Study on technological conditions such as sintering temperature holding time and the particle diameter which impact the whiteness.
讨论了工艺条件如烧成温度、保温时间、颗粒直径对试样白度的影响。
Microstructure determined by both sintering temperature and high temperature holding time would influence acid corrosion resistance.
研究表明陶瓷烧结温度和保温时间均对陶瓷的显微结构有影响，进而影响陶瓷的耐酸腐蚀性能。
This paper discusses the influence of liquid adding rate, temperature holding time, flake treating manner and temperature on cladding rate.
讨论了滴液速率、保温时间、鳞片的处理方式及温度对包覆率的影响。
Results indicated that activation temperature, temperature holding time and activation agent ratio determined the depth of activation and the micropore distribution.
实验结果表明，活化剂用量、活化温度和活化时间都决定着活化反应的深度。
The significant external factors affecting acid-catalytic ethanol pulping of wheat straw were ethanol consistency, pulping temperature, acid dosage and temperature holding time.
影响酸催化乙醇法制浆的主要因素有液比、蒸煮温度、乙醇浓度、催化剂用量和保温时间。
The mathematic models of the temperature holding of continuous cast ingot in the pit and the in line control are established, and the temperature holding effectiveness of the pit discussed.
建立了保温坑内连铸坯保温过程数学模型及在线控制数学模型，并讨论了保温坑的保温效果。
With the Copenhagen talks intent on holding temperature rises to 2c, Huq warned that further extreme weather events and disasters were inevitable.
对于哥本哈根谈判致力于控制气温升高2摄氏度，胡克警告说，更极端的气候事件和灾难不可避免。
Then we can take the derivative of that quantity, when we vary the temperature, holding the volume constant.
即恒定体积，改变温度，这里恒定温度下。
The rate of antioxidant degradation is affected by extrusion temperature, holding time, heating methods and the activation energy of the antioxidants.
挤压稳定化温度、保温时间、加热方法和抗氧化组分的活性能影响抗氧化组分的分解速率。
Generally we considered the affection elements of the temperature test results, is the temperature, holding time, temperature change rate and so on.
通常认为，影响温度试验效果的要素有温度、停留时间、温变率等。
Note: Warming an otic product by holding the bottle in hand for 1-2 min may minimize dizziness and pain on application; do not heat above body temperature.
注：气候变暖的产品的耳举行瓶子手1 - 2分钟可最大限度地减少头晕和疼痛中的应用；不热上述体温。
Effect of sintering temperature and sintering holding time on green density was analyzed.
分析了烧结温度和烧结保温时间对压坯密度的影响。
The results show that heating temperature and holding time are two important factors affecting the grain size and uniformity.
实验表明，加热温度和保温时间是影响晶粒尺寸和均匀性两个重要的因素。
The result indicates that under different quenching temperature and holding time, the formed bainite morphology are different.
结果表明，在不同淬火温度和保温时间下形成不同的贝氏体形貌。
The effects of the aging temperature and holding time on the microstructure and hardness of the ultra-low-carbon steel bearing copper were investigated.
研究了时效温度和保温时间对时效硬化型超低碳含铜钢的显微组织和硬度的影响。
The microstructure of AZ61 magnesium alloy by strain-induced melt activation (SIMA) process was studied to reveal the effects of prior compressive deformation, isothermal temperature and holding time.
研究了AZ61镁合金在应力诱发熔体激活法(SIMA)制备半固态坯料过程中预变形量、等温温度和保温时间对其组织的影响。
The influence of the rate of heating at phase transformation region, temperature of austenitizing and holding time on the austenite grains are studied.
讨论了在相变区的加热速度、奥氏体化温度及保温时间对奥氏体晶粒的影响。
The effects of solid-solution temperature and holding time on the grain growth and hardness of GH4169 superalloy were investigated.
研究了热处理温度和保温时间对GH4169合金晶粒长大规律和硬度的影响。
The effect of heating temperature, holding time and cooling mode on its crystallizability and dissolution rate of potassium is not obvious.
改变合成温度、保温时间以及冷却方式等，对合成试样的结晶性能以及试样中钾元素溶出率的影响很小。
The effects of baking temperature, holding time and binder on secondary luminescence properties of phosphor were systematically explored.
研究了烧结温度、保温时间以及粘结剂对荧光粉二次性能的影响。
In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.
研究了白云石的煅烧温度、保温时间以及掺量等对水泥物理性能和膨胀行为的影响规律。
The processing parameters of PEEK composites include cooling rate, forming pressure, forming temperature and the holding time in melt.
其成型工艺参数包括冷却速度、成型压力、成型温度、保温时间。
By changing heating temperature and holding time, the austenite grain growth behavior of a low carbon steel under different heating conditions was studied.
通过改变均热温度和保温时间，研究低碳钢的奥氏体平均晶粒尺寸与时间的关系，及奥氏体晶粒各尺寸范围的分布规律。
The result shows that the decarburization depth increases with the increase in temperature and holding time for the two steels.
结果表明，两种弹簧钢的脱碳深度随提高加热温度和增加加热时间增大。
The annealing process was made under different temperature and holding time to the cold forging AZ31 magnesium alloy with different deformation ratio.
对不同变形量的冷锻az31镁合金在不同温度和保温时间下进行退火。
The influence of sintering temperature and holding time on the density, micro-structure and mechanical properties of the ceramic tool materials are studied.
对烧结温度、烧结时间等工艺参数对材料力学性能、微观结构和致密度的影响进行了分析。
The influence of some factors, for instance, liquid aluminium temperature, holding time and pressure, etc., upon the manufacturing process is discussed.
讨论了铝液温度、保温时间和压力等因素对制造过程的影响。
The influence of some factors, for instance, liquid aluminium temperature, holding time and pressure, etc., upon the manufacturing process is discussed.
讨论了铝液温度、保温时间和压力等因素对制造过程的影响。
应用推荐