The drive features AB's Force Technology, a field-oriented control that permits independent control of speed and torque.
这个驱动器是 AB 电动技术的代表产品，它是一个定向控制可以分别控制速度和扭矩。
In rotation, force becomes torque, mass becomes moment of inertia, and acceleration becomes angular acceleration.
在旋转时，力变成力矩，质量变成转动惯量，加速度变成角加速度。
So we generate a torque which is proportional to the Angle, very similar to the linear spring whereby we generate a force which is proportional to the linear displacement.
所以产生一个力矩，和这个角成比例，就像线性弹簧，中产生的力矩和，线位移成比例。
Remember, torque is the rotational analog of the force.
扭矩是力转动的对应量。
And so the net, the sum of all forces on that object there is no net force on that wheel but there is a net torque, and that's why it's going to precess.
所以综合，物体受的所有力，车轮不会受到净力，但是有一个，净作用力，那就是我要推进的。
This causes the applied force to act as a torque, which therefore gives the ball a spin.
这将导致作用力产生一个扭矩，使球旋转。
Torque is the scientific term for turning force, and it is measured in newton-metres (Nm).
扭矩是一个用来描述扭转力的科学术语，它的单位是牛顿-米（Nm）。
Walking in high heels increased the normal torque forces at the knee by an average of 23%, which imposed a greater stretching force through the lateral knee ligaments.
穿高跟鞋让膝关节承受的压力平均增加了23%，膝盖韧带外侧承受了更大的压力。
I want to remind you that if we have a solid in a force field, we can measure the torque exerted by the force on the solid.
提醒你们，假设力场中有一固体，可以由力对固体的作用测量出其扭转力矩。
But I don't care about that force because I'm going to take the torque about point p.
但是，我不在乎这些力，因为我要取的是，点p的力矩。
Pump is the drainage and back into the groove of reasonable design, is a gear in the work under the minimum torque force, so the bearing load is small, wear small, pump with high efficiency.
输送皂角泵内有设计合理的泄油和回油槽，是齿轮在工作中承受的扭矩力最小，因此轴承负荷小，磨损小，泵效率高。
So the torque that I apply is bF, is this arm, so to speak, times this force.
,所以我用的力是bF，在这边，可以说，乘以力。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
On this basis, back electromotive force without load and with load is researched, simulated and analyzed, and cogging torque is analyzed and calculated in different dimensions of magnetic steel.
在此基础上，仿真了空载和负载下的电机反电动势，并且对不同磁钢尺寸下的定位力矩进行了分析计算。
The structural features of the developed 395DB clutch are briefly introduced, and the clutch′s torque capacity, temperature rise, slipping work and pedal force are reviewed.
简要介绍了设计的395DB离合器的结构特点，并对该离合器的传递扭矩、温升、滑磨功、踏板力进行了校核。
The methods for measuring control force and brake torque of the motorcycle brake are introduced and the factors affecting precision are analysed.
介绍了摩托车制动器操纵力和制动力矩的测量方法，分析了对测量精度的影响因素。
According to counterpoise torque curve, effect of magnifying force of several transmission schemes can be obviously viewed.
借助于平衡力矩曲线能够直观地看出不同传动方案的增力效果。
The paper focuses on the study of dynamics parameters that include flow rate, power consumption, torque and axis force of twin screw pulping extruder.
本文主要对双螺杆磨浆机的动力学参数(流率、功耗、螺杆扭矩和轴向力)进行了研究。
Through decoupling control of the torque windings and suspending force windings, the rotor of motor simultaneously have functions of producing torque and self-suspension.
通过对转矩绕组和悬浮力绕组的解耦控制，使电机的转子同时具有产生转矩和自悬浮的功能。
With the help of this optimization model, the optimized drill structure, which will generate minimum radial cutting force and torque, can be determined for different cutting conditions.
利用该优化模型对不同加工条件下的浅孔钻进行优化，得到使径向合力及扭矩为最小时的钻头结构参数。
The results also predict that the roll force and the roll torque increase with the increase of the feed velocity.
随着芯辊进给速度的增大，轧制力和轧制力矩也相应增大，因此对轧环机力能参数的要求也提高；
The formulae of roll force and torque are verified by ring rolling experiment.
根据环件辗扩实验结果，对文中的辗扩力和力矩计算公式进行了验证。
Time waveform replication technology can convert measured spindle loads (force and torque) from an earlier model vehicle into spindle displacements.
时域波形再现技术可以把在原有模型车上测量到的轮轴载荷(力和力矩)转换为轮轴位移。
Torque is the twisting force that the engine produces.
转矩是指发动机产生的扭转力矩。
Longitudinal force comes from the torque applied to the tire by the engine or by the brakes.
发动机或者刹车用于轮胎的作用力的纵向分力。
The optical force and torque of a micro-propeller-shaped rotor driven by TEM00Gaussian laser beam are calculated with a geometric-optics model.
在几何光学模型近似下，对用TEM 00高斯激光束驱动微型螺旋桨结构的光驱动力和力矩进行了理论计算。
The research results show that the average axial cutting force and torque of common drill-grinding are greater than that of ultrasonic drill-grinding.
得出普通钻磨时的轴向平均切削力和平均扭矩均远大于超声钻磨加工时的轴向平均切削力和平均扭矩；
In the test, the computer data collection system has been applied to measure rolling force, torque and power in rolling procession.
实验中对轧制压力、轧制扭矩、轧制功率进行了测试，并将单头和双头模具所测得的结果进行了比较与分析。
The results showed that the buckling configuration was helical curve for the gravitational tubular under the axial compressive force and torque.
结果表明，受压扭组合作用的有重管柱的屈曲构型为上疏下密的螺旋曲线。
The results showed that the buckling configuration was helical curve for the gravitational tubular under the axial compressive force and torque.
结果表明，受压扭组合作用的有重管柱的屈曲构型为上疏下密的螺旋曲线。
应用推荐