• The jig installs in moves above the work table.

    夹具安装移动工作台之上

    youdao

  • It mainly completes the jig design bases on "three charts and a card".

    完成基础,完成夹具设计

    youdao

  • If the workpiece is of simple construction, the jig may be clamped on the workpiece.

    如果工件结构比较简单钻模夹持工件上。

    youdao

  • The hydrodynamic force function is the primary factor of affecting the jig sorting effect.

    动力作用影响汰分选效果主要因素

    youdao

  • In some designs the jig with the formwork is supported and lifted directly from the ground.

    一些设计夹具模板支持解除地面直接

    youdao

  • This method is so suitable to the jig process, which its theory got great behind the practice.

    一点对于这种理论严重落后于实践的系统尤为适用

    youdao

  • When the man on the roof saw that the police had surrounded the building, he knew that the jig was up.

    屋顶那个人警察已经包围楼房知道一切都完了。

    youdao

  • Provide improvement Suggestions for existing jig, and follow up and resolve using issues about the jig.

    现有工装夹具提出改善建议跟踪解决工装夹具在使用中的问题

    youdao

  • One reason is for storage and the main reason is because if the jig is left loose on one side, it rattles.

    原因之一存储主要的原因是因为如果剩下夹具松散摇铃

    youdao

  • Pull out the jig dowel posts, get your hand into the sound hole and carefully peel away the cardboard jig.

    夹具木钉职位进入小心剥离剥夺纸板夹具。

    youdao

  • The paper provided the jig control model base wide collection theory after the study of jig control process.

    分析研究控制过程基础上,提出了基于理论跳汰机控制模型

    youdao

  • The jig, working on the principle of magnetism, with a special configuration and sharp, is used for aging discrete SMDs.

    利用原理通过特殊结构形式,设计了一种分立式表面安装元器件夹具

    youdao

  • Design the jig and fixture during the product development process and help the operation to easy assembly and high efficiency.

    在新产品设计过场完成工装制具的设计,帮助生产实现容易组装提高效率。

    youdao

  • The jig includes a longitudinal indexing rod that precisely locates and supports by pivotal articulation, a plurality of swing arms.

    夹具包括纵向索引精确地定位关键吐字,摆动武器多元化支持。

    youdao

  • A workpiece resting on a flat surface will be definitely located by two holes which fit over two locating pins in the jig or fixture.

    基于一个平面的制件适合夹具装置的定位二个明确地位于

    youdao

  • In the second chapter, aiming at solving the rigid problem of the jig needle bar, an accuracy control method based on FEA was put forward.

    第二针对复杂宝石加工专用装备夹具刚性较问题,提出了基于有限元分析的夹具针杆挠度控制技术。

    youdao

  • I immediately started cutting out all the pieces for the bottom wing ribs. Glued them together then started making the jig for the top ribs.

    马上开始切割机翼木上零件,把他们粘合到一起然后马上用夹具把肋木压好。

    youdao

  • We would recommend doing this undercut as second operation as current design have problem to build a tool. And the jig cost will be occurred.

    此处倒出模困难建议先不倒勾,成型后二次加工,要做治具,费用要另外算。

    youdao

  • The scene operation part of the text platform contains the operation board, the outer covering, the measuring instrument as well as the jig part.

    现场操作部分操作面板外壳测试仪器以及夹具部分组成。

    youdao

  • Dr Dutrieux said that the discovery of the ridge was an important piece in the jig-saw of factors that could be changing the ice dynamics in the region.

    特·里奥博士发现拼合可能改变地区冰川动态各种因素中的一个重要部分。

    youdao

  • The force model of the jig needle bar in the process of grinding diamonds were analyzed, and the calculation formula of grinding force was established.

    分析了宝石磨削过程中的夹具受力模型,建立了基于因次解析法的夹具针杆磨削计算公式

    youdao

  • Therefore it is very magnificent for increasing the separation accuracy and productive capacity of the jig to improve discharging equipment of the jig .

    因此改进排料装置对于提高跳汰机分选精度处理能力非常重要意义。

    youdao

  • The structure, separation mechanism, commercial test and production of the jig with low magnetic field strength and autogenous heavy medium are described.

    介绍场强自重跳汰机结构分选原理工业试验生产情况。

    youdao

  • It must be remembered that the jigs, once made, will be used on many components, and the extra cost of an accurately made jig is spread over a large output.

    记住这种一旦好,用于许多零部件精确制造钻模额外成本分摊大量产品上。

    youdao

  • A, Whethe connecor is plugged into the jig, the locking would lock the connector immediately. The advantages areConvenient operation and high test effciency.

    胶盒插具后,治具上片即卡住插件。其优点操作方便测试效率

    youdao

  • It is shown that when the jig is designed on probabilistic theory, the requirement of accuracy for the jig can be reduced or accuracy of machining can be raised.

    结果表明夹具概率理论设计时,可以降低夹具精度要求提高加工精度。

    youdao

  • In the jig aspect, we use the "two sells at the same face" for the localization plan. Only this way, we can guarantee the hole the accurate localization and the size precision.

    夹具设计方面采用“一面定位方案保证加工孔的准确定位尺寸精度。

    youdao

  • This paper offers the probabilistic design for the jig of machine tools locating with one plane and two pins and presents calculating examples and makes computerized simulation.

    本文提供机床夹具一面定位概率设计法,给出了计算示例进行了计算机模拟。

    youdao

  • The results showed that the control model could handle the uncertain and uncompleted information during the jig operation and could provide a new study aceess to the intelligent

    结果表明能够处理过程中的不确定不完整的信息跳汰机的智能控制决策提供了一个新的研究途径

    youdao

  • The results showed that the control model could handle the uncertain and uncompleted information during the jig operation and could provide a new study aceess to the intelligent

    结果表明能够处理过程中的不确定不完整的信息跳汰机的智能控制决策提供了一个新的研究途径

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定