Furthermore, 17 step temperature load spectrum was compiled for the pipeline.
进而编制出这管线低-高-低17级温度载荷谱。
The vertical stress in the silo wall are not obviously influenced by temperature load or material pressure.
环境温度作用所引起的仓壁竖向应力与由贮料侧压力所引起的仓壁竖向应力差别不太大。
Based on these formulas, computations of the temperature load in arch DAMS are discussed in the second part.
第二篇就在这些公式的基础上讨论了拱坝温度荷载的计算。
Analysis of qualities stress of bridge includes of action of dead load, car load, temperature load of season character.
分析桥梁受力性能时考虑了结构自重、车辆荷载和季节性温变荷载的作用。
Paper researches and analyses the stability performances of curved girder bridge under vertical load and temperature load.
论文将就竖向荷载与温度荷载作用下，该类曲线梁桥的稳定性能进行研究分析。
The structure with anomalous plane or calculating temperature load will bring large error when the rigid-floor hypothesis is adopted.
对于平面不规则或考虑温度荷载工况的结构，刚性楼板假定会产生较大误差。
The current specification is not directly consider the role of the temperature load on the structure only for Construction requirements.
而目前国内规范没有直接考虑温度荷载作用，对结构只作构造上的要求。
The stress and deformation of the concrete box girder under the temperature load is one of the main factors affecting engineered quality.
温度荷载作用下的混凝土箱梁的应力和变形，是影响工程质量的主要因素之一。
Finally, temperature load caused by large fire was applied as node load to the lattice shell structure and non-linear FEM analysis was performed.
最后，将得到的升温情况分荷载步施加到大跨度网壳结构上，进行结构的非线性有限元分析。
Based on the finite element theory of non-linear thermal coupling, coupledly analyse the interaction between temperature load and the deformation.
体现了铝板坯铸轧过程为材料非线性、几何非线性和接触非线性的大变形。
The temperature load was then applied as node load to the lattice shell, which is the roof structure of the warehouse, and FEM analysis was performed.
将温度场以节点荷载的形式施加到网壳结构上，进行有限元数值分析。
Virtual temperature load method to adjusting the tension force in the cable is proposed, and its computing procedure and iteration expression are given.
提出了斜拉桥调索计算的斜拉索虚拟温度荷载法，给出了该方法的计算流程和迭代表达式。
In the view of the concrete's minute construction, cement and mortar encircled bone, there is tiny crack on interface of bone and mortar under temperature load.
从混凝土组成的细观角度出发，研究水泥砂浆包围的骨料，在温度荷载作用下首先在骨料与砂浆的界面上产生界面微裂缝。
The face-face contact pair is used to simulate the pile soil contact face, and the temperature load is used to simulate the side pressure of soil layer to the pile.
该模型土层定义为弹性，以面面接触对模拟桩土接触面，温度荷载模拟土层对桩的侧压力。
On the base of actual bridge observation and test research, this paper discusses the temperature stress effect to concrete box girders which caused by temperature load.
在实桥观测与试验研究的基础上，对温度荷载所产生的温度应力对混凝土箱梁的作用进行了探讨。
Generally, arch dam is relatively thin, and sensitive to the changes of outside temperature and water temperature, so temperature load has become one of the main design loads.
拱坝一般比较单薄，对外界气温和水温的变化比较敏感，温度荷载也就成了拱坝的主要设计荷载之一。
In the computation of stress field, the factors, such as temperature load, deadweight of concrete, water potential, creep stress and self expansion of concrete, are involved in the program.
计算中考虑了温度荷载、自重、静水压力、混凝土徐变和自生体积变形等情况。
To the RCC concrete that under design RCC concrete age when flowing design flood, the stress value considered the temperature load is bigger than that does not consider the temperature load.
对于过洪时未到设计龄期的混凝土，考虑温度载荷的应力值大于不考虑温度载荷的应力值。
Temperature load is one of the main loads to incur the deformation and the variation of stresses of Bridges. So, temperature measurement is an important component of health monitoring for Bridges.
温度荷载是引起桥梁变形和应力变化的主要荷载之一，因此对桥梁的温度进行监测是桥梁健康状况监测的重要组成部分。
Let's see how Load would be used to call the weather temperature service discussed previously.
我们看看如何使用Load来调用前面讨论的天气温度服务。
Primary effects include gravity and wind - but at a secondary level, you have to think about temperature and moisture changes, the materials slightly deforming under load.
初始效应包括重力和风——但在二次效应层面上，你就得考虑气温和水分变化，材料因负重导致的轻微变形。
When using the washing machine, be sure there's a full load and turn the temperature down if it's not really grubby.
使用洗衣机时，确认满载，如果衣服不是很脏就把温度调低。
This paper emphatically describes how to lift its fume exhaust temperature under low load running of a boiler so as to reduce low temperature corrosion.
重点论述了在锅炉低负荷运行状态下提高排烟温度的方法，以达到减少低温腐蚀的目的。
The mean relative deviations of the predicted heat load, heat efficiency and temperature are less than 10%.
预测的热负荷、热效率及温度的平均相对误差均小于10%。
Different outdoor temperature of the gas engine heat pump under the heat load for the heat, heat the remainder of the engine, the system changes in a power relationship.
不同室外温度下的燃气机热泵热负荷、供热量、发动机的余热量、系统一次能耗的变化关系。
The cylinders must fire in the proper order and at a precise instant, depending on engine speed, load and temperature conditions.
各缸的点火应该有合适的顺序和精确的时间，这取决于发动机的转速、负荷和温度。
This paper states the temperature stress and load value, puts forward the conformation measures of crack control in structural design and construction.
本文论述了温度应力、温度荷载的取值，并根据实际情况提出了结构设计和施工时裂缝控制的构造措施。
Emphasizes the variation of peak load regulating with ambient temperature, the design of terminal heat radiators, and the design operating parameters of geothermal heat exchangers in indirect systems.
重点分析了间接式地热供热系统调峰负荷随环境温度的变化，以及所受末端散热器设计、地热水与循环水换热器设计运行参数的影响。
The STK7300 provides excellent regulation over variations in line , load and temperature.
STK7300提供优秀的规管在一致的变化，负载和温度。
The influence of load level, temperature, time and other factors on the creep behavior have also been analysed.
本文还对时间，载荷水平、温度和其它因素对蠕变的影响也做了进一步的研究。
应用推荐