The research shows that the method is effective to improve the forecasting accuracy of the finite element model.
研究表明:采用上述方法可有效地提高有限元模型预测的准确性,为机床的进一步优化设计提供依据。
The mortise and tenon joint of the structure is replaced by a special beam-element group in the finite element model.
引入梁单元组模拟斗拱连接,从而建立了具有木塔较细致结构的有限元计算模型。
A theoretical study on ultrasonic guide waves generated by a pulsed laser was presented, using the finite element method (FEM).
利用有限元法(FEM)对板状金属材料中脉冲激光激发的超声导波进行了理论研究。
The results from test and calculation are in good agreement, which indicates that the finite element model established is correct.
有限元分析结果与试验结果吻合较好,验证了有限元模型的正确性。
A numerical model, based on the finite element method, is established to describe a fluid flow in a deforming saturated oil reservoir.
利用有限元方法,建立了一个描述可变形饱和储层中流体流动的数值模型。
It compares the rigid limit equilibrium method with the finite element method.
比较了有限元法和刚体极限平衡法的优缺点。
It was universal to study ship's longitudinal strength by using the finite element-method.
目前国内外普遍运用有限元方法研究船体的总纵强度。
The up-to-date research progress of the finite element analysis of soil cutting is reviewed.
阐述了用有限元法分析土壤切削问题的研究进展情况。
The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.
该研究使用ANSYS有限元软件的热分析模块进行变速箱热传导分析计算。
The coherence between the computing results with the finite element solution shows the method in the paper is reliable.
其结果与有限元精确解的一致性表明文中方法是可靠的。
To examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.
为了测斜仪技术检验监测结果的准确性,采用有限元分析方法计算静压桩与土的相互作用效果。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法,建立了横流式农用清选风机内部的气体流动数值模拟模型。
In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I DEAS.
本文应用有限元法在I - DEAS软件平台上对MWM395柴油机机体进行了模态分析。
The analyzed result coincides with the experimental result, so the finite element method can be used for the optimal design of rubber damp.
分析结果与试验结果能很好的吻合,因此有限元方法可以用来指导橡胶缓冲器的优化设计。
Essentially, the finite element method is a numerical technique for the variational problems, which is a general approach to physical problems.
有限元法实质上是变分问题的一种数值解法,是物理问题的通用计算方法。
It is analyzed for the influence of oil films on the reactions of Marine shaft system by establishing the finite element model of the oil films.
建立了滑动轴承油膜的有限元模型,分析了油膜对船舶轴系轴承反力的影响。
Using the 3-D homogenization method and the finite element technique, we evaluate the effective elastic constants of the 3-D honeycomb sandwich panel.
基于三维均匀化方法并结合有限元技术,计算三维蜂窝夹层板的等效弹性常数。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
Because of its adaptation to shape and high precision, the finite element method has a more and more important role in the analysis of optical waveguides.
作为一种重要的数值分析方法,有限元法凭借其对光波导任意形状的适应性、高的计算精度等特点,将在光波导分析中起到越来越重要的作用。
The result of equivalent section method was less than the results from the finite element program, which demonstrates the former was a conservative approach.
在极限承载力计算中,将有限元法和等效截面法进行了对比,发现等效截面法计算出的结果偏小,说明这是一种较为保守的方法。
A mathematical model for determining the thermal influence zone of buried hot oil pipeline was developed and solved numerically by the finite element method.
建立了埋地热油管道热力影响区的数学模型,并用有限元法进行了求解。
Conclusion: Cable and gap elements are reasonable boundary conditions of the finite element model of mandible, which will improve the similarity of the model.
结论:采用柔索约束、间隙元作为下颌骨及髁突的边界条件,可提高模型的相似性,为下颌骨的受力分析奠定基础。
For the plates with finite dimensions, the finite element method is used to obtain the stress distribution and stress concentration around the ovaloid opening.
对于有限尺寸板内开孔的情形,文中用有限单元法来分析腰圆形孔口的应力分布和应力集中。
Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.
运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型,设置接触属性来模拟二者之间的接触作用。
The main research of this paper is the dynamical characteristic and the finite element imitation of the full suspended whole set electronic belt weighing conveyor.
本论文以全悬浮整机式电子皮带秤的动力特性研究和有限元模拟为主要研究内容。
The effect of the initial geometrical imperfection on the buckling critical pressure and buckling model has been taken into account in the finite element simulation.
在有限元模拟中,分析了初始几何缺陷对壳体起皱的临界压力和起皱形态的影响。
The effect of the initial geometrical imperfection on the buckling critical pressure and buckling model has been taken into account in the finite element simulation.
在有限元模拟中,分析了初始几何缺陷对壳体起皱的临界压力和起皱形态的影响。
应用推荐