The porous titanium coating with the graded apatite is expected to be applied in clinical orthopedics to enhance bone implant bonding strength.
具有表面梯度磷灰石涂层的多孔钛有望用于临床矫形，以提高种植体的生物活性和骨结合强度。
Our out-source titanium coating factory went out of business of the end of 2014. After that, we were looking for other titanium coating factory.
我们的钛涂层厂走出了2014年之后结束了业务，我们正在寻找其他的钛涂层工厂。
The first they dealt with by coating the top of the device with oxides of hafnium, molybdenum and titanium, in layers about 100 nanometres thick.
第一，他们在装置的上处理和涂上铪，钼，钛氧化物层，这层物质仅有100纳米厚。
Comprising of seven tiny layers — each one is 50-100 nanometers in height — the coating is made of silicon dioxide and titanium dioxide nanorods positioned at an oblique Angle.
涂层组成于7个微小的层面，每个层面的高度在50到100纳米之间。涂层材料是由具倾斜角度的二氧化硅和二氧化钛的纳米棒组成。
Comprising of seven tiny layers, each 50 to 100 nanometers in height, the coating is made of silicon dioxide and titanium dioxide nanorods positioned at an oblique Angle.
涂层组成于7个微小的层面，每个层面的高度在50到100纳米之间。涂层材料是由具倾斜角度的二氧化硅和二氧化钛的纳米棒组成。
Titanium nitride coating can decrease corrosion tendency and improve corrosion resistance of dental casting alloys, especially of non precious alloys.
氮化钛涂层可降低牙科铸造合金，尤其是贱金属合金的腐蚀倾向，提高其耐蚀性。
The carbon fiber is the main reinforcer for titanium diboride coating material, and greatly influence the properties of titanium diboride coating cathode.
碳纤维是硼化钛涂层材料的增强剂之一，对硼化钛阴极涂层的性能影响很大。
In all the potassium titanate coating blood-compatibility surpasses the titanium alloy.
钛酸钾涂层的血液相容性更优于钛合金合金。
By optimized the processing technique of potassium titanate, the author in situ synthesized potassium titanate coating on the surface of titanium alloy.
通过优化钛酸钾晶须制备工艺参数，在钛合金表面原位合成了钛酸钟表面功能涂层。
Titanium nitride coating has great application in industry owing to its superior properties, such as good wear and corrosion resistance, low friction coefficient and good thermal barrier properties.
氮化钛涂层因具有良好的耐蚀性、耐磨性及低的摩擦系数在工业上得到广泛应用。
The microstructure of the Fe-based clad composite coating reinforced by in-situ particles was investigated, using laser clad FeCSiB powder added with niobium and titanium.
研究了单独添加不同含量的铌与复合添加铌、钛时激光熔覆铁基原位生成颗粒增强复合涂层的组织特点。
The corrosion protection practice showed that the tubes with protective coating of nano titanium polymer and alloy tubes with tungsten-plating performed well in the corrosive environment.
实践表明，“钛纳米聚合物防腐蚀涂层油管”和“镀钨合金防腐蚀油管”在上述环境使用较为适合；
A new method was explored to make a new type bioactive graded coating on titanium alloy for medical use and to improve its adhesive strength and stability.
本工作的目的是探索制备钛合金表面生物活性梯度涂层的新方法，提高涂层的结合强度及稳定性。
As a result, manufacturing HA as a coating on the surface of titanium alloy is the best effective approach of combining the bioactivity of HA and the strength of the titanium alloy.
因此，制备在钛及其合金表面涂覆HA涂层的生物医用复合材料是综合利用二者各自优点的最有效途径。
To investigate the effect of titanium nitride coating on corrosion resistance of dental casting alloys.
研究氮化钛涂层对牙科铸造合金腐蚀性能的影响。
The biomimetic mechanism of inorganic materials is discussed under mediation of variable organic templates and coating of phosphates on titanium surface by self assembling method was studied.
进一步进行了以自组装方法在钛表面镀磷酸盐的研究，探讨了在变动的有机模板调制下无机材料的仿生合成机理。
The technology of preparing Hydroxyapatite (HA) - Bioglass (BG) compound coating on a non-line-sight titanium alloy substrate was realized by electrophoretic deposition (EPD).
采用电泳沉积工艺，在非线性形状金属表面成功制备出了羟基磷灰石(HA)—生物玻璃(BG)复合涂层。
The results show that the corrosion potential of the Ti coating sprayed in vacuum is much higher than one of the Ti coatings sprayed in air and in argon, but a little lower than one of pure titanium.
在真空中喷涂的钛涂层基本上没有氧化物和氮化物，其衍射图谱与纯钛十分接近；
The design of different kinds of coatings on titanium alloy was overviewed and some Suggestions on how to improve the bonding strength between bioactive ceramic coating and substrate were made.
本文对钛合金表面不同类型涂层的设计进行了综合评述，并对如何提高生物活性陶瓷涂层与基体的界面结合强度提出建议。
OBJECTIVE: to prepare a bioactive coating on the surface of the titanium alloy implant, and to evaluate one promising strategy to enhance osseointegration.
目的：在钛合金种植体表面制备生物活性涂层，寻找一种有效促进骨整合的方法。
For titanium based materials we are looking for methods of surfaces coating, machining or other titanium linked processes.
钛基材料方面，我们寻求表面涂层、加工或其他与钛相关工艺的方法。
Objective: To evaluate the influence of air oxidation, anodizing and tin coating sample on elemental composition and thickness of surface film of cast pure titanium.
目的：评价大气热氧化、阳极氧化和氮化钛镀膜对铸造纯钛表面膜组成和厚度的影响。
A new composite sintered coating on artificial roots of tooth made of titanium alloy was made by a two step sintering method.
采用两步烧结法制备了新型的钛合金牙根种植体表面复合涂层。
Through the anodic oxidation, the porous coating on titanium materials has been achieved.
通过阳极氧化法，在钛合金表面制备了多孔形貌的涂层。
Conclusions: after pure titanium plates pretreated, porous network oxide films were formed on the surface and after soaked in SBF and 1.5sbf, a HA coating could be precipitated on the oxide films.
结论：预处理后可在纯钛表面形成多孔网状结构的氧化膜，经仿生液处理后在氧化膜表面沉积了羟基磷灰石涂层。
The effective factors on the vaporization rates of titanium and the effect of N2-pressure on TiN-coating are studied in the paper.
本文主要研究钛蒸发速率的影响因素和氮分压对涂层的影响。
The growth of the improved titanium convertion coating is similar with the single titanium convertion coating.
膜层生长情况与单一钛盐转化膜成膜类似。
The technology of coating mica particles with titanium dioxide by liquid deposition method to prepare titanium-coated mica pearl pigment was studied.
研究了用液相沉积法在云母颗粒表面包覆二氧化钛膜制备云母钛珠光颜料的工艺。
The invention discloses a titanium-hydroxylapatite gradient coating and preparation method and application thereof.
本发明公开了一种钛-羟基磷灰石梯度涂层及其制备方法与应用。
The invention discloses a titanium-hydroxylapatite gradient coating and preparation method and application thereof.
本发明公开了一种钛-羟基磷灰石梯度涂层及其制备方法与应用。
应用推荐