The paper introduces the present research carboxymethyl starch synthesis principle and method, and the substitution degree of carboxymethyl starch test methods were introduced in detail.
本文介绍了羧甲基淀粉的研究现状，合成原理和方法，并对羧甲基淀粉取代度测试的方法进行了详细的介绍。
This Paper introduces the method of staining on dissolving tungsten ore test and its theoretical principle.
本文介绍了商品性钨矿样品的溶矿、染色试验方法和理论原理。
In the demonstration research, base on the PLS - structure equation principle, used the recursion iteration method to carry on the exhaustive fitting analysis and the statistical test using the model.
在实证研究中，以PLS—结构方程原理为支撑，采用递归迭代方法对应用模型进行了详尽的拟合分析与统计检验。
Combining the principle of commutation fault with real test phenomena, the reasons of the whole incident are analyzed, and the method to deal with this accident is described and explained.
通过将换相失败的原理与实际的试验现象相结合，分析了整个事故原因，并对事故解决方法进行了描述和解释。
It introduces the principle, equipment and method of deep plate loading test by self-balance method, and compares it with the traditional loading test of single pile.
介绍自平衡法深层平板载荷试验原理、试验设备及试验方法，并将其与传统单桩静荷载试验进行效益对比分析。
This article has described the structure, operation principle and test method of salt spray cabinet, and discussed various factors that influence the cycle corrosion test.
介绍了盐雾试验箱的构造，工作原理和试验方法，并探讨了涂层在循环腐蚀试验中的诸多影响因素。
Study the test principle and method of automobile headlamp near shine azimuth with pairs of location screen boards.
研究了汽车前照灯近光照射方位角双位屏幕板检测原理及方法。
This paper introduces the structure principle and making method for a kind of assembly test circuit.
介绍了一种测试工装电路的结构原理及制作方法。
The valve leakage automatic inspection device was introduced, including its structure, the principle and test method.
介绍了阀门泄漏量自动检测装置的结构、工作原理及测试方法。
Based on the principle of combination of coarse and fine axis Angle, this paper presented an engineering practical accuracy test method of multi_pole resolver to digital conversion system.
基于多极旋转变压器轴角粗、精组合的原理，提出了一种工程实用的多极旋转变压器轴角—数字转换系统精度的测试方法。
This paper illustrates the structure and principle of double seals, analyzes the problems found in water filled test, and brings forward the improvement method.
文章介绍了双重密封的结构和原理，通过充水试验检验双重密封的各项性能，对出现的问题进行了分析，并提出了改进方法。
The calibration principle and method of the near region field strength meter are described, especially its auto calibration and test system and the study of software.
介绍了近区场强仪的核准原理和方法，着重介绍了近区场强议的自动校准测试系统和软件的研究。
This paper introduces the test principle and method of dual-wavelength spectrophotometry, and analyses the test result.
介绍双波长分光光度法测试的原理和方法，对测试结果进行了分析、验证。
The construction, main technical characteristics, working principle and test method of the soft rock expansive power determinator are systematically introduced in this paper.
本文介绍了软岩膨胀力测定仪的构造、主要技术特征、工作原理和测试方法。
In this paper, the design principle, structure features and the accuracy analysis method of a test system with accuracy of 0.5% for solid rocket engines are introduced.
本文论述了固体火箭发动机0.5%高精度测试系统的设计原则、结构特点和精度分析方法。
Several important aspects such as system configuration, test principle, calculation method, software procedure and element selection, etc. are analyzed and discussed.
对系统配置、测试原理、计算方法、软件流程、元件选择等重要问题进行了分析与讨论。
This paper introduces the principle, method and result analysis of performance test of brake used in shock testing system, and presents the estimation method of brake rigidity and specimen stroke.
介绍了冲击试验中制动器性能试验的原理、方法及结果分析，给出了制动器刚度及试件滑动行程等参数的估计方法。
The paper briefly introduced the basic principle of the method, its general flow, key parameters test effects and key technical links controlling quality of process.
本文简要地介绍了这一方法的基本原理，一般流程，关键参数，实验效果以及对过程的质量控制等关键的技术环节。
The principle and test method of using adsorptive stripping voltammetry to determine the mass concentration of trace iron in boiler water of thermal power generating units are described in this paper.
介绍了用吸附溶出伏安法测定火力发电机组锅炉用水中微量铁质量浓度的原理和试验方法，并对多组试验数据进行了分析和讨论，从而得出测试参数的最佳选取值。
The rheological theory is introduced systematically in this paper, and the principle and method of soft clay in indoor rheological test are also introduced.
本文比较系统的阐述了土体的流变理论，介绍了软粘土的室内流变试验的原理和方法。
This paper introduces a kind of new method of cool rolling, shock and rolling, for making rounds of high strength bolts. Its working principle and test results are described.
介绍了一种用于高强度螺栓圆角冷滚压的新方法——冲击滚压，简述了它的工作原理及试验结果分析。
Emphasized to introduce the test method of the medical science principle and human body equilibrium ability for recover from illness.
着重介绍了康复的医学原理和人体平衡能力的测试方法。
The principle and structure of bar graphic type pressure meter are described. Especially, the drive circuit and test method are described.
本文介绍光柱式压力表的原理和结构，专门叙述了驱动电路和调试方法。
This paper introduces the software design principle, method and property of the database system for high altitude physiology test.
介绍了高空生理实验数据库系统软件设计原理、方法及特点。
A new on site verifying method for power transformer is proposed. The basic principle, verifying circuit and configuration of the test equipment are given as well.
提出了一种电力互感器现场校验的新方法，介绍了其基本原理、校验电路及其装置结构组成。
The method and principle of autonomous location is presented about a pipeline inspection robot, the results of test and location accuracy meet the requirements of inspection technique.
介绍了一种管内探伤机器人自主定位的方法原理，经检验，其定位精度和效果满足了检测工艺的要求。
The primary principle is developed in detail and the rightness of the new method is proved out by the simulant test and the applied real example.
文中详细介绍了这种方法的基本原理，并用模拟实验和应用实例对其正确性作了充分验证。
Introduced the principle and constructive design of a stop method of self generating sets, By test and verify, its performance is stability and reliability.
介绍自发电机组中的一种停机方式的原理及结构设计。经试验验证，该停机方式性能稳定、工作可靠。
Fundamental principle, test mathematical module and implementation method are discussed based on nestification weigh testing system by using computer test and control technology.
论述了计算机测控技术研制成功的叠加式称重测试系统的基本原理、测量数学模型和其实现方法。
Fundamental principle, test mathematical module and implementation method are discussed based on nestification weigh testing system by using computer test and control technology.
论述了计算机测控技术研制成功的叠加式称重测试系统的基本原理、测量数学模型和其实现方法。
应用推荐