The 10 test frame quartz tube, quartz tube, quartz rod, piston top.
测试架石英管，以及石英外管，石英活塞顶杆。
Now in the test frame, click on the test connection button to test the JDBC connection with the DB2 database.
现在，在Test框架中，单击TestConnection按钮来测试与DB 2数据库的JDBC连接。
Finally the article puts forward software test frame with practical significance from engineering point of view, and gives a mathematical proof for.
最后从工程角度提出了有现实意义的软件测试框架，并从数学上证明了该框架的有效性。
The test frame is measured by accelerometers, laser displacement sensors and force sensors. The time history curves are drawn to analyze the isolation effects.
测试采用加速度传感器、激光位移传感器以及力传感器进行测量，分析时程曲线，比较结构的隔震效果。
The functions can be realized by the system, for example, display in same time about image, test frame, luminance value and set parameter, and wide-range measure...
该系统的建立，可实现图像、测试框、亮度值、设定参数的同屏显示及宽量程测量等多种功能。
The functions can be realized by the system, for example, display in same time about image, test frame, luminance value and set parameter, and wide-range measure, etc.
该系统的建立，可实现图像、测试框、亮度值、设定参数的同屏显示及宽量程测量等多种功能。
Metal test frame, equipped with adjustable supporting feet, fabric installation clip and aluminum ashes plate. But will set a placed in optional on the balance of and digital readouts.
金属测试架，配有可调支脚，织物安装夹及铝制灰烬盘。可将套具放置在可选配的天平上并数字读数。
If you want to use this test client, from the EJB Server Configuration Screen in Figure 6, right-click EJB (from the frame on the right) and then select Run test client.
如果您希望使用这个测试客户机，请在图6中的“EJBServerConfiguration屏幕”右键单击eJB(从右边的框架)，然后选择RunTestClient。
The theories frame, design project and test process of the objective measurement system are introduced and the technical nods are discussed.
介绍了客观测量系统的理论框架、设计方案和测试过程，并对其技术难点进行了讨论。
RESULTS:Force platform could be used to test the static maximum force and the fatigue characteristics of the muscle during stand up by an additional bar frame .
结果：通过辅助杠铃架，用测力台可实施静力性蹬伸最大力量、疲劳特性的测试；
At last, based on the test results, the proposal of how to strengthen the SCFT frame has been presented.
最后，依据试验结果，提出了方钢管混凝土框架结构的抗震加固设计建议。
This is based on some longer time frame support or resistance, or on the test of a previous significant high or low.
这是根据长期的时间周期的支撑或阻力决定的，或者是根据对前期高低点的测试来做决定的。
The contents about how to execute conformance testing on multifunction vehicle bus (MVB) devices and how to realize the test in MVC Frame are expounded.
重点描写了对多功能车辆总线(MVB)进行一致性测试所包括的内容、测试的方案和步骤，以及如何在MVC这种优秀的框架中实现。
The static load test was done on the frame beam strengthened by CFRP with frame joint anchored in different mode, and the bearing capacity, deflection and width of crack was surveyed.
对采用不同梁端锚固方式的碳纤维布加固框架梁进行静载试验研究，在承载力、挠度及裂缝开展等方面进行了综合比较和分析。
Logical frame method is to test project effect and function through vertically logical relations and to appraise the resources and the achievement through horizontally logical relations.
逻辑框架法是通过垂直逻辑关系检验项目的效果和作用，通过水平逻辑关系对资源和成果进行说明和评价。
Based on SEM observance, the methods of gas adsorption and mercury pression were used to test micro hole frame parameters of mylonite and high grade gneiss in this paper.
本文在扫描电镜观测的基础上，运用气体吸附法和压汞法对郯庐断裂系南段糜棱岩和高级片麻岩的微孔隙结构参数进行了测试。
Through series river model test, Use new steel concrete permeable tetrahedron frame, to do river regulation experimental study in sediment-laden river wandering channel.
通过系列河工水槽试验，应用新型钢筋混凝土四面体透水框架，进行多沙河流游荡型河道整治试验研究。
The properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is (installed) on a mechanical test machine.
利用安装在拉伸试验机上的像框剪切装置，研究了平纹预浸碳纤维机织织物的剪切行为。
In this paper, the vibration characteristics of frame foundation for steam turbine-generator set are performed by model modal test method.
采用模型模态试验方法对汽轮发电机组框架式基础的振动特性进行了研究。
In this paper, together with road simulation test, reliability theory and FEM, the fatigue life and degree of reliability were analyzed based on the construction of the frame.
论文在对车架结构模型构建的基础上，将道路模拟试验、可靠性分析理论和有限元分析方法等结合起来，分析其可靠度及疲劳寿命。
In this paper, the vibration characteristics of frame foundation for steam turbine generator set is performed by model modal test method.
采用模型模态试验方法对汽轮发电机组框架式基础的振动特性进行了研究。
The strain test in the agricultural machinery field was used to probe the stress variation inside a frame in order to examine the strength of the plastics greenhouse frames.
为验证大棚骨架的强度，用农机测试中的应变测量法，来探索其内部应力的变化情况。
The developing direction of test system is pointed out. The application status of COM technology in ATS are discussed, and a universal test software frame based on COM is brought forward.
指明了测试系统的发展趋势，论述了COM技术在自动测试系统中的应用现状，提出了一种基于COM技术的通用测试软件体系结构。
The real vehicle crash test indicates that the crashworthiness of the frame structure has improved apparently.
实车碰撞试验表明：改进后，车架结构的耐撞性有明显提高。
This paper introduces a steel frame model PSD test carried out by the equivalent SDOF substructural PSD test method.
本文主要介绍在我院力学-结构试验中心首次进行的钢框架子结构伪动力试验。
The second test aims to a motor frame, we can conclude from the experiment that the instrument can analyze multiple modes of complex structure and display its modal vibration shapes.
其次对一摩托车架进行了试验模态分析，试验表明仪器能较好地分析出车架的多阶模态，并显示出其模态振型。
The paper analyzes frame architecture of PPM code in detail, illustrates pulse-number method and implementation principle of the circuit, and supplies test result of the circuit.
详细分析了PPM编码的帧结构，说明了脉冲编号的解码方案以及电路的实现原理，最终给出电路的仿真测试结果。
The paper analyzes frame architecture of PPM code in detail, illustrates pulse-number method and implementation principle of the circuit, and supplies test result of the circuit.
详细分析了PPM编码的帧结构，说明了脉冲编号的解码方案以及电路的实现原理，最终给出电路的仿真测试结果。
应用推荐