• Completing preproduction testing and moving the application to the production servers doesn't signal an end to testing.

    完成生产前测试并将应用程序转移到生产服务器并不表示测试的结束。

    youdao

  • Introduced the application of low optical power receiver to HFC network. Signal testing and economical benefit analyzing were presented at the same time.

    介绍低光功率接收机在有线电视HF C网络中的应用,并对信号指标进行测试和比较,对经济效益进行分析。

    youdao

  • Testing mechanism of the sensor is researched and the relation between test signal and tension is deduced.

    文中研究了索张力传感器的测试机理,导出了传感器测力信号与索张力的关系。

    youdao

  • The function of testing transient signal of RTSA can provide display performance insight and analysis capability that can't be provided by other analyzer.

    RTSA的瞬时信号测试功能可以提供其他分析仪上无法提供的显示性能洞察力和分析能力。

    youdao

  • The paper introduced a design of CMOS amplifier that is used in small signal testing.

    本文介绍了一个基于低频小信号检测应用的CMOS放大器的设计。

    youdao

  • A general vibration signal testing and analyzing system for rotating machine is developed based on the methods.

    在此基础上研制一套通用性旋转机械振动信号测试与分析系统。

    youdao

  • The sonar buoy testing system can emulate signal of underwater sound and detect the operating status and performance of sonar buoy.

    声呐浮标测试系统能够模拟水下声信号,用以检测声呐浮标的工作状态和性能。

    youdao

  • Switch system is the center of automatic testing platform, by which signal can be switched to the port of UUT and the apparatus.

    开关系统是整个自动测试平台的中心,能够将各类信号自动切换到被测对象的输入端口和相应的测试仪器。

    youdao

  • While in loopback mode, driver outputs are internally connected to receiver inputs creating an internal signal path convenient for diagnostic testing.

    在回送模式中,驱动器输出在内部与接收器输入相连,建立一个内部信号通路以方便诊断测试。

    youdao

  • A new method of built in self testing for pulse doppler radar digital signal processor was advanced.

    提出了一种脉冲多普勒雷达数字信号处理机机内测试方法。

    youdao

  • The testing and assessment platform for railway section signal system is designed to test and assess the reliability and safety of train control and protection system in railway sections.

    铁路区间信号系统测试评估平台是对铁路区间列车运行安全控制和防护系统进行可靠性、安全性测试及评估的平台。

    youdao

  • The design, analysis and testing of the welding current signal detecting circuit for spot welding machine are discussed in this paper.

    本文主要论述点焊机焊接电流信号检测电路的设计、分析和测试。

    youdao

  • Chapter 5 particularly introduces basic principle of the circuit of the burst mode signal generator used for the testing of the burst mode optical transmitter and receiver module.

    第5章详细介绍了为实现对突发式光收发模块的测试而设计的突发信号模拟产生器的基本原理与各部分功能电路的实现。

    youdao

  • The spot testing and analysis by synthesis is adopted to analyze and process the test signal.

    采用现场测试与综合分析法,对测试信号进行了分析和处理。

    youdao

  • The result of testing shows that the system can carry out collection and stimulating of neural signal.

    测试结果表明此套系统可以实现神经信号的采集和刺激。

    youdao

  • There are varying noises in output signal obtained from magnetic flux leakage (MFL) nondestructive testing of oil pipeline.

    在采用漏磁法对输油管道进行无损检测过程中,信号会受到各种噪声的干扰。

    youdao

  • Modern signal processing and pattern recognition have been playing an increasing important role in ultrasonic nondestructive testing and evaluation.

    现代信号处理与模式识别技术在超声无损检测与评价中的作用愈来愈重要。

    youdao

  • In this paper, the signal of launching circuit and the testing theory are analyzed, and both software and hardware of the testing system are designed.

    文中对发射回路信号及检测原理进行了分析,对测试系统的软硬件进行了设计。

    youdao

  • Please note that the action of speed signal devices will cause the action of other devices. Consider the result before testing in order to avoid bad results.

    请注意,转速信号装置的接点动作会引起电站其他设备的动作,试验前应考虑这些动作的后果,以避免产生不希望的结果。

    youdao

  • RT100 is a portable three-frequency signal generator that can be used for a wide variety of testing and troubleshooting applications.

    RT100是一种便携式的三频信号发生器,可用于各种测试和故障排除应用中。

    youdao

  • The special functions of cepstrum in testing cycle signal and side-band identification were fully proved by application.

    实践证明了,倒频谱在检测周期信号和识别边频上具有独特的功能。

    youdao

  • Normalization method of ultrasonic testing signal, the advantages and disadvantages of time domain, frequency domain were discussed.

    探讨了超声波检测信号归一化处理的方法,以及时域信号归一化和频域信号归一化的优缺点。

    youdao

  • Signal processing methods used in ultrasonic testing are reviewed, which cover noise suppressing, QNDE and optimization of driving signal.

    文章综合报道了信号处理在超声检测的抑噪、缺陷的定性定量分析及优化驱动信号的几方面应用。

    youdao

  • Testing signal is very sensitive to the lift off effect in the hardness nondestructive testing of rail surface by electromagnetic method, so lift off effect must be restrained.

    电磁无损检测钢轨踏面硬度中,检测信号对提离效应极其敏感,所以必须对提离效应加以抑制。

    youdao

  • Based on the groove testing system, we induced the spectral analysis which is the signal analysis tool into evaluating the grooves, and used it as an evaluating standard.

    在槽型优选测试系统实验的基础上,我们引入了信号分析工具——功率谱分析,作为评估槽型优劣的一个标准。

    youdao

  • This paper introduces the software and hardware structure, display of digital course and the testing method of compass parameter of gyrocompass course signal digital processing system.

    文章介绍了陀螺罗经航向信号数字化处理系统的软、硬件结构,数字航向的显示,罗经性能参数的测试方法。

    youdao

  • Firstly, this paper analyzes the current analog signal random testing technology, and describes using entropy measure is more accurate and scientific to estimate the randomicity of signal by contrast.

    本文首先分析了当前模拟信号随机性测试技术,通过比较,说明使用熵测度对信号的随机性进行评价更加准确与科学。

    youdao

  • On the basis of digital signal process and nondestructive testing, the effect of welding process on the frequency spectrum of the current signal in AC spot welding is analyzed.

    在数字信号处理及无损检测的理论基础上,分析了焊接过程对电流信号频谱的影响。

    youdao

  • The method uses wavelet transform and principle component analysis to preprocess fault signal, afterward training and testing wavelet neural network with the preprocessed fault characteristic data.

    该方法首先利用小波变换和主成分分析对故障信号进行预处理,然后用处理后的故障特征数据对小波神经网络进行训练和测试。

    youdao

  • The method uses wavelet transform and principle component analysis to preprocess fault signal, afterward training and testing wavelet neural network with the preprocessed fault characteristic data.

    该方法首先利用小波变换和主成分分析对故障信号进行预处理,然后用处理后的故障特征数据对小波神经网络进行训练和测试。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定