Through simulation, test data collated graphics processing, and control the results of theoretical calculations.
通过模拟计算、试验数据整理、图形化处理，并对照理论计算的结果。
Through to the analysis of the simulation test in the lab and the test data in the field, the authors discussed TDR monitoring landslide practical application effect and validity.
通过对室内模拟试验和野外应用试验数据的分析、对比，讨论了TDR监测滑坡的实际应用效果和有效性。
The simulation test was completed through two mechanical design cases. The result shows that the algorithm has high efficiency, rapid speed of convergence and strong capability of global search.
最后通过对两个机械优化设计实例进行仿真试验，结果表明本算法求解效率高、收敛速度快、全局搜索能力强。
Through careful simulation and test, the conventional linear guide vanes have been replaced by flexural ones.
经过精心的模拟和测试，传统的直线型导叶已经被歪曲流线型导叶所取代。
Through the artificial freezing earth simulation test, the physical and mechanic variation laws of the freezing structure are gained.
主要是通过人工土冻结模拟试验，得出冻土结构物的物理力学变化规律。
Based on the characteristics of earthquake simulation test, a concept of fluid dispensation coefficient is developed through the analysis of typical strong motion velocity records.
本文针对地震模拟试验的特点，通过对具有代表性的强震地震速度记录的分析，建立了油源供油量系数的概念。
Through MC simulation test, the relation of average grain size and Monte Carlo steps was established and the parameters of MC model were work out by the method of regression analysis.
运用MC模拟试验，建立了平均晶粒尺寸与蒙特卡罗步数之间的关系，利用回归分析方法确定了MC模型常数。
It is considered that the hydrolysis acid and AA are the double substrates in the oscillating reaction through the comparison of simulation test.
通过与模拟实验进行比较，认为水解产物乙酰乙酸与AA一起充当了振荡反应双底物的角色。
Hypersonic viscous interaction effects on measurement of free stream pressure in test section are studied through theoretical analysis, experiment measurement and numerical simulation.
通过理论分析、实验测量和数值模拟，研究高超声速粘性相互作用对实验段自由流静压测量的影响。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
Through vibration simulation test on the room flask vibration table, the acceleration of different flexible dispersed grain material under vibration condition was tested.
通过室内砂箱振动台震动模拟试验，测试了不同柔性散粒材料在震动条件下的加速度值，对其减震性能作了一些初步的探讨。
This paper introduces the frame and function of underwater vehicle control and guidance hardware-in-the-loop simulation system in detail, which actor as the test flat, through.
本文对水下航行器制导控制半实物仿真系统的结构和功能作了详细介绍，并以此半实物仿真系统为试验平台，通过试验对实时调度算法进行应用和验证。
Through computer simulation test the influence of the above parameters upon grain trajectories and grain losses were studied, which is necessary for guiding the further experimental work.
通过计算机模拟实验，研究了运动参数与结构参数对籽粒运动轨迹和落粒损失的影响规律，为台架实验奠定了理论基础。
In order to reappear the fuze movement rule through testing the parameter of movement under simulation trajectory environment, the missile-borne memory test system is designed in the thesis.
为了通过测试引信在模拟弹道环境下的运动参数，再现其运动规律，本文研制了新型弹载存储测试系统。
The developing steps of simulation test software, test interface and flow chart of its applying procedure are introduced through an example of pneumatic supplies selecting device.
以气动物料分拣装置为例，深入分析了仿真测试软件的开发步骤，详细介绍了相关的测试界面、仿真应用程序流程图。
And the progress of construction through analysis and optimization, simulation run major business process improvement, test the feasibility of the method and effectiveness.
并通过施工总进度分析与优化、主要业务流程仿真运行改进，验证了该方法的可行性及实效性。
Through the calibration and simulation test in the lab, the performance of monitoring system was verified.
通过标定试验和室内模拟试验，验证了样机的性能。
On the other hand, adopt network simulation software NS2 to prove and compare four kinds of algorithms through the way of the simulated test.
另一方面，采用网络模拟软件NS2通过对实际网络元素模拟试验的方式对四种算法进行验证和比较。
The leaking time of glass pearls was measured through the system, and the measurement result coincides with that of theory computing, which shows the simulation test system is feasible.
模拟试验系统首先测量了微径玻璃珠的排流时间，与应用准流体排流经验公式计算出的结果吻合，验证了试验系统的可用性。
It takes an effective pressure test through large-scale simulation in mobile services.
通过大规模的移动事务模拟，有效进行了压力测试。
A digital electronic controller was manufactured, the control software design was accomplished, and the control system hardware-in-the-loop simulation test was carried through.
制造的数字电子控制器，控制软件设计完成，并控制系统的硬件在环仿真试验进行通过。
It indicates that finite element simulation is feasible and exact through comparing between simulation result and test result.
通过计算值与试验结果的对比证明，有限元模拟具有一定的可行性和准确性。
On this basis, it is through a series of experiments, including drop hammer experiment, high-speed rotating floor experiment and dynamic simulation experiment to test the performance of the receiver.
在此基础上，通过开展落锤试验，高速转台试验，以及高动态模拟试验测试接收机的整体性能测试。
Consequently, the method in the dissertation is proved through calculating the similarity between the numerical simulation data and physical test data of satellite momentum wheel bearing assembly.
通过卫星动量轮轴承组件的数值仿真和物理试验数据的相似度计算实例验证了本文评估方法。
Through off-line simulation, hardware-in-the-loop test and road test, the control algorithm is debugged and the control parameters are calibrated.
通过离线仿真、硬件在环试验以及道路试验调试控制算法，标定控制参数。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Through academic analyse, model simulation, practical test, this dissertation is to obtain the feasible method of a wide-dynamic-range direct detection millimeter-wave receiver front-end.
论文主要研究的内容是，通过理论分析、建模仿真、实物测试等环节研究出一种大动态直接检波式毫米波接收前端。
Through comparison calculations between FNN simulation and traditional method using exiting test data, the predicted result of FNN is more accurate than that of the latter.
通过对已有的钻芯、回弹试验数据的对比计算，其强度预测精度高于常规的综合方法。
Through the two different methods, this paper discusses how to develop the experimental simulation software: tensile test, compressive test, strain measurement of Young modulus and Poisson ratio.
通过以上两种不同的模拟方法，本论文分别阐述了拉伸破坏实验、压缩破坏实验以及电测法测定材料弹性模量和泊松比的仿真软件设计与开发的方法。
Through the two different methods, this paper discusses how to develop the experimental simulation software: tensile test, compressive test, strain measurement of Young modulus and Poisson ratio.
通过以上两种不同的模拟方法，本论文分别阐述了拉伸破坏实验、压缩破坏实验以及电测法测定材料弹性模量和泊松比的仿真软件设计与开发的方法。
应用推荐