For example, the events loop, multithreading, GUI design, etc.
例如，事件循环，多线程，GUI设计，等等。
Developers working on UI design should try to understand the OODA loop and use it in the initial design of the UI.
负责UI设计的开发人员应当尝试了解ooda循环，并将它用在UI的初始设计中。
The design of flyback switching transformer and feedback control loop and the improvement of the circuit for considering electromagnetic compatibility are the critical technologies.
反激式开关变压器和反馈控制回路设计，以及考虑电磁兼容性对电路的改进，是其关键技术。
This paper presents the design method of this type of nonlinear adaptive control system and its out loop trajectory tracking controller.
本文主要介绍这种非线性自适应控制系统及其外回路航迹跟踪控制器的设计问题。
This paper illustrates the emulation software architecture of the system based on DSP56F805. The design and implementation of the speed and current feedback loop are described in detail.
本文设计了基于DSP56F805，由速度和电流反馈控制回路构成的伺服系统实时仿真软件，并给出了其设计和编制过程。
The control laws of the inner closed loop system and post stall maneuver are obtained through using symbol operations design.
使用符号运算方法设计了系统闭环控制律和大攻角下的过失速控制律。
According to the singularity perturbation theory, dynamic inversion is adopted to design the basic attitude controller including fast inverse loop and slow inverse loop.
利用多重时间尺度奇异摄动理论，结合非线性动态逆方法设计了基本姿态控制器，包括快逆回路和慢逆回路两部分。
From the engineering point of view, a design method for single input optimal regulator with preassigned closed-loop pole by inverse problem approach has been derived.
给出了从逆问题指定闭环极点设计最优调节器的方法，试图从工程角度解决单输入线性定常系统最优调节器的极点配置问题。
The paper proposes an approach to design a dual-loop variable structure controller for a particular class of singularly perturbed dynamic systems.
针对一类典型的奇异摄动动力学系统提出了双回路变结构控制器的设计方法。
By relying on internal recirculation, the IR-CFB design eliminates J-valves, loop seals, and high-pressure blowers which are required with other CFB designs.
由于采用内部再循环，IR - CFB设计取消了其它CF B设计所需要的J阀门，环密封，和高压吹风机。
The design of code loop is the key point in the ranging system. And the choice of its parameter greatly affect the trace curve.
码跟踪环的设计是伪码测距系统的一个关键环节，其参数的选择对环路跟踪曲线影响很大。
The estimation of carrier frequency and design of loop parameters are analyzed in this thesis when the two characteristics are considered.
本文对这两个特征下载波同步的两个方面——载波频率参数估计与环路参数设计进行了分析。
This paper introduces the design thought of a wide band digital frequency synthesis loop. The principle circuit is given.
介绍了一种宽带数字式频率合成环路的设计思想，给出了原理电路。
The series control with the velocity loop and the position loop is an effective design method in the electro-optical tracking system which requires short respond time and little tracking error.
在光电实时跟踪系统中要求响应的时间短、跟踪误差小，采用速度环和位置环的串级控制是一种有效的设计方法。
Although the general design method of the position loop composed of the position sensor is abnegate, but the information radar servo system has high orientation precision in this way.
采用该方法，虽然舍弃了由位置传感器构成位置回路的常规设计方法，但情报雷达伺服系统仍然有较高的定位精度。
We put forward a technology named fixed instruction multiple data in order to accelerate the loop, and design a chip-multiprocessors architecture.
为加速循环程序执行，提出了固定指令多数据流计算模型，并设计了一个单芯片阵列处理器体系结构。
Proportional controller can be adopted concerning the fast response of inner loop. Thus the design of whole system is very simple.
考虑内环的快速性，外环可以采用简单的比例调节器，从而整个数字双环控制系统的设计非常简单。
The last part present the analysis of coupling effect and decoupling design on the torque rebalance loop.
最后部分讨论力矩再平衡回路中的耦合影响分析和去耦设计。
Base on the theory of suction performance of centrifugal pump and design of jetting pump, the design of jetting loop and jetting device are given.
结合射流泵的设计理论和离心泵的汽蚀理论，确定了引射装置的引射回路和环形均布喷嘴轴向斜引射的引射装置基本设计方案。
A passive loop filter scheme and the design method of the filter for current charge pump PLL frequency synthesizer chip are given in the paper.
针对电流型电荷泵PLL频率综合器芯片，提出一种称为极值相位裕量的无源环路滤波器方案和设计方法。
Another approach can also be compared, including the fabric of the contrast and color contrast to highlight the design of New Zealand loop.
另外也可以通过对比的手法，包括面料的对比和色彩的对比来突出纽襻的设计等。
The stabilizing loop is the base of the high-precision tracking and the design of stabilizing loop affects the whole tracking system's performance directly.
稳定回路是实现高精度跟踪的基础，稳定回路设计的好坏直接影响着整个光电跟瞄系统的跟踪性能。
The electronic design is similar to the one for crystal oscillator lock loop but the parameters are different.
腔自动调谐的电路设计和晶体振荡器伺服环路类似，仅仅环路参数不同。
The standard coefficient method is an effective, simple and intuitional way for the design of multi-loop control systems to reduce the calculation loads.
对于多回路控制系统，采用标准系数法，将使控制系统设计的工作量大为简化，且比较直观。
By adopting the new design of circuit loop with cross-multiplying terms, the precision of voltage and speed controlled will be enhanced in a wider speed range.
在电流环中引入了一组电流交叉乘积项计算出准确的轴电压控制值，实现控制系统在较宽的速度范围内满足较高的控制精度。
Fundamental principles of IFRSL and some problems in the loop design are described.
分析了中频积累法的基本原理以及环路设计中的若干问题。
This paper presents the principle and method of the geometry design of highspeed test loop integrated with the Test Field of MOC. for Highway and Traffic Engineering.
本文结合交通部公路交通工程综合试验场的实体工程，介绍了高速环道的几何设计技术。
This paper introduces its principle of design, the method of closed loop control, the main technology number and the use situation in the factory.
本文介绍了测控仪的设计原理，闭环控制方法，主要技术数据和它的现场使用情况。
The design succeeds in realizing open-loop control of step-motor.
设计成功实现了步进电机的开环控制。
By the matching design method, the dynamical equations of dosed loop system can match those of the open loop system.
方法采用匹配设计方法，通过匹配条件，使开环系统与闭环系统的动力学方程匹配。
应用推荐