The performances and applications of some composite ceramic tool materials were presented in this paper.
介绍了一些复合陶瓷刀具材料的性能和应用。
Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.
黑色工具材料以铁为基材，包括工具钢，合金钢，碳钢，铸铁。
A model for designing functionally gradient ceramic tool materials with symmetrical composition distribution is presented.
提出了对称型双向分布的梯度功能陶瓷刀具材料的设计模型。
The experimental results show that the tool materials and cooling condition have obvious influences on material removal rates.
结果表明：刀具材料和冷却方式是影响玻璃陶瓷材料加工去除的主要因素。
All these characteristics may not be found in a single tool material. Improved tool materials have been giving a better cutting performance.
所有这些特性不可能存在于单一刀具材料中。改进的刀具材料已经被赋予较好的切削性能。
PCBN is one kind of the important superhard tool materials and is widely supposed to be an ideal tool material for modern cutting technology.
PCBN刀具是一种重要的超硬材料刀具，被广泛认为是应用于现代切削加工的理想刀具材料。
Various cutting tool materials have been used in the industry for different applications. A number of developments have occurred in the current century.
在工业中为了不同的应用可以使用各种各样的切削刀具材料。在最近的百年里产生了许多进展。
It is finally pointed out that the main wear mechanisms of the ceramic tool materials are still abrasive, adhesive, chemical reaction and dispersion wear.
指出陶瓷刀具材料切削磨损时的基本机理仍然是磨料磨损、粘结磨损、化学反应与扩散磨损。
The process problems in heavy lathe machining, such as the selection of tool materials, tool angles, cutting parameter, and the mount of tools are analyzed.
对重型车床切削中的刀具材料、刀具角度、切削用量的选择以及刀具安装等工艺问题进行了分析。
The influence of sintering temperature and holding time on the density, micro-structure and mechanical properties of the ceramic tool materials are studied.
对烧结温度、烧结时间等工艺参数对材料力学性能、微观结构和致密度的影响进行了分析。
This article states machined properties of part's material, properties of cutting tool materials and some structure of cutting tool that used in large flat surface.
本文从实用出发，系统介绍了适用于制作大型平面材料的切削性能以及适用于大型平面精铣的几种刀具结构和使用情况。
This paper explains the character of tool materials, tool geometry and small combined boring tools for machining aluminum alloy on the basis of the practice and research.
以摩托车发动机箱体及箱盖的加工自动线刀具为例，指出加工铝合金时刀具材料和几何角度应注意的问题，另外对小孔加工复合刀具进行详细的说明。
The formation of the fatigue cracks and the thermally induced cracks are mainly responsible for the failure of the ceramic tool materials under various cutting conditions.
在不同的切削条件下，疲劳裂纹和热裂纹是造成刀具材料失效的主要原因。
The formation of the fatigue cracks and the thermally induced cracks are mainly responsible for the failure of the ceramic tool materials un der various cutting conditions.
在不同的切削条件下，疲劳裂纹和热裂是造成刀具材料失效的主要原因。
The author gave us the reasonable selection of tool materials, tool parameters and cutting parameters during turning of hardened steel in order to get the ideal cutting result.
着重说明了车削淬火钢件时，如何通过合理地选用刀具材料、刀具几何参数及切削用量达到理想的切削效果，并提出车削淬火钢件时应注意的若干问题。
For some applications, especially where extremely high-speed cutting is important, other tool materials such as sintered carbide products are a more economical alternative to tool steel.
对一些应用来说，尤其是非常高速的切削很重要的场合，其它的工具材料比如硬质合金产品是比工具钢更经济的选择。
Physical and cutting performance of PCBN tool materials are introduced in this paper, and the features of them used in different cutting fields are given. The key technology is also discussed.
介绍了PCBN刀具材料的物理性能和切削性能，阐述了PCBN刀具在不同切削领域应用的特点，并对其关键技术进行了探讨。
The method of improving the thermal shock resistance of ceramic tool materials i. e. using functionally gradient ceramic tool materials, is discussed and verified by intermittent turning tests.
讨论了提高陶瓷刀具材料抗热震性的方法即采用梯度功能陶瓷刀具材料，并结合断续车削试验进行了验证。
A global review of dry cutting tool materials in cutting of the roller and their physical and cutting performance are given, and also promotes the features of them used in cutting of the roller.
综述了轧辊加工中干式切削刀具材料的物理性能和切削性能，阐述了它们在轧辊加工中的特点。
At the same time, gas turbine blades, bearing materials and cutting tool materials were evaluated by Weighted Average, Improved Grey Relational Analysis (IGRA)and Fuzzy Assessment, respectively.
此外，运用加权平均法、改进灰色关联度法和模糊综合评价法分别对候选燃气涡轮叶片材料、轴承材料和刀具材料进行了评价。
Main products are round log handle of besom, mopstick, shank of tool, handle of beach parasol as well as processing a wide range of wooden craftwork materials.
主要产品有圆木柄、扫把柄、工具柄、沙滩伞柄以及加工各种木制工艺品材料。
Chopsticks, the simplest and most effective eating tool, can be made of a variety of materials, such as bamboo, wood, lacquer, jade, ivory, plastic, aluminum, silver and gold.
制作筷子这一最简单、最有效的进食工具所使用的材料可以多种多样，如竹子、木材、漆器、玉石、象牙、塑料、铝、银、金等。
The course materials should therefore ideally be customized to deal with such situations in order to explain the new mode of operation and properly position the best practices of the new tool.
因此，课程材料应当被个性化定制，从而在这种情况下解释操作的新模型，并且适当的安置新工具的最佳实践。
For newcomers to Spring, this will provide tool-guided assistance through tutorials and walk-troughs that integrate the excellent Interface 21 Spring training materials.
对于Spring的新手而言，该功能会通过教程和内置的Interface21的Spring精彩培训材料为他/她提供工具向导。
Small angle neutron scattering (SANS) technique is a powerful tool for nanometer structural analysis of materials.
中子小角散射技术是研究纳米尺度范围材料结构的有力工具。
Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.
可以用于铸造的材料类型有：铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。
Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.
可以用于铸造的材料类型有：铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。
应用推荐