The paper researches the effect of irrigation technology parameters on irrigating water quota.
研究了灌水技术要素对膜孔灌灌水定额的影响。
Main technology parameters for manufacturing homogeneous particleboard are confirmed through test.
通过试验确定了麦秸均质刨花板的主要工艺参数。
It provided evidence for selecting the optimum methods and technology parameters of oil extracting.
为选择最佳的油脂提取方法与工艺参数提供了一定依据。
Through changing parameter to test, the effect of technology parameters on gasket performance was studied.
并通过改变参数进行试验，找出参数对其性能影响的规律性。
Based on the results, the technology parameters of the needle quenching in the mesh-belt furnace were adjusted.
依据模拟结果，提出了网带炉织针淬火加热工艺参数的方案。
The influences of technology parameters on silicon wafer surface quality when slicing are studied theoretically.
对锯切硅片时各工艺参数对切片表面质量的影响规律进行了理论研究。
The structure characteristics and technology parameters of the driving bridge shell in the light truck are introduced.
介绍了轻型汽车驱动桥桥壳结构特点、工艺性能。
Main technology parameters of effects on brazing stainless steel joints using nickel base filler metal have been studied.
本文研究了影响镍基钎料钎焊不锈钢接头性能的主要工艺参数。
CMS can mix up with other sizes. It is better to take the sizing technology parameters of the low concentration and high viscosity.
CMS属常温溶解型，它所形成的浆液热稳定性及与其它浆料的共混性好，它宜采用低浓高粘的上浆工艺。
Technology circulation design and chosen of technology parameters in each process were introduced, and the key measure was discussed.
介绍了工艺流程设计和各工序工艺参数，探讨了生产中的关键技术措施。
Optimization of the related technology parameters has offered the principle to increase the service life of the die and the product quality.
通过进一步优化相关工艺参数，其结果为提高冲模寿命和冲压件质量提供了依据。
Optimizing test of technology parameters was done in DK903 carding machine by using NCT, and the Numbers of carding trashes were controlled.
在DK903型梳棉机上利用NCT进行了工艺参数优化试验，有效控制了梳棉结杂数量。
The scheme shows that control system is reliable through practical running in the process of production and technology parameters reach design targets.
该方案通过实际调试与生产运行，证明控制系统运行可靠，工艺参数的控制指标达到了设计方案要求。
Ceramic is a kind of product with the biggish tolerance and complex surface, which has various product designing and manufacturing technology parameters.
陶瓷是一种宽公差、复杂曲面的产品，产品设计与制造的技术参数繁多。
Main technology parameters between round and s (Z) type winding package steel wire are compared, production process and technology requirement are given.
对圆型和s (z)型绕包镀锌钢丝主要技术参数进行对比，并给出生产工艺和技术要求。
The technology and prescription of taro ice cream have been studied in this paper through experiment and the major technology parameters testified as well.
通过实验对甘薯（芋头）冰淇淋的加工工艺和配方进行了研究，验证了主要工艺参数。
This article relates how to select fixed-quantity and twist in the technology parameters of roving, and back draft in the technology parameters of spun yarn.
阐述了粗纱工艺参数中定量、粗纱捻系数以及细纱后牵伸的选择。
Working principle, configuration demands of relative technology parameters and operation methods of siro spinning simple yarn controlling set were introduced.
介绍了赛络纺单纱控制装置的工作原理、使用中相关工艺参数的配置要求以及挡车操作方法。
This article introduces its structure, working theory, main technology parameters, key technology for research and produce the milling bit and its application.
介绍了该套铣钻头的结构特点、工作原理、主要技术参数、关键技术及应用情况。
The proper process and technology parameters of high carbon content cold bonded pellets were studied. The metallurgical properties of the pellets were determined.
研究了高碳冷压球团的工艺流程和适宜的工艺参数，并改善了冷压球团的冶金性能。
This paper proposes a new experiment method for designing technology parameters. Its main goodness is that it will improve the steadiness of the products character.
本文提出了一种进行工艺参数设计的新的试验方法，它的主要优点是，提高了产品性能的稳定性。
Basing on the deformation of ultra-light series bearing rings, heat treatment technology parameters method was adopted, so that over deformation ratio was decreased.
针对超轻系列轴承套圈易变形的问题，采取改变热处理工艺参数的方法，使变形超差率大大降低。
To introduce process, equipment and technology parameters of sealed pipe type hot galvanizing for steel wire and to analyze in detail property of coat and process devices.
介绍密闭管道式钢丝热镀锌工艺、设备及技术参数，详细分析镀层的性能和工艺装置。
A new LT process was established after the preferred Selection of technology parameters, various examinations of properties of the diffusion layer and production practices.
通过诸工艺参数的优选，扩散层性能的多方面考核和生产实践，确定了LT新工艺。
The research of technology parameters definition, optimization and prediction which focused on worker experience and traditional arithmetic model building in past literature.
以往文献对工艺参数的确定和优化研究都是集中在以工人的经验和传统数学模型的建立。
This paper briefly introduced the phosphating treatment technology Zn - Fe alloy plating, and discuss the influence of technology parameters on quality of phosphatic coating.
简要介绍电镀锌铁合金后的直接磷化处理工艺；讨论工艺参数对磷化膜质量的影响。
In this paper are provided technology parameters and introduced the structure of grinding machine and practical application examples of creep grinding technology in the factory.
本文从工厂的实际情况出发，提供了缓进磨削的工艺参数，介绍了缓进磨削工艺的应用实例及磨床的结构特点。
Through plasticization and molding experiments, the technology rule of plasticization and molding of twin-screw machine is found and the main technology parameters are determined.
通过塑化成型试验，找出双螺杆机塑化成型的工艺规律，用正交试验确定工艺参数。
Through plasticization and molding experiments, the technology rule of plasticization and molding of twin-screw machine is found and the main technology parameters are determined.
通过塑化成型试验，找出双螺杆机塑化成型的工艺规律，用正交试验确定工艺参数。
应用推荐