Temperature field finite element during flat hot continuous rolling process with compact double stand reversing rolling mill was researched, which is the only one in China.
实现了对国内唯一一架双机架紧凑式可逆炉卷轧机板材热连轧的温度场有限元研究。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
Finite element difference method was used to simulate the temperature field of work piece during TSCR.
采用有限元差分法对连铸连轧生产过程的带钢温度场进行模拟。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
By using the Finite Element Method (FEM), the nonlinear thermal vibration characteristics of composite laminated plates under linear temperature field were investigated.
采用有限元方法研究复合材料层合板结构在线性温度场作用下非线性热振动特性。
The temperature field and microstructure field during laser heat treatment process were calculated using Finite Element Method or Finite Difference Method.
应用有限元和有限差分方法对激光热处理过程的温度场、组织场进行了数值模拟计算。
In this paper the basic theory of temperature field analysis and the solution method of FEM (Finite Element method) are introduced.
讨论了温度场分析的基本原理以及有限元解法。
In this paper, effects of material's mechanical character, microstructural anisotropy, on instantaneous temperature field is analyzed by means of the finite element method.
本文通过有限元方法计算，分析了材料力学性质细观各向异性对温度场的影响。
Finite element method (FEM) was used to partition the area of buried cables with outer heat sources and calculate the temperature field with given cable load.
利用有限元法对有外部热源的直埋电缆区域进行剖分，计算了给定电缆负荷的温度场。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
In this paper, relation between electron beam welding parameters and temperature field of beryllium is studied quantitatively with finite element method.
采用有限元方法，定量分析了电子束焊接工艺参数与铍环内表面温度的关系。
In order to solve the early age temperature field of concrete with the finite element method accurately, we discuss the finite element method about solving the temperature field in the third chapter.
之后讨论了混凝土的热物理参数的确定。为了能够正确合理的应用有限元方法求解早期混凝土温度场问题，第三章论述了求解温度场的有限元方法。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
在此基础上采用有限单元方法数值求解模型，并运用热焓法处理凝固潜热，得到了一定工艺条件下的稳态凝固温度场。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
The temperature field of the bar in and out the deformation zone during continuous rolling is simulate by finite element method.
采用有限元法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。
The three dimensional non linear finite element analysis of the transient temperature field during intermediate frequency quenching of diesel crankshaft was simulated by using of ANSYS.
利用ANSYS有限元分析软件，采用三维非线性有限元方法对柴油机曲轴中频淬火瞬态温度场进行了模拟计算；
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
Finite element method is applied to solve the field with the temperature field characteristic, then the ampacity of buried cables is received after iterative computation.
根据土壤直埋电缆的温度场特性，利用有限元法对热场进行剖分和计算，经过迭代计算出有土壤直埋电缆的载流量。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
By use of finite element analysis software ANSYS, the steady-state temperature field and thermal stress field in the tubesheet of a large fixed tubesheet heat exchanger were analyzed.
采用有限元分析软件ANSYS，对某大型固定管板式换热器管板的稳态温度场和热应力场进行了三维有限元分析。
The geometry models and numerical calculation models of temperature field in single-heat and multi-heat sources furnaces are established through finite element method.
采用有限元法建立了单热源合成炉和多热源合成炉温度场的有限元几何模型和数值计算模型。
In this paper, the distributions of the temperature and flow field are derived for a cable transformer coil by solving the finite element equations.
对一个电缆变压器的绕组，通过求解有限元方程，得到其温度场和热气流场的分布。
In this thesis the heat transfer theory and the finite element method are used to simulate the two dimension temperature field and the three dimension temperature field.
本文应用传热学基本原理和有限元基本方法，完成了二维、三维导热温度场的有限元数值模拟。
Using the finite element method, a mathematical model of temperature field for weld-repaired zone of white cast iron is constructed, and temperature field and heat cycle are analyzed.
应用有限元方法建立了白口铸铁焊接接头焊补温度场的数学模型，对白口铸铁焊补温度场和热循环进行了分析。
The prediction model of temperature field in the process of wearing water-cooled of angle steel was set up using ANSYS finite element analysis software.
针对角钢穿水冷却过程，借助ANSYS有限元分析软件，建立角钢穿水冷却过程温度场的预报模型；
The fundamental equations in finite element method for unsteady temperature field elastic plane problem are derived on the bases of variational principle of coupled thermoelastic problems.
在耦合热弹性问题变分原理的基础上，导出非定常温度场热弹性平面问题的有限元法基本方程。
Based on theories of viscoelasticity and heat transfer, the stress field of reflective crack under the temperature field is studied by finite element simulation.
考虑了沥青混合料的热粘弹特性，结合热传导理论，通过有限元数值模拟，研究在温度场作用下反射裂纹的应力场。
It is a new application to combine the finite element method analysis technique and the experiment unit of spontaneous combustion together to study and simulate the temperature field.
将有限元分析技术与煤自然发火实验台相结合，对温度场进行模拟研究，目前还属于较新的应用。
A software for simulating and calculating the temperature field in rolling tire has been developed by using the analytical function of nonlinear finite element based on the thermal stability analysis.
在轮胎热学稳态分析的基础上，利用有限元非线性分析功能，开发滚动轮胎温度场有限元模拟计算软件。
应用推荐