Temperature and flow fields, and interfaces of water freezing in soil and crude oil solidifying in the pipeline were obtained through numerical simulation.
通过数值模拟，获得了停输期间温度场、流场以及土壤水分结冰界面和管道中原油凝固界面的分布情况。
Based on induction heating theory, prediction model of CC slab temperature distribution was built and numerical simulation for induction heating process was carried out.
本文应用感应加热理论，建立了连铸坯料温度分布的预测模型，对感应加热过程进行了数值模拟。
Hot crack numerical simulation has been handled by 'solidification-feeding' model based on temperature field.
本文使用基于温度场的凝固补缩模型来进行热裂纹数值模拟。
The relevant relations of regenerator medium, exchange time, temperature efficiency and thermal efficiency are analyzed by(numerical) simulation.
通过数值模拟分析了蓄热体材质、换向时间、温度效率和热效率等的关联关系。
The temperature field and thermal stress field on the crack tip in a metal was studied by numerical simulation method.
用数值模拟方法研究了金属裂纹尖端的温度场和热应力场的分布情况。
The results obtained by both numerical simulation and the measured rock temperature in bores proved that the mathematical expression of temperature distribution law is close to practice.
数值模拟法和地质钻孔测温法所得结果证明，新的地温场温度分布规律表达式是符合客观实际的。
Using the developed numerical simulation software of temperature field, the solidification process of wear resisting cast ball in metal mold was numerically simulated.
利用温度场数值模拟软件对金属型耐磨铸球的凝固过程进行了数值计算。
In this paper, the optimum designing method for dimension of ingot mould based on numerical simulation of temperature and thermal stress field in a cycle of use is proposed.
本文提出以钢锭模一个使用周期的温度场和应力场的数值模拟结果为依据优化设计钢锭模的方法。
Numerical simulation of temperature field during al solidification process under static high pressure has been conducted.
采用数值模拟的方法，研究了纯铝在静高压作用下凝固过程温度场的变化情况。
Numerical simulation of flow and temperature field in the test tube of Model Loop Wax Deposition Apparatus was performed.
对模型环道蜡沉积装置测试段流场温度场进行了数值模拟。
Two dimensional numerical simulation is presented for flow and heat transfer in rectangular microchannel with uniform wall temperature in slip regime.
在等壁温边界条件下对矩形微细通道速度滑移区的对流换热进行了二维数值模拟。
The deformation law of both solid and local upsetting processes for cylinder forging is investigated by moire method at room temperature and numerical simulation in this paper.
本文用常温云纹法与数值模拟法研究了筒体锻件整体镦粗与局部镦粗工艺的变形规律，得到了整体镦粗工艺的坯料尺寸图。
The numerical simulation method was used to study the heat transfer and temperature distribution of rolling piece during hot strip rolling.
采用数值模拟方法研究了带钢热轧区轧件传热和温度场分布规律。
The temperature field and thermal camber of the roll are made in numerical simulation by finite difference method and the calculation values coincide better with the measured values.
采用有限差分法对轧辊温度场和热凸度进行了数值模拟，计算值和实测值吻合较好。
Three-dimension fluid field coupled with temperature field numerical simulation program was debugged. And worked out, three-dimension mold filling course can bitterly numerical simulated.
编制调试了三维充型过程的流场、温度场耦合数值模拟计算程序，能够较好地数值计算模拟铸件三维充型过程。
Analysis of numerical simulation is used on flow field and temperature field in mechanical seal cavity.
对机械密封腔内流场和温度场进行了数值模拟。
The model establishment and numerical simulation of SAR and the instantaneous temperature distribution for no-wound tumor rf thermotherapy are performed in this paper.
本文针对非侵入性射频热疗的SAR场及瞬态温度分布进行建模和数值模拟计算。
The temperature distribution, density and gas yield of the biomass fuel bed were obtained by numerical simulation.
通过数值模拟，得出了燃料层热解过程中的温度场的分布、层内固体密度的变化以及气体的生成规律。
In this paper, the microbuss temperature field and velocity field is researched through numerical simulation and experiment for the first time.
本文首次采用数值计算和试验相结合的方法对微型面包车车室内温度场、速度场进行了研究。
Thirdly, the study is the numerical and experimental simulation on that the temperature field of the bed in the snake loop heat pipe chemical reactor.
第三部分为热管化学器内部床层温度场数值模拟与试验研究。
In this paper, by the use of FLUENT, a numerical simulation was conducted of roller hearth kiln temperature field before and after the temperature even installed.
利用FLUENT软件对辊道窑垂直安装温度均匀器前后窑内温度场进行了数值模拟。
This paper mainly does research for the numerical simulation of temperature distribution of barrel of injection molding machine in electromagnetic induction heating.
本文主要研究电磁感应加热器加热注射机料筒时料筒温度分布的数值模拟。
The temperature, volumetric water content and water table evaporation strength in varied air convection velocity were obtained by means of numerical simulation and experimental measurement.
通过数值计算和实验测量，获得了不同大气对流速度作用下土壤中温度、含水率分布。
An electrical heating rope is proposed based on numerical results for improving surface temperature uniformity of the simulation spherical shell.
在数值模拟基础上，提出并试验验证了能有效提高球壳外表面温度均匀性的电加热绳方案。
The numerical simulation of the velocity field and temperature field of the natural convection in porous medium with a trapezoid space was conducted.
本文对填充有多孔介质的梯形空间内的自然对流的流场和温度场作了数值计算。
The cause of turbine stator blades was analyzed on the base of numerical simulation by means of air-thermal coupling for heat transfer and temperature distribution.
在内部流场气-热耦合数值模拟的基础上，研究了某涡轮导向器叶片烧蚀故障的原因。
The temperature distribution of the tuyere as well as the influence of impurity and incrustation scale on the temperature field of the tuyere were investigated using numerical simulation method.
为此，用计算机模拟的方法研究了高炉风口的温度分布及杂质含量和水垢对水冷铜风口温度场的影响。
The numerical simulation of temperature field and shrinkage defect prediction for a valve casting, which was involved in 4 kinds of casting proces.
对采用4种不同铸造工艺方案的阀体铸件凝固过程进行了数值模拟及缺陷预测，获得了与试验相一致的模拟结果。
Using numerical simulation software, the paper analysis the influence of secondary air to the pollutant discharged in high temperature and low oxygen air combustion.
利用数值模拟软件分析了二次空气对高温低氧空气燃烧污染物排放的影响。
Also, reasonable suggestion for improving water injection technics can be proposed to identify water injection profile better with temperature log by analyzing the results of numerical simulation.
同时，对如何改善注水工艺，以提高井温测井识别注入剖面的能力提出了合理化建议。
应用推荐