This paper introduces a temperature fuzzy control system of electric furnace. The basic theory design method and experimental results of fuzzy controller are described.
本文介绍了微机模糊控温系统。阐述了模糊控制器的原理与设计。给出了实验结果和结论。
The result shows that this system with fuzzy control could control the electronics temperature effectively.
结果表明此主动热控系统能对航天器电子设备温度进行有效控制。
A fuzzy controller for the greenhouse is designed, and the fuzzy control system of the greenhouse temperature is built up.
设计出模糊控制器，并建立温室温度的模糊控制系统。
A fuzzy controller with integral parameter is designed, and applies it to the temperature control system of resistance furnace.
设计了一种带有积分参数的模糊控制器，并将其应用于电阻炉的温度控制系统。
This paper presents temperature of control system based on FUZZY-PI for the production of compound fertilizer.
本文根据复合肥制造工艺要求，提出了一套基于FUZZY - PI的温度控制系统。
The design of an expert fuzzy control system which applies expert system theory and fuzzy control theory to temperature control process is described.
将专家系统和模糊控制的理论应用到温度控制过程中，介绍了这类专家模糊控制系统的设计方法。
A study is made on control of temperature system based on Fuzzy self-tuning PID parameters.
对基于模糊pid参数自整定的温度系统控制方法进行了研究。
In the temperature control module, a two-phase fuzzy controller is adopted to enhance the system response speed and the temperature control precision.
在温度控制模块中，采用分阶段模糊控制的方法提高了系统的响应速度和控制精度。
Taking the thermodynamic system of radiator testing stand as a controlled object, studies the fuzzy control process of rule self-tuning for supply air temperature in air circulation systems.
提出了一种模糊控制规则实时校正算法，并以散热器实验台热工系统为被控对象，研究了风循环系统送风温度的规则自校正模糊控制过程。
It separates the complicated incubation controlling system into heating fuzzy and adding wet fuzzy controlling system so that the fuzzy control of temperature and humility can be achieved.
将复杂的孵化控制系统分解成加温模糊控制系统和加湿模糊控制系统，实现了温度、湿度的模糊控制。
A new fuzzy control method for electric stove temperature system is Wahar overviewed in this paper. It simplifies the MIMO relations and is successfully applied in practice.
从工程实践出发提出一种对多输入多输出温度系统进行模糊控制的方法，简化了多输入多输出之间的模糊关系，并得以成功应用。
This paper introduces the design of the fuzzy control node of temperature in greenhouse based on a MCS196 Micro - computer and the component of the greenhouse control system.
介绍了一种利用MCS196单片处理机实现的温室温度模糊控制节点的设计及温室控制系统的组成。
In this paper, we present the model of fuzzy controller and fuzzy control algorithm, which is used to the system of temperature control and the result is effective for control.
提出了模糊控制器的模型和模糊算法，并把它应用到温度控制系统中去，得到了良好的控制效果。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY-PID 控制系统，对陶瓷工业窑炉的温度进行控制。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY -PID控制系统，对陶瓷工业窑炉的温度进行控制。
Aiming at the characteristics of large delay, great inertia, strong coupling and time varying in the control system of tobacco leaf fermenting temperature, a fuzzy control system is put forward.
针对烟叶发酵温度控制系统的大滞后、大惯性、强耦合、时变的特点，提出了一种烟叶发酵温度的模糊控制系统。
In addition, the temperature control is made more precise and flexible due to the adoption of the hide-in temperature detector and temperature control algorithm based on the fuzzy expert system.
同时，采用内藏式温度传感器和基于模糊专家系统的温度控制算法，使腐蚀系统的温度控制更加精确、灵活。
We adopt a rule of three steps fuzzy control system applying to temperature control of vacuum sintering furnace.
采用了一种三段规则的模糊控制策略，对真空烧结炉的温度进行控制。
An optimized algorithm combining the fuzzy control with the PID control has been put forward, realizing a good control of the temperature system in the high frequency heating equipment.
提出一种模糊控制与PID控制相结合的优化算法，实现了对高频加热设备温度系统的良好控制。
In the end, the process of the fuzzy control for the temperature indoor has been studied by experiments, by using the building thermal system as the controlled object.
最后以建筑热工系统为被控对象，试验研究了测试室温度模糊控制过程。
In view of the features of injection moulding machine, fuzzy control and monitoring system was devised and a fuzzy decoupling algorithm was adopted to control the temperature in the charging barrel.
针对注塑机的特点，设计了模糊控制与监测系统，并采用一种模糊解耦算法进行料筒温度控制。
A kind of parameter self-regulation fuzzy controller used in the temperature control system of furnace is introduced.
介绍了一种用于炉温控制系统中基于参数自调整的单片机模糊控制器。
A fuzzy and PID control method is presented for characteristics of boilers temperature control system.
针对热水锅炉温度控制的特点，采用模糊pid控制策略。
Puts forward a new kind of online interpolation fuzzy control method, and at last the controller is applied in the temperature control system of furnace.
本文提出了一种在线插值模糊控制方法，设计了在线插值模糊控制器，并在炉温控制系统中应用。
The method combines fuzzy control technology with PID algorithm and applies the multi mode control to design a control system of temperature and humidity.
该方法把模糊控制技术和PID算法结合起来，采用多模态分段控制设计出温湿度控制系统。
The simulation results show that the superheated steam temperature control system using this algorithm has better performances than that of fuzzy PID control system.
仿真结果表明，利用该算法设计的汽温控制系统比应用模糊pid控制设计的汽温控制系统具有更加优良的性能。
This paper introduces temperature control system constituted of distributed computer control system, hardware, software and control means, emphasizes discussion how to achieve fuzzy control.
文章介绍了由分级分布式计算机组成的温度控制系统的硬件、软件的组成及控制方法，着重讨论了模糊控制在其中的应用。
To avoid the disadvantage of general temperature control system based on single chip microcomputer, and acquire perfect control result, the method of PID based on fuzzy was used in the system.
该系统还采用模糊pid方法进行温度控制，能克服普通的单片机pid温度控制系统的一些不足之处，达到较为理想的控制效果。
A new superheated steam temperature control system design scheme is proposed, the main controller design is based on Adaptive Network-based Fuzzy Inference system (ANFIS).
提出一种新型的过热汽温控制方案，主控制器基于自适应神经网络模糊推理系统(ANFIS)进行设计。
A new superheated steam temperature control system design scheme is proposed, the main controller design is based on Adaptive Network-based Fuzzy Inference system (ANFIS).
提出一种新型的过热汽温控制方案，主控制器基于自适应神经网络模糊推理系统(ANFIS)进行设计。
应用推荐