Theory analysis and calculation of the rectangular waveguide longitudinal slot arrays are made by using moment method.
利用矩量法对矩形波导宽边纵缝阵列天线进行了理论分析和计算。
Second, classic hydrodynamic theory, least square method and difference method are exerted to cargo pump's mathematic model for theory analysis and calculation.
其次，运用经典流体力学理论对液化气船舶的货泵进行了理论分析，利用最小二乘法和插分法对货泵的工况点进行了求解；
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with documents.
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
An approximate formula of linear error about TS-B3 temperature sensors and calculation methods about circuit parameter were given by theory analysis.
通过理论分析，给出了TS -B3型温度传感器线性化误差的近似计算式及电路参数的计算方法。
Through the theoretical calculation and result analysis, the driving theory characters and design principles of channeled-vacuum-drum are obtained.
通过理论计算与结果分析，得出了槽式真空滚筒的传动理论特点及设计原则。
Expatiated on the application theory of basic orbit, including subastral point calculation, visibility analysis, coverage evaluating and spacecraft life-span estimate.
阐述了基本轨道应用分析理论，包括星下点轨迹计算、可见性分析、覆盖评估和轨道寿命估算。
Theoretical analysis, numerical calculation and experimental study are tarried out for this kind of antenna, by use of the theory of two-dimensional periodic admittance surface.
本文对上述天线应用二维周期导纳表面理论进行了初步的理论分析、数值计算和实验研究。
The classical homogeneous nucleation theory was adopted. The theoretical analysis and numerical calculation of water vapor condensation process were completed by means of the characteristic method.
本文采用经典成核理论，将特征线方法应用到水蒸汽凝结过程，进行了理论分析和数值计算。
A new method for reliability analysis and calculation of the gray maintainable system is put forward using the gray theory under the condition of lacking information from its practical state.
从灰色可维修系统实际工作状态出发，在缺乏信息的条件下，运用灰色理论，提出其可靠性的分析计算新方法。
By calculation and analysis being relative to fuel economy in automobile engineering theory, some shortages of measurement methods of fuel consumption for light-duty vehicles in use are indicated.
针对我国现行轻型汽车燃料消耗量试验方法，运用汽车工程理论进行了有关计算分析，指出该方法存在的不足。
Numerical calculation and simulation are developed on the basis of theory analysis, numerical result and theory analysis are compared and discussed.
在理论分析的基础上对其进行了数值计算与模拟，并将数值结果与理论分析相比较，进行分析讨论。
This paper expounds the application of "graph theory" in machinofacture, Such as, analysis of process engineering, calculation of technological dimension chain and assemblage dimension chain, etc.
阐述“图论”在机械制造中的工艺过程分析、工艺尺寸链和装配尺寸链的计算等方面的应用。
Based on the fractal geometry theory and the survey of the on-site rock mass, the statistical analysis, the network simulation and the fractal dimension calculation of the structural planes were made.
基于分形理论和现场岩体结构面调查，对岩体结构面进行了统计分析、网络模拟和分形维数计算。
Based on the security time limit theory, the calculation method for the consumption amount of the appointed time and some examples of reliability analysis were presented.
基于“安全期限理论”，提出了直升机使用期限消耗量的计算方法，并进行了实例的可靠性分析。
Through analysis and calculation of heat efficiency and Exergy efficiency, the paper proves this Exergy theory is far more accurate to reflect the actual feature of energy using.
通过(火用)平衡与热平衡的对比分析和热效率与(火用)效率的分析计算，论述了(火用)平衡能更科学、更准确地反映轮窑实际用能状况。
By raising a solving method based on the game theory, the technical method and calculation steps of the game analysis on the multi-objective problem are established.
提出了基于博弈分析思路的求解方法，建立多目标问题博弈分析的技术路线和计算步骤。
A solving method based on game theory was proposed, and the technical path and calculation steps for game analysis were established.
提出一种基于博弈分析思想的求解方法，建立多目标问题博弈分析的技术路线和计算步骤。
Chapter II briefly introduce the linear regression analysis theory and methods of calculation.
第二章简要介绍线性回归分析的相关理论和计算方法。
The theory solution was acquired by thermal analysis and was identified by thermal calculation.
通过热力学分析获得了发动机性能的理论解，并利用热力计算进行验证。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with do...
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
Based on fracture mechanics and finite element theory, calculation and analysis stress intensity factor of fiber asphalt chip seal under different conditions.
基于断裂力学和有限元原理，计算分析了纤维沥青碎石封层路面结构在不同条件下的应力强度因子。
The force analysis and calculation of gripper guarantee the enough gripping force and avoid the theory basis and guarantee for the gripper reliable working .
夹具的受力分析与计算，确保了夹具具有足够的夹持力， 使夹具在生产中不会发生掉块现象，为夹具可靠地工作， 提供了理论依据和有力保障。
This paper introduces the systems theory and frequency analysis approach, which bases on the calculation of groundwater resources in Balasu Northern Shaanxi Energy.
本文以陕北能源化工基地巴拉素水源地为例，采用系统理论和频率分析法对地下水资源进行了计算。
CAD system for retaining wall is developed through analysis and research on calculation theory, common drawing process and general cross section of retaining wall.
通过对挡土墙计算理论、绘图的一般过程及常用断面形式的分析研究，开发了挡土墙CAD系统。
To some extent, the calculation, analysis and results are helpful to the brush seal design and engineering application. These can help the future research in theory and application of brush seals.
本文的计算和分析过程及其结果对于刷式密封的设计和工程应用有一定的指导意义，为进一步深入开展刷式密封的理论研究和提高应用水平奠定了良好的基础。
Based on the theory of Flexible multi-body dynamics, the model of deploy-able antenna is established, and the dynamic response and analysis calculation to large space deployable antenna is done.
基于柔性多体动力学理论，对可展开天线进行了系统建模和动力响应计算及分析。
Then the method to calculate the length of MDZ is proposed. This model can offer some references for theory analysis and numerical calculation.
讨论胶结力的性质与分布，给出微裂纹损伤区长度确定的方法，为理论分析与数值计算提供依据。
Using the line theorem and procession theory, based on the analysis of the capacity of the port, the passenger transportation cable car capacity calculation model is established.
运用线性理论和排队论的数学方法，在分析客运码头流量的情况下，建立了对应于客运码头不同流量的客运缆车容量计算模型，编制了缆车客运量的仿真程序。
With analysis of forces on particle and calculation of terminal velocities, terminal velocity models are selected, and then Pulse jamming settlement theory was discussed.
在颗粒受力分析及沉降末速计算基础上，首先选取了沉降速度模型，进而对脉动干扰沉降理论做了初步探讨。
With analysis of forces on particle and calculation of terminal velocities, terminal velocity models are selected, and then Pulse jamming settlement theory was discussed.
在颗粒受力分析及沉降末速计算基础上，首先选取了沉降速度模型，进而对脉动干扰沉降理论做了初步探讨。
应用推荐