Combined with the fitting parameters obtained from the VG model, the effects of mineral composition and pore structure of the soil on SWCC are analyzed.
结合VG模型拟合的参数，着重分析了矿物成分和孔隙结构对膨胀土土水特征曲线的影响。
In this paper, the non-linear objective function is treated by means of the complete linearization method and the fitting parameters are restricted by using the punished function.
本文利用完全线性化方法处理非线性目标函数，用惩罚函数法对拟合参数约束。
A equation was used to fit the data of SWCC, and the relation between fitting parameters and dry density was studied.
通过水分特征曲线方程对试验数据的拟合，研究了拟合参数随干密度的变化情况。
To solve the problem of ellipse - object - shape parameters detection in noise image, a new detection algorithm using nonlinear data fitting model and cross-reference iterative method is proposed.
为提高噪声环境下椭圆类物体形状检测算法的稳定性与准确性，本文提出非线性数据拟合模型结合交叉参考迭代的新思路。
Also discussed are the fitting results, the effect of these parameters on cells efficiency and the ways for improving efficiency.
最后分析拟合结果，讨论了这些参数对电池效率的影响，提出提高效率的方法。
The tabulated data or surface fitting parameters of these patterns were used as characteristic vectors.
以谱图表列数据或曲面拟合参数为放电样本的特征量。
The parameters of glue damage development were obtained by the fitting curves of fatigue experiments.
通过胶层材料的疲劳性能实验曲线拟合得到损伤演化参数。
Objective: To provide endosteal parameters of the proximal humerus for designing of humeral prosthesis stem fitting Chinese.
目的：为设计适合国人的肱骨头假体柄提供相关髓腔参数。
The creep mechanical parameters of Jintan rock salt are obtained with fitting tests data into the model.
最后，根据盐岩三轴蠕变实验结果拟合得到了金坛盐岩的非线性蠕变力学参数。
On this basis, the mobility circle fitting method for identifying the complex modal parameters from frequency response data is discussed.
在此基础上，介绍了由频响数据识别复模态参数的导纳圆拟合法。
An advanced simulated annealing method is presented to estimate the global optimal parameters of fitting carves of target's dynamic distribution.
采用了改进的模拟退火技术对这种分布特性进行全局最优拟合曲线参数估计。
A compound digital filtering method and a line fitting method based on the least squares are presented, which are used in the measurement system of interface parameters of artillery.
本文提出了一种复合数字滤波方法及基于最小二乘原理的直线拟合方法，用于实现火炮接口参数检测系统的滤波和线性度拟合。
Finally, the parameters of constitutive equation are obtained by fitting test data, the theoretic results is proved well by comparison with the experimental results.
最后通过实验数据拟合得到本构方程中的参数，将理论结果和实验结果进行比较，结果显示，两者吻合性较好。
In this paper, judgements of markedness of fitting model parameters are studied and elevation abnormality models are built on the basis of the principle of data diagnoses.
从数据诊断原理出发，研究了对拟合模型参数作显著性数据判据，据此建立高程异常模型。
This paper points out that the linearized curve-fitting parameters are not unbiased estimations.
本文指出线性化后的曲线拟合参数不是无偏估计量。
The principle and method for fitting and estimation of constitutive equation model parameters are discussed.
分析了用曲线拟合估计粘弹性材料线性本构方程模型参数的原理和方法。
By fitting the experimental data, the cluster unit rheological parameters of different fly ash content concrete were determined.
并通过对试验数据进行拟合，确定不同粉煤灰掺量混凝土簇单元的流变参数。
Select the appropriate inverse modes and parameters, it can improve the inversion results of the fitting degree.
在适当的选择反演模式和反演参数后，能够提高反演结果的拟合程度；
At last, through establishing optimal fitting parameters, it is shaped the model of Ferguson bicubic curved surface to surface fitting.
通过弗格森双三次曲面为研究模型来建立最佳的拟合参数。
The fitting precision can be improved better when more parameters are used in the equation, but excess of fitting precision may make the equation untrue totally.
如果选择复杂的公式和过多的待定参数以追求过高的拟合精度，那么拟合公式将不能真实体现试验参数对试验结果的影响。
The fine structure parameters were calculated using a least-squares fitting procedure.
用最小二乘法拟合技术严格地计算了精细结构参数。
The peak parameters and trap parameters were estimated by fitting these curves using the TL general kinetic order equation.
用热释光一般级动力学方程拟合发光曲线，得到了峰参数和陷阱参数值。
Effective barrier parameters were obtained by fitting the theoretical curves based on the trapezoidal barrier potential model to the experimental ones.
采用梯形势垒模型计算伏安特性，并与实验伏安特性拟合，得到了结的有效势垒参数。
Consequently, with the use of curve fitting method, the inversion of all seismic lithologic parameters can be easy achieved, and zero-offset section can be obtained.
所以利用曲线拟合方法很容易实现全部地震岩性参数的反演，并可提取零偏移距剖面。
Some parameters can be obtained from the fitting results, such as adsorption equilibrium constants of additives.
由拟合结果可得到一些参数值，如吸附平衡常数等。
Based on the unified creep model and the relevant creep equations, the creep properties of rock under step load is studied, and the corresponding creep parameters by fitting curves are obtained.
根据统一蠕变模型和该模型导出的蠕变方程，研究了分级加载条件下的岩石蠕变特性，并且通过曲线拟合得出了相应的蠕变参数。
In order to make the spindle fitting of the hoist more rationally, the paper adopted ARS optimization, founded the mathematical models for the spindle of the hoist, optimized structural parameters.
为了使提升机主轴装置结构更加合理，采用了ARS算法，对主轴装置结构建立数学模型，并对结构参数进行了优化。
In order to make the spindle fitting of the hoist more rationally, the paper adopted ARS optimization, founded the mathematical models for the spindle of the hoist, optimized structural parameters.
为了使提升机主轴装置结构更加合理，采用了ARS算法，对主轴装置结构建立数学模型，并对结构参数进行了优化。
应用推荐