By comparison, their drawbacks are also pointed out Preparing thin and continuous films with nanopaticles is the ultimate goal.
提出了沸石膜合成的目标：合成由小晶粒组成的薄而连续的定向膜。
Dieters could not see the "immeasurably thin" terminal branches of the dendrites and, like many others, inferred from his observations that they must fuse to form a continuous network.
Dieters不能看到具有“不能测量的纤细”的树突分支，而且，像许多其他人一样，从他的观察中，能够得出神经元在末端处融合在一起，从而构成一个连续的神经网络。
The key technique for manufacturing this heat exchanger is the continuous pressure moulding of long plates and welding of thin plates.
较长板片的连续压制成型和薄板片间的焊接是制造该换热器的关键技术。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
This so-called greatest happiness of law reducing weight - meat law reducing weight, heard that only the first week can minus 10-12 jins fat, continuous meat also can thin more and not easy rebound.
这种号称世界上最幸福的减肥法——吃肉减肥法，听说只有第一周就能减去10 - 12斤脂肪，连续吃肉还能瘦得更多，而且不易反弹。
With the continuous improvement of integration, the thickness of IC insulating layer is more and more thin.
随着集成度的不断提高，集成电路的绝缘层越来越薄。
The structure would be insulating, continuous, lightweight, precise and extremely thin.
这个结构将是绝缘的，连续的，轻量级的，精确的和非常薄。
The structure of thin-walled box girders are commonly applied in some large span continuous beam bridges and rigid frame bridges in our country.
我国已建成的一些大跨径连续梁桥及大跨径连续刚构桥都普遍采用薄壁箱形截面。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
When a thin plate is heated by a beam of modulated continuous laser, a temperature wave generates and propagates along the plate with amplitude decay and phase delay.
通过连续激光调制对薄板试样进行局部周期加热，采用红外扫描测温技术记录动态温度分布。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.
计算表明，电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。
Electromagnetic braking on flow field of molten steel in the thin-slab continuous casting mold is analyzed by mathematical modeling and experiment.
采用模型实验结合数值模拟的方法分析了薄板坯连铸结晶器的电磁制动过程。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
This paper describes the characteristics of medium and thin slab continuous caster in detail and the principles must be observed to fit these characteristics during designing the casting powder.
详述了中薄板坯连铸机的特征，以及保护渣设计过程中，为适应这些特征所必须遵守的原则。
The continuous parameter model which was used to investigate the splitter vane rotor was introduced. The blades of the model were Timoshinko beam and the disc was treated as thin plate.
给出了用于研究大小叶片整体叶盘结构固有振动特性分析的连续参数模型。
The vortex flow and mold flux entrapment in the thin slab continuous casting mold was investigated using a 1/4 scale water model.
利用1/4水模型对薄板坯连铸结晶器内的涡流及卷渣行为进行观察研究。
Using incompressible MHD equations and zero equation turbulent model, the paper calculated the flow field in two dimension thin slab continuous casting mould with the electromagnetic brake(EMBR).
本文采用不可压缩MHD方程及零方程湍流模式，数值计算了加电磁制动器的二维薄板坯连铸结晶器中的流场。
This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.
利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。
Macroscopic fluid flow and heat and mass transfer should be taken into account for the continuous thin slab casting process.
薄板坯连铸工艺应综合考虑传热、流动与传质宏观传输现象。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
It shows that thin slab continuous casting has a greater secondary cooling intensity, a faster solidifying rate, a fine and uniform structure and less segregation than conventional slab casting.
研究表明，薄板坯的二冷强度大，凝固速度快，组织细小、均匀，其内部溶质元素的偏析程度远低于传统连铸板坯。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
The production and technical situation of thin slab continuous casting with FTSC process in Tang Steel are introduced briefly.
简要介绍了唐钢FTSC工艺薄板坯连铸的生产技术情况。
In this paper, mathematical model and FEM software for the simulation of thermal process during continuous casting and rolling of thin slab were developed.
本文针对连铸连轧的热过程，建立了各工艺的热过程的数学模型，并开发了相应的软件。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
应用推荐