Energy is a vital component of a technology-based society, and the growing need for electricity generation by the most efficient method will ensure a promising future for ceramic fuel cell technology.
能源对于以科技为基础的社会来说是不可或缺的组成部分，而且由于人们越来越需要用最经济的方法获得电能，因此陶瓷燃料电池的未来必定一片光明。
The filter quality of different foam ceramic filter can be compared by this method.
该方法可以有效的比较不同品种的泡沫陶瓷过滤片的过滤效果。
The porous hydroxyapatite-bioglass duplex ceramic was prepared by the dipping method with polymer foam.
采用有机泡沫浸渍法制备羟基磷灰石-生物玻璃多孔复相陶瓷。
Based on the equivalent elasticity method, the plane coupling vibration of a rectangular piezoelectric ceramic plate was studied and the resonant frequency equation was derived out.
利用等效弹性法分析了压电矩形共振器的二维耦合振动，导出了振子共振频率的解析表达式。
The carbon steel sample is coated with a uniform dense ceramic layer by chemical reaction method.
采用化学反应法，在普通碳素钢上涂覆一层均匀致密的陶瓷涂层。
This article advances a Structure method for the Stream working-based ceramic enterprise customer relationship management system by analyzing the characteristics of CRM and ceramic enterprise.
本文通过分析CRM的特征以及陶瓷企业特性，提出了一种基于工作流的陶瓷企业客户关系管理系统的构建方法。
The fabricating process of metallic ceramic coatings by thermochemical reaction method was studied. The phase structure and microstructure of the coatings were also investigated in this paper.
研究用热化学反应法在金属表面制备陶瓷涂层的工艺，并对涂层的相结构及显微组织进行分析。
The static and dynamic responses of piezoelectric ceramic actuators are introduced, and the measuring method and systems are also described.
介绍了压电陶瓷作动器的静、动态特性及其测量方法和实际测量系统。
Put forward a method of making modified ceramic powder, and analysed the performance of different nano modified ceramic coating which formed by flame spraying.
提出了火焰喷涂用纳米改性陶瓷粉末的制备方法，以及对不同纳米改性陶瓷火焰喷涂层的性能进行了分析。
Preparation of metallic ceramic coatings by thermochemical reaction method has the advantages of simple process, low cost, very strong adhesion of coatings to metal surface.
热化学反应法制备金属基陶瓷涂层具有工艺简单、成本低廉、涂层与金属表面结合力特强等优点。
This paper introduced a method of making ceramic film using the physical vacuum deposition and it also tested and analysed its physical feature, and got some useful conclusion.
本文应用真空物理淀积方法制备了铬酸锌湿敏陶瓷簿膜元件，并测量和分析了其物理特性，得出了一些有益的结论。
The experimental results were in accordance with the rank of machinability evaluation of ceramics. This method can be used in machinability evaluation of ceramic materials.
结果表明：对材料的可加工性评价排序结果与试验结果吻合，该方法可用于陶瓷材料可加工性的评价。
This article described the determination of hydrogen in steel, copper, niobium, tantalum and titanium with ceramic crucible by high frequency induction-thermal conductivity method.
介绍了采用陶瓷坩埚用高频加热-热导法测定钢铁、铜、铌、钽、钛中的氢。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
This paper introduced the working principles of ceramic tile die with static-pressure, structure type of upper punch and method of optimal design.
介绍了等静压瓷砖模具的工作原理、上模芯的结构形式和优化设计的方法。
Dielectric ceramic, method for manufacturing the dielectric ceramic, and monolithic ceramic capacitor.
介电陶瓷，制造该介电陶瓷的方法，以及单片陶瓷电容器。
Objective: To find the influence of inorganic ceramic membrane on the chemical components of Pinellia Heart-Sedating Granule, and establish a method for qualitative identification of the Granule.
前言：目的：探讨无机陶瓷膜精制工艺对半夏泻心汤成分的影响，并建立半夏泻心颗粒的定性鉴别方法。
In this paper, the content and method of research on pyrology of ceramic kilns were introduced. And some work on of research was reported.
本文介绍了陶瓷窑炉热工设计研究的内容，研究方法及前人所做的一些工作。
In this paper the thixotropy model of ceramic slip is established by the use of structure principle method and it is tested by experiments.
本文运用结构原理法建立了陶瓷泥浆的触变模型，并通过实验对所建立的模型进行了验证。
The method of improving the thermal shock resistance of ceramic tool materials i. e. using functionally gradient ceramic tool materials, is discussed and verified by intermittent turning tests.
讨论了提高陶瓷刀具材料抗热震性的方法即采用梯度功能陶瓷刀具材料，并结合断续车削试验进行了验证。
And then, the category of laser ceramic, laser active ion, laser spectrum characteristic and the method of making laser ceramic are introduced respectively.
接着分别介绍了激光陶瓷的种类、激光离子、光谱与激光特性和激光陶瓷的制备方法。
A quick method to assess the reliability of ceramic capacitors were also got through the combination of supersonic wave aided nondestructive test and destructive test.
采用了超声波无损探伤检测和破坏性试验相结合的试验方法，得到了一种鉴别陶瓷电容器可靠性的快速判别依据。
Based on this analysis, the design target of lapping attachment is determined and the new lapping method - conical lapping method of ceramic ball is proposed.
据此确定了研磨装置的设计指标，提出了新的陶瓷球研磨方法——锥形研磨法。
The ceramic lined composite pipes were produced by gravitational separation SHS method.
采用SHS铝热-重力分离法制备了陶瓷贻复合钢管。
With the improvement of the manufacturing and processing method of ceramic material and the theory of designing, part of ceramic automotive engine parts have already come into practise.
随着陶瓷材料制造和加工方法以及设计理论的改进，部分陶瓷汽车发动机零件已经进入实用阶段。
Based on the developed electrical regeneration method in former study, the electrical regeneration automatic control system of diesel wall flow ceramic particulate filter was discussed in this paper.
在前期对壁流式陶瓷微粒过滤器电加热分区再生方法进行完善的基础上，对自动控制系统进行了研究。
The preparation method of lead-free piezoelectric ceramic is the key factor to determine its structure, character and application.
无铅压电陶瓷的制备方法是决定其结构、性质和应用的关键因素。
This paper expatiated the components of ceramic slurry and its blending method under low temperature condition.
讨论了低温条件下陶瓷浆料的组分和配制方法。
The solubility of the ceramic pigment was measured with an X-ray diffraction method by analyzing the crystal constant accurately.
用X射线衍射分析的方法，通过精确测定点阵参数，对陶瓷颜料固溶体的固溶度进行了测定，并取得了满意的效果。
The properties and microstructure were observed and analyzed by the modern test method. Factors that influenced ceramic pore feature and volume density were discussed.
采用现代测试方法测定了样品理化性能，观察分析了样品的显微结构，并探讨了影响多孔陶瓷滤料孔特性和体积密度的诸因素。
应用推荐