In the thesis, we carried through numerical simulation and experimental study of the stretching process of float glass.
本文对浮法玻璃拉边过程进行了数值模拟和实验研究。
In this dissertation, the mechanical mechanism of soil-roots composites is studied through numerical simulation and experimental study.
本文从复合材料细观力学的角度，对植物根系加固土壤的力学机理进行了数值计算和实验研究。
In this paper, the microbuss temperature field and velocity field is researched through numerical simulation and experiment for the first time.
本文首次采用数值计算和试验相结合的方法对微型面包车车室内温度场、速度场进行了研究。
Through numerical simulation and optimization analysis, the effect of underground mining on the surface movement and the seepage field are revealed.
通过数值模拟和优化分析，揭示地下开采对地表岩移和渗流场的影响规律。
Through numerical simulation and analysis, the top coal movement and stress distribution in mechanized top caving mining of thick coal seam is revealed.
通过数值模拟分析，提示了厚煤层综放开采时顶煤运移和应力分布规律。
The paper outlined the main structure and working principle of the system and verified its effectiveness through numerical simulation and engineering tests.
本文概述了系统的主要结构与工作原理，并应用数值仿真和实际工程试验验证考核了系统的有效性。
On the basis of the disease evolution of Xinzhuangling Highway Tunnel in loess, the disease reasons are analyzed through numerical simulation and field observation.
针对新庄岭黄土公路隧道地表裂缝和衬砌开裂的病害特征，探讨了病害产生机理，并运用仿真、实测等手段详细分析了病害原因。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
The formula of the electric field distribution through CST and the numerical simulation, simulation results with theoretical analysis concluded unanimously.
并通过三维电磁场软件进行了数值模拟，模拟结果与理论分析所得结论一致。
Through the comparison of numerical simulation value and experiment results, the range of reduction ratio was obtained while the tube forming ideality.
通过数值模拟与实验结果的比较，得出了获得较理想的成形薄壁筒形件时减薄率的选取范围。
Through experimental and numerical simulation researches on the influence of cooling wall on the ventilation characteristics and the air flow characteristics of UFAD system firstly.
首次通过实验和数值模拟方法研究了具有冷却壁面条件时的下送风通风空调系统的气流流动特性及其影响。
Through the electromagnetic numerical simulation, it carried out the study of the correlation on the magnetic design and the performance of MR damper.
通过对磁流变阻尼器的电磁学数值模拟，研究了磁路设计与磁流变阻尼器性能的相关性。
Hypersonic viscous interaction effects on measurement of free stream pressure in test section are studied through theoretical analysis, experiment measurement and numerical simulation.
通过理论分析、实验测量和数值模拟，研究高超声速粘性相互作用对实验段自由流静压测量的影响。
Through numerical simulation, the characteristics of goaf flow field and gas transportation under J-shape and U-shape ventilation systems were analyzed.
通过数值模拟，对比分析了J型通风和u型通风条件下的采空区流场及瓦斯运移特征。
Through the microstructure analysis and residual stress measurement on a quenching test-piece, the feasibility of the numerical simulation is proved.
通过对淬火试件进行金相组织分析和残余应力测量，验证了数值模拟的可行性。
Through the analytical calculation and numerical simulation, additive white noise can't induce molecular motor to produce direct motion.
通过解析计算和数值模拟得到，加性白噪声不能驱动分子马达产生定向运动；
Temperature and flow fields, and interfaces of water freezing in soil and crude oil solidifying in the pipeline were obtained through numerical simulation.
通过数值模拟，获得了停输期间温度场、流场以及土壤水分结冰界面和管道中原油凝固界面的分布情况。
In this paper, through numerical simulation, reasonable layout of ventilation outlet and optimal configuration are researched.
通过数值模拟，对机械排风口的合理布置位置和最佳配置方式进行了研究。
Through a comprehensive analysis on various dynamic monitoring data and a large amount of fine numerical simulation study of dense grid, it makes clear the residual oil distribution.
通过各种动态监测资料综合分析和密网络大规模精细数值模拟研究，搞清了剩余油分布状况。
Through the numerical simulation to transient analysis in heating networks, it is consult value and guide significance for the water hammer protection measure.
通过数值模拟方法分析供热管网的瞬变流动工况，对研究供热管网的具体水锤防护措施有参考价值和指导意义。
Through theoretical analysis and numerical simulation, the pattern reconfigurable feasibility of the structures of butterfly, folded dipole and double-feed is analyzed.
本文通过理论分析和软件数值仿真，分析了蝶形结构、折合偶极子结构以及双馈方式实现方向图可重构的可行性。
Through the way of numerical simulation and locale measurement, we found the safety utmost bedrock ply at the condition of thin bedrock and thick coal seam in Sima coal Mine.
通过数值模拟和现场实测的方法，研究了司马矿薄基岩厚煤层开采条件下，保证安全开采的极限基岩厚度。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
Through numerical simulation, the influence for worm control of anti worm appearance time and the anti polices is analyzed.
通过数值模拟，分析良性蠕虫出现早晚及良性蠕虫的不同对抗策略对蠕虫传播控制的影响。
The location of soleplate line and the thickness the minimum rock cover are further studied through numerical simulation.
根据数值模拟结果进一步确定象山港海底隧道的底板线位置和最小岩石覆盖厚度。
Damping model of er fluid which included the viscous and hysteresis damping is established and proved to be effectiveness through Fourier transformation and numerical simulation.
建立了由粘性阻尼和迟滞阻尼组成的电流变流体阻尼模型，通过对模型的傅立叶变换及数值仿真，验证了理论分析及阻尼模型的正确性。
In this paper, by using the 2 5-dimension MHD equations, the complicated process of the interaction between the CME and helmet streamer is studied through numerical simulation.
本文采用了2 5维MHD方程，用数值模拟方法研究了CME和冕流结构之间复杂的相互作用过程。
Through optimization of numerical simulation, thermal recovery design and corresponding oil recovery technology, the reasonable development policy is determined and some good results have been gained.
通过数值模拟优化、热力开采设计及相应的采油工艺配套设计，确定了合理开发对策，取得了较好开发效果。
Through optimization of numerical simulation, thermal recovery design and corresponding oil recovery technology, the reasonable development policy is determined and some good results have been gained.
通过数值模拟优化、热力开采设计及相应的采油工艺配套设计，确定了合理开发对策，取得了较好开发效果。
应用推荐