，以及低温液体无损贮存的传热模型。
On the base of thin film evaporation mechanism of the channel, a comprehensive heat transfer model for thermosyphon boiling in narrow channel is developed.
基于这种狭缝通道气泡底部薄液膜蒸发机理，建立了狭缝沸腾传热组合机理模型。
By analyzing the heat transfer law of lossless storage in cryogenic vessel, a heat transfer model was established and the differential equation was derived.
分析了低温液体容器无损存储时的传热规律，并建立了传热模型，得出了反映储罐绝热层温度变化的微分方程序。
Mathematic model simulation indicated that mass based transfer model is more appropriate than experiential decay model to explain the results of chamber test.
经验衰减模型与物质传输模型的对比分析表明，物质传输模型比衰减模型更有利于解释环境箱试验结果。
Heat transfer model and energy equations for porous plaque have been established, temperature distribution and variation of radiative heat flux are also found.
建立了泡沫多孔板的传热模型和能量方程，同时求得了板内烟气温度分布及辐射热流强度变化。
The working process model of the rotary vane simulated in the paper takes into account both the leakage and heat transfer model, so it is closer to the practice.
本文建立的旋叶式压缩机工作过程数学模型，综合考虑了泄漏模型与传热模型，更接近实际情况。
On this heat transfer model the differential equations were based, and the finite difference complete concealed grids were used in the numerical analysis computation.
根据喉部沉积的传热模型建立了偏微分方程组，采用有限差分完全隐式格式进行数值分析计算。
One of them is pure evaporation heat transfer model in the extended thin film region near the triple-phase contact line of vapor-liquid-solid at lower input heat flux.
一种是较低热负荷下的单一的微槽内三相接触线附近薄液膜区域中薄液膜的高强度蒸发换热机制（纯蒸发模式）；
Combining with particle impact heat transfer model, DEM method is also used to systematically simulate the heat transfer process in fluidized bed at the level of particle.
将DEM方法与颗粒碰撞传热模型结合，在颗粒层次上对密相流化床内的传热过程进行了较为系统的数值研究。
应用推荐