Using the test signal method, a detailed analysis of subsynchronous oscillation for a HVDC system is performed.
对一个仅含有直流输电线路的系统，采用复转矩系数——测试信号法，对其次同步振荡特性进行了分析。
By using test signal method, the sub-synchronous electrical damping characteristics of a generator and the impacts of the designed SEDC on the generators electrical damping are analyzed.
采用测试信号法，通过计算发电机组的次同步电气阻尼特性，分析所设计的SEDC对发电机组次同步振荡的抑制效果。
A new test signal method based approach to design power oscillation damping (POD) controller for TCSC is proposed, by which the bulky eigenvalue calculation of state matrix can be avoided.
提出了一种基于测试信号法的TCSC功率振荡阻尼(POD)控制器的设计方法，避免了计算量庞大的状态矩阵特征值计算。
The preceding method is uses the signal in the frequency range energy distribution trick recognition goal, the actual test obtains approximately 83% average recognition rate.
前一种方法是利用信号在频域的能量分布特征识别目标，实际测试取得约83%的平均识别率。
The amalgamation of SRS technique and real-time signal analysis technique gives birth to advanced shock test real-time control system and this system replaces quickly the common method and technique.
冲击响应谱分析技术与实时信号分析技术的融合，先进的冲击试验实时控制系统技术也随之产生并迅速取代普通冲击试验分析方法与试验技术。
We should choose the suitable sweep signal and good test method to improve the precision and accuracy of frequency.
为提高扫描过程中频率的精度和准确度需要选择合适的扫描信号和检测方法。
The traditional signal detection theory and method using likelihood ratio test has been used widely, but it has obvious drawbacks.
传统信号检测理论和方法主要采用似然比检测，已得到广泛的应用，但是存在明显的缺点。
This paper concerns mainly: 1. From the principle of accelerated reliability test, a practical ageing method of signal lamp bulbs for basic unit use is proposed.
本文主要涉及以下三方面问题：1。从可靠性加速试验原理出发提出一种可供现场实用的信号灯泡老炼方法。
The programmable designing technique illustrated in this paper can be chosen as a preferred new method of television test signal generator in the near future.
这种可编程控制的设计技巧今后能够被用来作为电视测试信号发生器的首选新方法。
Composition of the cruising system on HONDA CR-V, input signal test method of its cruising control unit, as well as test and maintenance methods of its components are introduced here.
介绍本田CR - V型汽车巡航系统的组成，巡航控制单元输入信号检测方法以及巡航系统部件的检查与维修方法。
Viewable test pattern signal provides an intuitionistic and convenient evaluating method, therefore, HDTV test pattern signal generating system become a hot research of world today.
可视化的测试图案信号提供了直观、快捷的评测方法，因此，高清晰度电视测试图案信号发生系统成为当今世界的热门研究课题。
In this method, exert a plurality of first test signals to the test wires, to check whether the first signal defect is produced.
在所述方法中，向所述测试线施加多个第一测试信号，以检查是否产生了第一信号缺陷。
The test method and debug method of signal receiving in the interference section are discussed.
并讨论在相干区内的信号接收性能的测试及调试方法。
The system uses ultrasonic wave as signal source, with the multi-probe multi-directions sweep, and fluid soak method test the gear.
系统以超声波作为检测信号源，采用多探头多方位扫描、液浸法的方式对齿轮进行检测。
Conclusion the simulated SEMG signal based on this method has key characters similar to those of the real SEMG, and it can be used to test the decomposition algorithms.
结论该方法模拟出的SEMG信号更能逼近真实表面肌电信号的特征，可用于验证SEMG分解算法。
At the same time, we need to collect the actual signal of mining ship under the complex sea status as the simulate signal to test the robust and self-adaptive ability of the control method.
同时，需要采集采矿船的在复杂海况下的实测信号作为模拟海况信号验证控制算法的鲁棒性和自适应能力。
The automatic testing method of cable fault is characterized by that the pulse signal transmitted and received by pulse reflection test circuit can be directly superposed on the output end of d.
电缆故障的自动测试方法，其特征在于是将脉冲反射测试电路发射与接收的脉冲信号直接叠加到直流高压测量电路的输出端，直流高压测量电路的输出端与被测电缆端口连接。
Fault diagnosis and test methods can be divided into the method based on mathematical model, the method based on signal processing and the method based on knowledge.
故障诊断与检测的方法可以分为基于数学模型的方法、基于信号处理的方法和基于知识的方法。
The on-board measurement device and its monitor system were designed, Then the signal processing method induced from the engine test data was adopted to analyze the test results on the truck.
首先设计了适于随车测量的瞬时转速采集装置及其随车监控系统；然后根据在台架试验结果总结出的处理方法，对实车不同工况下的瞬时转速信号测量结果进行了分析。
The test shows that the compression method has higher compression ratio and faster speed, and keeps invariable characteristic of signal and image.
实验证明该方法压缩比高、速度快，压缩后能保持信号与图像的特征不变。
CXA N9000A signal analyzer is a member of the X series of test instruments, which is the comprehensive use of the instrument, measurement and software for signal analysis of the evolution method.
N9000A CXA信号分析仪是x系列测试仪器中的一员，它是综合利用仪器、测量和软件进行信号分析的演进方法。
Last, the test data sent out by signal generator comes into the system, plots the waveform from export data after the function is achieved, and gives validation analysis to the design method.
最后由信号源发出测试数据进入系统，进行功能实现后输出数据绘制出波形图，对所设计的基带系统驱动方案进行验证分析。
Firstly, this paper presents mathematical model of digital signal, . Secondly, it details principle and method dragging mouse to generate test signals and data files.
本文讨论了数字信号模型，详细阐述了拖拽鼠标生成测试波形和数据文件的原理和步骤，给出了画“波形”子程序实例。
How to test the analogue and mixed-signal circuits has become very critical to the IC testing, a novel fault diagnosis method based on current testing is proposed for mixed-signal circuits.
针对集成电路测试中模拟和混合电路的测试问题，提出了一种基于小波分析的电流测试实现混合信号电路故障诊断的方法。
This paper presents a "waveform display method" for checking the colour TV Chrominance Delay Line in the factory, and introduces a simple, practical and self-made test-signal generator.
本文提出一种适用于工厂检测彩色电视色度延迟线的“波形方法”，并介绍了一种自制的简易实用的测试信号源。
It studies problems appeared in the test, such as signal filter, sensors' checkout, control method, and high-speed data collection.
对试验中遇到的信号滤波、传感器标定、控制方式、快速数据采集等问题作了研究。
And a new compensation method of the synthesis error of on line measurement of the image sensor signal is given by proof test and theoretic analysis of the major factors which resulted in the errors.
通过对误差因素的实验验证和理论分析，给出一种适用的图像信号的综合误差补偿方法。
A method of signal mutative symptom extraction is presented, in which the theory of wavelet transform is applied. Moreover, this method is used in fault diagnosis of test turntables.
应用小波变换理论提出了一种信号突变征兆提取方法，并将它应用于转台故障诊断中。
A method of signal mutative symptom extraction is presented, in which the theory of wavelet transform is applied. Moreover, this method is used in fault diagnosis of test turntables.
应用小波变换理论提出了一种信号突变征兆提取方法，并将它应用于转台故障诊断中。
应用推荐