So, check to see whether there's an entry for the target host (see Listing 11).
因此，要检查是否有针对目标主机的条目(见清单11)。
Use traceroute (see Listing 9) to trace the full route to and from the target host.
使用traceroute(见清单9)跟踪到目标主机和来自目标主机的完整路由。
Anything else means that there could be a problem with the target host or the network.
如果不是0%，就意味着目标主机或网络有问题。
The user name and password must match to a Windows user account on the target host system.
用户名和密码必须与目标主机系统上的Windows用户帐户匹配。
This paper brings forward to a quantitative fusion model aimed at target host security.
该文提出了一种针对主机安全性的量化融合模型。
The target host is running and has an active network adapter configured with the IP address that you used.
目标主机正在运行，而且在您使用的IP地址上配置了活跃的网络适配器。
For the purposes of this article, the target host system used in all sample commands and output is called testhost.
对于本文，所有样例命令和输出中使用的目标主机系统都称为testhost。
Long response times are likely to mean poor performance for any applications that exchange data with the target host.
响应时间长很可能意味着与目标主机交换数据的应用程序的性能会比较差。
In the case of a local host, the ARP is used to locate the MAC of the target host and the datagram that is transmitted.
本地主机，利用地址解析协议定位目标主机端及要传送数据包。
When a given architecture performs a request, the data type representation may differ from the target host that satisfies the request.
当给定架构执行请求时，数据类型表示可能不同于满足需求的目标主机上的数据类型。
Knowing which ports are open on a host is an important first step for an attacker to deduce possible vulnerabilities to the target host.
知道主机上哪些端口是打开的，对于攻击者推断目标主机上可能存在的弱点是重要的第一步。
To accomplish this, the attacker sends a TCP packet with the SYN flag set to the target host, just like when opening a regular TCP connection.
要实现这一点，攻击者向目标主机发送设置了SYN标志的tcp包，就象打开常规tCP连接时一样。
If the route is correct, then you can use traceroute to determine the exact route that packets will take across the network to the target host.
如果路由是正确的，可以使用traceroute查明数据包通过网络发送到目标主机的准确路由。
You can use the command to establish whether traffic is leaving your host destined for the target host and whether traffic is making its way back.
可以使用这个命令检查应该发送到目标主机的通信流是否离开了您的主机，以及是否有返回的通信流。
A HostingLink type indicates that a unit will be hosted based on the fulfillment of all hosting requirements with hosting capabilities on the target host unit.
hostinglink类型表明一个单元将根据这个目标托管单元上所有带有托管性能需求的实现情况来进行寄主。
Within the new WebSphere MQ Client endpoint, it is possible to define dynamic outbound endpoint SSL configurations based upon the target host and port information.
在新的WebSphereMQclient端点中，可以根据目标主机和端口信息定义动态出站端点ssl配置。
Ensure that there's a route out to the target host by using route get (see Listing 7), verifying with the network administrator that this is the correct gateway to use.
使用routeget查明路由(见清单7)，检查网络管理员是否使用了正确的网关，从而确认有到目标主机的路由。
By analyzing the networking character values actively and passively, attacker can get a lot of information about target host, such as the type of operating system.
基于主动、被动探测攻击目标并分析其数据报的网络特征值，可以得出攻击目标的操作系统类型等重要信息，进而得出与之相关的系统漏洞，为入侵和攻击提供重要依据。
For example, a status of SYN_SENT indicates that a three-way handshake has been initiated by your host, but as yet no acknowledgement has been received from the target host.
例如syn_sent状态表示您的主机已经发起了三阶段握手，但是还没有从目标主机收到确认。
The idea is to find out which ports are open on a specific target host, but it is done in such a tricky way that the attacked host or a poor-quality intrusion detection tool may not notice.
这种攻击的想法是找出特定目标主机上打开的端口，但完成的方式非常狡猾，因此被攻击的主机或质量低劣的入侵检测工具不会发现。
The ARP spoofing is one of the spoofing on the network, which allows an attacker to redirect the IP packets on a network segment of Ethernet so that he can get the trust of the target host.
ARP协议欺骗是网络欺骗行为之一，它使得攻击者可以重定向一个以太网段上的IP数据报以取得目标主机的信任。
In both parasitoids, there was no significant difference in number of wasps per host egg, female ratio of progeny and percentages of wasps with parasitization between target host and C. sinica.
在子代性比、每寄主出蜂数和寄生雌蜂百分率几项指标上，两种赤眼蜂在各自靶标和中华通草蛉之间均差异不显著。
In this case, runtime analysis results are evaluated in the target memory endlessly, until you decide to dump them back to the host machine.
在这种情况下，运行时分析结果都在目标内存中得到评价，直到您决定将其返回至主机为止。
The host programs or loaders can then use this connection to transfer the bootloader onto the target, where it is written to flash.
然后，主机程序或装入程序可以使用这个连接将引导装载程序传送到目标上，并将它写入闪存。
Of course, when the client subscribed to the notification system it must have specified its SOAP messaging host as the target EPR of its messages, but the notification system is unaware of its use.
当然，如果客户机订阅了通知系统，则它必须指定其SOAP消息传递主机作为其消息的目标E PR，但通知系统并不知道这种情况。
If no inbound traffic appears, it may be that the host isn't responding or there's no valid route from your host to the target or vice versa.
如果没有出现入站通信流，可能是主机没有响应，或者在您的主机和目标主机之间没有有效的路由。
Given that my host CPU is roughly 8 times the speed of the target CPU, that's a pretty good solution; the payoff in development time saved is unbelievable.
假设我的主机CPU速度大约是目标CPU速度的8倍，那么这是相当好的解决方案；节省开发时间能带来令人难以置信的好处。
For the socket-attaching connector, the target VM will be the host.
对于连接套接字的连接器，目标VM将作为主机。
Most noticeably, it's hard to run test programs and the like in the target environment, and if it differs from the host environment, this makes configuration a dodgy experience.
最著名的是难以在目标环境中运行测试程序以及类似程序，而且如果它与主机环境不同，配置起来相当麻烦。
External address space applications are required to first use one of the optimized local adapter server APIs (Host service or Receive Request) and identify themselves as target services.
外部地址空间应用程序需要首先使用一个优化的本地适配器服务器API(主机服务或接收请求)并标识它们自身作为目标服务。
应用推荐