Heaters in the G-Series and M-Series product lines use a high-temperature material for their surface face.
系列和M系列产品线中的加热器使用高温材料作为加热器表面。
The theory and feasibility is analyzed, for measuring Linear Expansion Coefficient of high temperature material by moiré interferometry.
分析了激光云纹干涉法测量高温材料热膨胀系数的原理和可行性。
Some of the solid material it brings up may come from a so-called diamond-stability field, where conditions of pressure and temperature are conducive to the formation of diamonds.
它所带出的一些固体物质可能来自所谓的钻石稳定场，那里的压力和温度条件有利于钻石的形成。
The computer in the farmhouse is checking the temperature, the water and the level of organic material in the soil.
农舍里的电脑正在检查温度、水和土壤中有机物质的含量。
If all of the material is heated to the glass transition temperature, no folding will occur.
若所有材料以玻璃转变温度进行加热，那就再不能进行折叠了。
When you lower the temperature, or in some cases stress the material or impose a magnetic field, the system tries to reach a different state that is more stable.
当你降低温度时，或者在某些情况下对材料施加压力或施加磁场，这个系统会试图变成一种更稳定的其他状态。
The third is to be certain that the temperature gradient which that badly conducting material creates is not frittered away by poor design.
第三是确保那种导热性差的材料产生的温度变化率不因为设计缺陷而白白浪费。
What's the boiling point or the sublimation temperature of some material at a particular pressure?
物质的沸点，或者升华温度是什么？，在某个压强下？
First, the surface temperature of the hinge must exceed the glass transition temperature of the material, which is the point at which the material begins to soften.
第一，折痕表面温度必须超过材料向玻璃过度的温度点，即材料开始变柔软的温度点。
What I really want to do is just give an example of what happens when you throw the thing, the material into a calorimeter and see how much the temperature changes.
我想做的是给出当，你把这些东西，这些材料扔进，量热计时会发生什么，看看温度会变化多少。
Let's take it to be the temperature of the boiling point of the pure material.
让这个温度等于，纯的物质的沸点温度。
A new polymer material that can repeatedly heal itself at room temperature when exposed to ultraviolet light presents the tantalizing possibility of products that can repair themselves when damaged.
一种新的聚合物材料在室温紫外光照射下可以不断地进行自我恢复，这一特性表示日后的产品在受损后也可以自我修复。
The conductivity of this material increases as the temperature increases.
该材料的导电率随温度的上升而增加。
Nesting material should be added in sufficient amounts to avoid both extreme temperature situations mentioned above and assure that the eggs have a soft, secure place to rest.
筑巢材料应该被添加到足够多，避免以上所提到的极端的温度状况，并确保鸟蛋被放置在一个温和安全的地方。
The third is to be certain that the temperature gradient which that badly conducting material creates is not frittered away by poor design.
第三，要肯定的是，温度梯度要采取导热不好材料进行创建，而不要因为不良的设计而一点一滴地浪费。
For this reason, a vacuum dryer is especially suited to drying a heat-sensitive material that degrades above a given temperature and would otherwise require a lengthy drying cycle.
基于这个原因，真空干燥机是一个特别适合干燥热敏感材料，降低上述给定的温度，否则将需要一个漫长的干燥周期。
Besides negative thermal expansion, the researchers also found that changes in temperature lead to a significant variation in the porosity of the material, which is therefore highly controllable.
除了负的热膨胀效应，研究人员也发现了温度改变引起的材料多孔性的明显改变，因而这种多孔性就变得高度可控。
Nests of loosely arranged sticks, rocks, or dirt are cooler in temperature at the bottom where the egg contacts the nesting material.
用细棍、石子或泥土松散地搭建的巢穴在筑巢材料与鸟蛋接触的巢底温度是比较低的。
To find an appropriate material, Dr Kiser assembled a “library” of polymer mixtures and searched for one with the peculiar property of being liquid at room temperature, but solid at body temperature.
为了找到合适的材料，Kiser博士建立了一个聚合混合物“图书馆”以寻找一种具有室温下是液体但体温下是固体的特有性质物质。
Then adopt GC/MS to analysis each fraction qualitatively and quantitatively , investigate the distribution situation that the main material in different temperature range.
然后采用GC/MS对各个馏份进行定性、定量分析，考察了主要物质在不同温度区间的分布情况。
The interplay between the lipid spheres, called giant vesicles, and the strands of DNA produces a unique response when the material is exposed to changes in temperature.
该材料在遭遇外界温度改变时，被称为巨大囊泡的脂质微球与DNA链相互作用可以产生一种独特的响应。
The rate at which material temperature can be raised in a vacuum dryer is also limited.
烘干机的速度在真空材料的温度可提高一个也是有限的。
Minimum and maximum temperature limits for the coated surface and for ambient air shall be supplied by the coating material supplier and must be followed.
对涂层表面和环境空气的最大温度和最小温度的限制应当由涂层材料供应商提供，并应严格遵守。
Service temperature should be considered in selection of the proper thermoplastic valve material for the application.
在实际应用中选择适当的热塑性塑料阀门材质时应该考虑工作温度。
In powder forging an as-pressed component is usually heated to a forging temperature significantly below the usual sintering temperature of the material and then forged in a closed die.
在粉末锻造中，压制零件一般加热到远低于该材料通常烧结温度的锻造温度，然后在闭模中锻造。
Insulation system: adopting germany-made insulation material, radiation reduction temperature, heating time brief loss of diffusion warming faster.
保温系统：采用德国进口保温材料辐射材料加工而成，减低温度扩散损耗，简短加热时间升温快。
If severed, the material mends itself when the ends are pressed together for a few minutes at room temperature.
如果断了，只需在室温条件下将断裂的两端按在一起几分钟，这种材料即可自我修复。
The low power, low noise, blower fan, wind knife mouth dry air temperature is used, the effective protection of material itself color and quality, the effect is better.
采用低功率、低噪音的风机，吹风口成风刀状，吹干风温为常用温，有效保护物料本身的色泽和品质，效果更佳。
The low power, low noise, blower fan, wind knife mouth dry air temperature is used, the effective protection of material itself color and quality, the effect is better.
采用低功率、低噪音的风机，吹风口成风刀状，吹干风温为常用温，有效保护物料本身的色泽和品质，效果更佳。
应用推荐