The surface of the finished glass has the power to adsorb out of the resin mixture one or more constituent necessary for complete curing of the resin.
处理过的玻璃表面有从树脂混合物中吸附出一种或几种组分的能力，而这些组分对树脂完全固化是很必要的。
Hone not FINISHED: Defect on honed surface; finish ground surface not cleaned up adequately by the honing operation.
珩磨未完：珩磨表面的缺陷，磨加工过的表面通过珩磨工艺没有变得足够光洁。
The surface texture is finished with ornate grooves creating a dynamic rippling effect.
石凳中间是带有纹理的凹槽，创造了一种动态的水流效果。
The surface should be smooth, no foreign impurities and injury. The finished products should be polished after the cut into the appropriate size.
试样的表面应光滑，无外来杂质及损伤。成品应经打磨后裁制成相应尺寸。
The grinding processes of advanced ceramic material are studied by using indentation damage theory, and their influence on the finished surface and component properties is discussed.
采用压痕损伤理论研究和分析高性能陶瓷材料的磨削加工过程及其对加工表面和零件性能的影响。
The walls of the bathrooms are finished in waterproof resin which provide a singular surface that is both luminous and very easy to maintain.
浴室的墙面采用防水白树脂材料，使得墙面容易维护，并有发光的效果。
The surface degree of finish is important index of production quality, discussed surface roughness of hot strip, effect and control way of cold roll process on finished product.
不锈冷轧带钢表面光洁度是重要的产品质量指标，讨论了热轧带钢的表面粗糙度和冷轧工艺对成品表面光洁度的影响及控制方法。
The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.
研究分析了不同的切削速度及进给量对叶轮叶片加工的表面粗糙度的影响。
Drying time: in printing, the time required for an ink to form a rub-proof surface. Also, the time needed for drying before the opposite side of a sheet can be printed or finished.
干燥时间：印刷时，油墨形成一层耐磨擦的表面所需的时间，亦是印反面或作完成加工前所需的时间。
The surface reconstruct via bombardment of low energy plasma in order to enhance the adhesion between ITO coatings and substrate of PMMA is finished.
利用低能等离子体对有机玻璃表面进行改性以提高ITO膜的附着力。
This series door facing is made of high density wood fiber. The surface with oak wood grain and be finished white primer painting.
此系列模压门板基材为高密度模压门板，表面为橡木纹理，喷涂的白色水性底漆。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface X.
当量规套在成品灯(灯头向上)的灯头螺纹上时，灯头中心触点不应凸出量规的X面。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface "X".
当量规套在成品（灯头向上）的灯头螺纹上时，灯头中心触点不应凸出X面。
This series door facing is made of high density wood fiber. The surface is smooth and be finished white primer painting.
此系列模压门板基材为高密度模压门板，表面为光面，喷涂的白色水性底漆。
Various alclad, heating time, rolling pass, reduction is used in the test, and compared surface quality with rate of finished product after rolling.
本试验采用不同包铝方式，不同加热时间，不同轧制道次和道次压下量的安排进行研究。
It was developed by SEM that the surface of wool finished by hot-reacting PU is covered by resin, and there are bond points between fibres.
通过扫描电镜等实验手段研究发现，热反应型聚氨酯整理后的羊毛纤维表面被树脂覆盖，纤维之间存在粘接点。
The surface of the foundation concrete is finished off with trowel to serve as floors.
基础混凝土表面用泥刀刮平后就当成地面了。
Simple, make a process hole in the opposite direction of this inner surface, process with milling cutter. Fetch back the process hole after procession was finished.
简单，在该内表面的对面开加工孔，然后用铣刀加工。加工完之后，把加工孔补上。
A dive is finished when the whole body is completely under the surface of the water.
当运动员整个身体浸入水面以下，一个跳水动作才算完成。
There were remnants strain and stress in the finished surface and the remnants strain and stress decreased with the distance of tool tip and the finished surface increased.
在加工表面上存在着残余应力和残余应变，且残余应力和残余应变随着与刀尖和已加工表面之间距离的增大而减小。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X.
当量规套装成品灯(灯头向上)的灯头螺纹上时，灯头中心触点不凸出X面。
Probably the most common reason not to draft a surface is to make it fit with other parts of a finished product.
大概不需要拔模角度的最经常用到的理由就是我们需要让这个表面和其它产品配合。
Co. has developed the "Non-adhesion technology" too. There has been a big reduce in the adhesion of the fluororubber surface, and the rate of finished products has bee improved int...
同时旭化成工业公司还开发了非粘着化技术，大幅度地降低了氟橡胶表面的粘着性，提高模压成型时制品的成功率。
Now the reinforcement of the tomb pit slope is finished, the surface strength of rock slightly increases, and the case of rock fall decreases significantly.
目前墓坑边坡加固已经完成，岩石表层强度有所增加，而碎石崩塌现象明显减小。
Due to no adoption of a toluene solvent, the complex segregation between a finished product and the solvent is avoided, which is conducive to reducing the surface tension.
由于不采用甲苯溶剂，避免了终产物与溶剂的复杂分离，有利于降低表面张力。
Co. has developed the "Non-adhesion technology" too. There has been a big reduce in the adhesion of the fluororubber surface, and the rate of finished products has bee improved in the mou...
同时旭化成工业公司还开发了非粘着化技术，大幅度地降低了氟橡胶表面的粘着性，提高模压成型时制品的成功率。
The finished products produced by this machine has he feature of good surface, stronger compression resistance, light and heat stability, low size-changing and ageing resistance.
该机组具有能耗低、性能稳定、高速高效等特点。用该机组挤出的异型材外形美观、抗压性能强、光稳定性和热稳定性好、尺寸变化率低、抗老化。
In the invention, the correcting tool is skillfully applied, and the processing of the joint close surface of the odd-flap large-size stator engine base can be successfully finished once.
本发明巧妙地运用校正工装，可实现奇数瓣大型定子机座的合缝面加工一次成功。
In the invention, the correcting tool is skillfully applied, and the processing of the joint close surface of the odd-flap large-size stator engine base can be successfully finished once.
本发明巧妙地运用校正工装，可实现奇数瓣大型定子机座的合缝面加工一次成功。
应用推荐