• Practical application showed that the die structure could meet the requirement for the products accuracy and greatly enhance the production efficiency.

    实践证明,模具结构能很好地满足产品压合后的精度要求,同时极大地提高了生产效率。

    youdao

  • Practice shows that the die structure is clear and reliable and can ensure the product quality. The design is an important reference to the kind of parts.

    实践证明:该模具结构可靠,能保证产品质量,对此类零件的级进模设计有重要参考价值。

    youdao

  • Practices show that the die structure is reliable and can ensure the product quality. It has important reference value to the design of the progressive dies for this kind of parts.

    实践证明,该模具结构可靠,能保证产品质量,对此类零件的级进模设计有重要参考价值。

    youdao

  • The paper presents the gauge block punching technique and the die structure.

    介绍了卡板的冲压工艺及模具结构。

    youdao

  • The indirect squeezing casting process and the die structure for the Mg alloy were investigated.

    研究了镁合金间接挤压铸造工艺及模具。

    youdao

  • And the importance of the die structure to the piercing precision and the die life was explained.

    说明了模具结构对冲裁精度及模具使用寿命的重要性。

    youdao

  • Practices show that the die structure is flexible and reliable and can ensure the product quality.

    实践证明:该模具结构灵活、可靠,并能保证产品质量。

    youdao

  • In this paper, the die structure is introduced in detail, and the methods of the relative issues are also pointed out.

    文中详细描述了模具结构,并提示了相关问题的解决办法。

    youdao

  • Practice proved that the die structure was reasonable and the manufactured parts were able to meet the needs of the use.

    实践证明:该模具结构合理,生产的制件可以满足使用要求。

    youdao

  • Piercing technology of the rear mudguard of motorcycle has been analysed and the die structure has been emphatically introduced.

    分析了摩托车后挡泥板的冲孔工艺,着重介绍了摩托车后挡泥板冲孔模的结构。

    youdao

  • The blank layout of the CAM part, the calculation of the fine blanking force and the design of the die structure were introduced.

    介绍了凸轮零件的排样、精冲压力计算及模具结构设计。

    youdao

  • The forming process of pressing for farm transporter frame is analysed, the die structure and its design process are introduced in detail.

    对车架冲压件的成形工艺进行了分析,并详细介绍了模具结构及其设计过程。

    youdao

  • The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.

    介绍了铝箔快餐盒拉伸模结构及压边的设计方案,此模结构较复杂。

    youdao

  • Proved by batch production, the die structure is rational, working efficiency is high, quality is good, and the economic profit is markedly.

    经批量生产验证,该模具结构合理、生产效率高、质量好、经济效益显著。

    youdao

  • The method has been proved efficient to improve forming property in some case. Furthermore, the die structure is simple and the products quality is fine.

    此方法经过生产实践证明可行,并且模具结构简单,工件质量好。

    youdao

  • The parts layout the calculation of the fine stamping force and the design of the die structure for the driven sprocket of the motorcycle were introduced...

    对摩托车从动链轮零件的排样、精冲压力计算及模具结构设计作了介绍。

    youdao

  • Practices show that the die structure is reliable and can ensure the product quality, and may be applied to the design of the progressive dies for the similar parts.

    实践证明,模具设计结构可靠,能保证产品质量,并能应用于同类产品的级进模设计。

    youdao

  • This paper studied the new method of deep drawing of cold rolling steel-metal part and the die structure. And it also proposed the strength calculation method of main die component.

    研究了冷轧薄钢板零件的深拉伸新方法和模具结构,提出了模具主要元件的强度计算方法。

    youdao

  • Taking the die structure of typical punching parts shaving die as an example, since restricted by the parts size itself, the intension and rigidness of concave die is seriously affected.

    以典型冲压件整修模的模具结构为例。因受零件自身尺寸的限制,极大影响了模具凹模的强度和刚度。

    youdao

  • Practices show that the die structure is reasonable and reliable, and can ensure the product quality. The design has reference value to the design of the progressive dies for similar parts.

    实践证明,模具结构合理、可靠,能保证产品质量,对此类零件的级进模设计有参考价值。

    youdao

  • The bending and pressing convex forming compound die for locking spring is designed, the die structure and pressing process are introduced, the product quality and production efficiency are improved.

    针对锁紧片零件,设计了折弯压凸复合模,并介绍了模具结构和工作过程。提高了产品质量以及生产效率。

    youdao

  • The bending and pressing convex forming compound die for locking spring is designed, the die structure and pressing process are introduced, the product quality and production efficiency are improved.

    针对锁紧片零件,设计了折弯压凸复合模,并介绍了模具结构和工作过程。

    youdao

  • The layout design and the automatic feeding system of the few-scrap progressive die for hexagonal parts were introduced. And the die structure and the design of the main parts of the die were stated.

    介绍了六角形工件少废料级进模设计中的排样设计、自动送料、模具结构及模具主要零部件设计等要点。

    youdao

  • The die structure was classified according to the relationship between the electrode and the billet.

    根据电极与锻件接触关系的不同,将电阻连续加热热锻模具结构进行了分类。

    youdao

  • The die structure of the high speed cold die forging for the differential bevel gear was introduced.

    介绍了差动伞齿轮高速冷模锻的模具结构。

    youdao

  • The die structure is rational and reliable and can guarantee product quality. It can greatly reduce production costs.

    该模具结构合理、可靠、保证了产品的质量,同时大大降低了生产成本。

    youdao

  • The die structure is compact, machining easy, working smoothly, operated conveniently and high production efficiency.

    该模具具有结构紧凑、加工制造容易、工作平稳、操作简便、生产效率高的特点。

    youdao

  • The die structure is proved in practice - Its running state is steady, and the quality of processed parts is reliable.

    该模具结构都经过实践的检验,模具运行状态平稳,生产的零件质量可靠。

    youdao

  • The die structure proved to be simple with better production quality and high productivity. The result is valuable for products of the same kind, even with the same process.

    该模具结构较为简单,加工质量好,生产率高,对同类产品乃至相同工艺的各种电子电器产品的加工具有参考价值。

    youdao

  • The die structure of progressive die of assembled panel is introduced. The strip layout and the design of main parts are also analyzed. Some reference data are also provided.

    介绍安装板进模的模具结构,重点介绍其排样图及主要零件的设计,同时提供一些经验数据。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定