World IPv6 Day has achieved its purpose: drawing attention to the need of IPv6, especially now that IPv4 addresses have run out, and testing IPv6 at the Internet level.
世界IPv6日已经达到了它的目的：引起人们对IPv6需求的重视，尤其是现在IPv4地址已经分配殆尽，IPv6的测试工作已经提升到了互联网的级别。
Server performance analysis involves testing how different factors affect the performance of a server and drawing conclusions about the results.
服务器性能分析包括测试影响服务器性能的不同因素，并根据结果得出结论。
In charge of the drawing of the specialty's testing card and related technical documents.
负责本专业的检测工艺卡及相关技术文件的编制；
Proficient drawing and testing for crane parts.
精通图纸和起重机安装和测试程序。
EQUIPMENT REQUIRED: Valve must be installed per drawing and one (1) flexible hose with adapters furnished for testing.
设备要求：阀门必须按图示安装，必须配置一条带适配器的柔性软管用于检测。
Based on the vibration model and testing data, the paper provides a systematic way to not only the choice of testing parameter but also drawing the conclusion.
通过建立大型回转轴承装置的振动模型，以大量的试验数据为依据，提出了一套从试验条件与参数的选取到最后分析结论判定的系统方法。
Design and development of the mechanical systems, compose schematic diagram; assembly drawing and part drawing; testing on production etc.
产品机械设备的设计开发，包括完成产品原理图、装配图、零件图的设计、产品零部件选型和测试等；
The conventional method of testing the shed drawing deformation of travellers is of poor precision and difficult operation.
目前纺纱用钢丝圈开口拉伸变形率的测量采用人工方法，精度低，操作困难。
Stated the design method of drawing die for the lock catch of outside install door lock, introduced the drawing technology and problems appearing in die testing and solution.
叙述了外装式门锁锁扣拉伸模的设计，着重介绍了拉伸工艺及试模中出现的问题和解决方案。
By the simulating analysis to CAE drawing software, adding draw bead restraining mold is applied on the area of deficient stretching, the eligible products are produced finally by die testing.
经过CAE拉伸软件的模拟分析，对于拉伸不足的区域采用增加拉伸筋的方式，通过试模最终加工出合格的零件。
I am responsible for working out parts drawing and assembly drawing as well as tracing mold testing. I have taken part in the whole company's system establishment course.
零部件图及组立图的做成，试模的跟进，全程参与了公司体系的建立等等。
The Company has introduced home advanced wire drawing equipment, enamelling equipment and whole set enamelled wire testing equipment with annual output of various enamelled wire over 3000 tons.
公司引进了具有国内先进水平的拉丝设备、漆包设备和成套的漆包线检测设备，年生产各种类型漆包线3000吨以上。
Automatic software testing tools are drawing more and more attention as they have become a key technical approach to ensure software quality and reliability.
自动化测试工具作为保证软件质量和可靠性的关键技术手段正日益受到广泛的重视。
Through simulated analysis of CAE simulation software, It applies drawing ribs to insufficiently drawing area. It produces qualified parts through testing die.
经过CAE拉深软件的模拟分析，对于拉深不足的区域采用增加拉深筋的方式，通过试模最终加工出合格的零件。
Forging any testing data, or issuing any false testing report or drawing any fraudulent authentication conclusion.
伪造检测数据，出具虚假检测报告或者鉴定结论的。
Two parts whose drawing coefficient are 0. 39 passed through testing to production. It proved that taper female die is used up in deep drawing.
拉深系数为0.39的两种零件，从试制到生产，证明了锥形凹模是可以实现深拉深的模具。
Drawing and showing the real-time and dynamic data curve is an important function of the industrial testing and controlling system, and various realizing methods are different.
实时动态数据曲线的绘制与显示，是各种工业测控系统的重要功能。而实现方法也不尽相同。
Try drawing a schematic of the system you will be testing, showing what software will sit on which piece of hardware and how these connect to other applications.
你可以把你将要测试的系统用图解的形式表示出来，用来表现哪个软件将会依赖哪部分硬件以及如何与其他应用建立连接。
By providing fast output and parts with a smooth, easy-to-handling surface, C-UV6641 can finishing your project from drawing to testing parts in the shortest time.
可以提供更快的成型速度，适合更快速的部件处理方式，表面更容易处理，所以可以帮助您更快的完成项目的设计和测试等流程。
In this paper, the application of auto-testing and control system of the drawing-testing machine is described based on design idea of modern technology.
文章在现代技术设计理念的基础上，介绍了拉力机自动测控系统的技术实现。
The relationship of deep-drawing property and rolling parameters of IF steel was researched by the testing of ferritic rolling and annealing.
在统计分析退火温度对冷轧IF钢深冲性能的影响的基础上，对不同退火温度下的断面金相组织亦进行了分析，并与进口料进行了对比。
This method can provide a basis for evaluating potential of testing production section, exploring reserve, conducting fine evaluation and drawing up dev...
该方法可为评价试采井区产能、探明试采区块储量、进行油藏精细评价和编制开发产能方案提供准确依据。
The relationship of deep-drawing property and rolling parameters of IF steel was researched by the testing of ferritic rolling and annealing.
结果表明，较低的铁素体轧制温度和较高的铁素体区压下量时，IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。
DCAC made contracts with MATRICI company (Spain) and Baoma company (Chengdu, China) respectively on dies making and the drawing testing die for the trunk cover.
可想而知，背门外板的冲压成形工艺性极差。DCAC分别和西班牙公司和模具制造中心对背门外板分别就模具制造及试制模签订合同。
DCAC made contracts with MATRICI company (Spain) and Baoma company (Chengdu, China) respectively on dies making and the drawing testing die for the trunk cover.
可想而知，背门外板的冲压成形工艺性极差。DCAC分别和西班牙公司和模具制造中心对背门外板分别就模具制造及试制模签订合同。
应用推荐