The writer of this paper did a lot of experiments and analysed the tensile behavior for weft knitted structural composites.
本文对针织纬编结构复合材料的拉伸性能进行了试验研究。
This research was done on the tensile behavior of high performance cement-mortar to concrete through core-drilling and pull-stripping test.
研究了高性能水泥复合砂浆与混凝土之间的粘结性能。
The tensile and fatigue fracture mode is also different in different aging conditions, which is affected by the slip behavior of the alloy.
在不同时效状态，合金的拉伸和疲劳断裂方式亦不同，拉伸和疲劳断裂方式受合金形变行为的影响。
This measured stress strain behavior is then co-related with the physical properties measured by routine tensile tests of the similar type of propellant which is aged artificially.
然后将所测得的应力应变行为与经人工时效的推进剂拉伸试验测得的物理参数建立起相应的关系。
Simple tensile tests and low-cycle fatigue tests under stress control at different temperature were conducted to investigate the effects of temperature on fatigue behavior and fatigue strength.
通过不同环境温度下的简单拉伸试验和应力控制下的低周疲劳试验，找出了环境温度对应力控制下的疲劳行为和疲劳强度的影响。
The ageing precipitation and strengthening behavior of 7B04 aluminum alloy were investigated by DSC, TEM, HREM, SAED and tensile testing techniques.
利用差示量热法（DSC）、透射电镜（TEM）、选区电子衍射（SAED）、常规力学性能测试等手段研究了7B04铝合金时效沉淀析出及强化行为。
The effect of the micro residual stress on material properties during tensile is analyze. This theory mentioned above can be used to analyzed the mechanics behavior of composites.
探讨了在单向拉伸时该残余热应力对材料性能的影响，为分析复合材料的力学行为提供理论指导。
They are mainly concerned with the tensile and compressive behavior, energy absorption, dynamic impact, failure criterion and constitutive relation, creep, fatigue and fracture of these materials.
这些工作主要讨论了金属泡沫材料的拉伸、压缩、能量吸收、动态冲击、失效准则、本构关系、蠕变、疲劳和断裂等力学性能。
High temperature deformation behavior of Ti-6Al-4V (TC4) was studied by using the constant rate tensile test under different deformation conditions in MTS high temperature tensile experimental system.
采用普通工业TC4板料，在MTS高温拉伸试验系统上进行了不同变形条件的恒速拉伸试验，研究材料的高温变形行为。
The relation between splitting tensile strength and compressive strength and the effects of steel fiber types and volume ratio on behavior of the deformation of split failure are discussed.
探讨了劈拉强度与抗压强度的关系、钢纤维体积率及钢纤维类型对劈拉变形性能的影响。
The result of insitu-tensile test shows that the behavior of fracture is transcrystalline rupture.
扫描电镜下的原位准静态拉伸试验表明，合金的断裂行为是穿晶韧性断裂。
The tensile damage behavior involves:matrix microcracking, transverse bundle cracking, interfacial debonding, fiber fracture, ply delamination and bundle splitting.
拉伸破坏损伤表现为：基体开裂，横向纤维束开裂，界面层脱粘，纤维断裂，层间剥离和纤维束断裂。
In a certain range of tensile temperature, the stress strain behavior of polyolefins studied showed good similarity.
一定温度范围内聚烯烃均出现显著的应力波动现象，形变不均匀、不稳定。
The mechanic behavior of Cable-girder anchorage with tensile anchor plate is gained;
分析了索力在锚拉板及其与之相连接构件之间的分配和传递规律；
It has good physical properties, including high tensile strength, abrasion resistance, at high temperatures good dynamic behavior and flex cracking resistance at elevated temperatures.
HNBR具有非常优越的物理性能，包括高的抗拉伸强度，抗撕裂，高温动态使用和逐递上升温度中的抗屈挠防裂性能。
The tensile strength, toughness, hardness, constant current corrosion performances and gas evolution behavior were detected and analyzed.
测试并分析了该合金的强度、塑性、硬度、恒流腐蚀及析气等特性。
Test results show that granite dynamic mechanical behavior of compression and splitting tensile has distinguishable strain rate effect.
试验结果表明，花岗岩的动态压缩和动态劈裂拉伸的力学性能表现出显著的应变率效应。
The effect of the PCL block DPn on the crosslinking, crystallization behavior, tensile properties and shape memory properties of SPCLU networks were studied in detail.
研究了PCL嵌段聚合度对SPCLU交联特征、结晶行为、力学性能及形状记忆性的影响。
Both the standard uniaxial tensile tests and the small punch tests were accomplished to study the creep behavior of TA2 at room temperature.
小冲孔蠕变试验技术是一种采用微小试样评定材料高温蠕变性能的新方法。
Both the standard uniaxial tensile tests and the small punch tests were accomplished to study the creep behavior of TA2 at room temperature.
小冲孔蠕变试验技术是一种采用微小试样评定材料高温蠕变性能的新方法。
应用推荐