The composite features, the elements diffusion and the binding strength in interface of the adaptor have been reviewed.
考察了接头的界面复合特征，界面上元素扩散及接头的结合强度。
Thee two situations offers are not the same effectiveness, In other words, the binding strength isdifference to the people.
对这两种情形的要约效力是不一样的，换言之，其对要约人的拘束力有强弱之别。 。
It was indicated that the behavior of the intermediate layer at sealing interface affects the binding strength considerably.
结果表明，封接界面上中间层的性状对于接合强度有很大影响。
The results indicated that:(1) compound acid cleaning was propitious to improve the binding strength of coating, uniformity of deposition and metal luster;
研究结果表明：1）采用复合酸洗，有利于提高镀层与基体的结合力、镀层的沉积均匀性和金属光泽度；
When sand blasting was used alone, the binding strength of the resin material obviously increased, while the strength of the stainless steel decreased obviously.
单独使用喷砂时，树脂材质托盘结合强度与空白组相比明显提高，而不锈钢托盘结合强度却下降明显；
The present invention can raise the binding strength between woven fiber net and concrete, and limit cracking in concrete for form fine, dense and homogeneous cracks.
本发明的效果和益处是改善纤维编织网和混凝土粘结的强度，对混凝土结构进行限裂，使裂缝更加细密均匀。
The experiment shows that the epoxy grouting material has binding strength more powerful and solidified time shorter, and can be especially used in the moist surface.
试验表明，环氧灌浆料具有较高的粘结强度，而且固化时间短，尤其能在潮湿界面中使用。
After study and analysis, the binding masonry structure is a kind of better structure system in economy and earthquake-resistant behavior with the notable seismic strength and the ductility.
经研究和分析，约束砌体的抗震强度有明显的提高，延性有显著的改善，它是一种既经济，抗震性能又好的结构形式。
Ordinary abrasive Bonded Abrasives by the binding agent to form a certain shape ordinary abrasive solid and has a certain strength abrasives.
普通磨料固结磨具是由结合剂将普通磨料固结成一定形状，并具有一定强度的磨具。
In testing, it is emphasized to test the working principle and strength action rate of horizontal ribs, and studies forced state of structure column and ribs and binding action for bonded structure.
试验中，重点考察了水平钢筋的工作机理和强度发挥率，研究了构造柱配筋的受力状态及对砌体的约束作用。
Compared with other conductive metal layer, copper coating with small with stress, high mechanical strength, the plastics substrate and coating binding force is good wait for a characteristic.
与其它导电金属层相比，镀铜层具有应力小、机械强度高、塑料基体与镀层结合力好等特点。
The results indicate that waterproof binding course influences shear strength and performance of waterproof significantly, and mix design gradation has no effect on shear strength.
试验结果表明：防水粘结层类型对层间抗剪强度影响显著，而试验采用的级配对层间抗剪强度影响很小。
The type of interfacial binding force was discussed in this paper, and formation process of bonding strength during wood gluing operation was also discussed.
简要概述了界面结合力的类型以及木材胶接操作过程中胶合强度的形成过程。
After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.
经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。
The carrier can participate in the hydration of the binding material in the porous concrete, so the strength and behaviour of this kind of porous concrete are improved with the age.
载体能参予多孔混凝土中的胶凝材料的水化过程，故该种多孔混凝土的强度和性能随着龄期增长而提高和改善。
The results of the test have shown that the operating technology for colloidal silicate binding is comparatively simple and the strength and gas permeability of the mold are comparatively good.
通过与硅酸乙酯水解液粘结剂的比较表明，以硅溶胶作为透气性金属陶瓷材料的粘结剂，其材料的制造工艺简单、强度较高、透气性较好。
In view of the high cost and low strength of the paste cement filling used at present in mines, it was proposed to use partial fly ash in stead of cement as the binding agent.
针对当前矿山膏体胶结充填成本高、强度低等现状，提出了以部分粉煤灰替代水泥作为胶凝剂。
It increases paper gloss, smoothness and strength by binding coating pigment particles to one another as well as to the base paper and by filling the voids between particles.
它增加纸张的光泽度，平滑度和涂层结合强度颜料粒子相互以及基本文件和填充粒子之间的空隙。
It is a dynamic tiered process, which is of practical activities, is not a simple binding factor, but binding nature combined with the move is a further stratification strength.
它对于一个动态的分层过程而言，内在于各种实践活动之中，不是简单的制约性因素，而是制约性与使动性因素的综合，是一种再分层力量。
In core making with cold core box, the solvent content in the binding material has a greater influence on the sand core strength.
采用冷芯盒法制芯时，粘结剂中的溶剂含量对砂芯强度有较大影响。
The basic way to decrease the pore number and improve the strength of the sinter with low fluorine is increasing the melting point and crystallization capacity of the binding phase.
因此提高低氟烧结矿粘结相的熔点及结晶能力是降低微气孔率、提高强度的根本途径。
The fully activated red mud then can turn into a hydraulic binding material that is no clinker and has specified strength.
可以将赤泥配制成无熟料的且具有一定强度的水硬性胶凝材料。
When the basicity increases, the fired pellet strength can be improved to 1200n because of the low-melting binding phase produced in the roasting stage.
考虑到当球团碱度提高时，生球在焙烧阶段易产生低熔点粘结相从而使单个球团强度达到1200n。
Develop the binding material which resist high shearing strength, low and high temperature is the key to solve the disease of asphalt overlay.
开发抗剪强度高、抗高低温性能好的粘接材料，是解决在沥青面层车辙、拥包、推移等病害的关键。
The main body and the covering piece of the electronic device shell are combined to form a whole structure and can have a higher binding strength.
本发明电子装置壳体的本体及覆盖件相结合形成一体结构，可具有较高的结合强度。
The binding straps for mechanical use feature super length and super slimness, light specific weight, low unit cost, good elasticity, flexibility and tensile strength and strong adhesion.
且机用打包带具有超长超薄、比重轻、单位成本低且弹性好、韧性强、拉力好、粘贴力强的特点。
The ground state binding energy is increasing function of the electron-phonon coupling strength, whereas the vibrational frequency is decreasing function of the aspect ratio of the ellipsoid.
基态结合能随电子-声子耦合强度的增加而增大。振动频率随椭球的纵横比的增加而减少。
AIM: to observe the effect of binding on the mechanical characteristics of bursting pressure and tensile strength after laser vascular anastomosis with binding.
目的：观察粘合剂对激光血管吻合的耐压强度与抗拉强度等力学特性的影响。
The main reason is the binding sites on the humic acid and metal ions' competition for them. However, along with ionic strength increasing, the complexation capacity was decreased.
溶液中铜离子浓度及腐殖酸浓度的增加会使络合率呈现上升的趋势，这主要与腐殖酸溶液提供的络合点位及金属离子对络合点位的竞争有关。
The main reason is the binding sites on the humic acid and metal ions' competition for them. However, along with ionic strength increasing, the complexation capacity was decreased.
溶液中铜离子浓度及腐殖酸浓度的增加会使络合率呈现上升的趋势，这主要与腐殖酸溶液提供的络合点位及金属离子对络合点位的竞争有关。
应用推荐