In this paper, an e-plane sectoral horn with amplitude taper and phase correction in the aperture is presented.
本文介绍一种在喇叭口径上具有幅度锥削的相位校正的E面扇形喇叭。
The paper researched on the rule of impact response for double taper-column shell structure with stiffening ribs subjected to underwater explosion.
研究了加肋锥柱双层壳结构在水下爆炸作用下冲击响应的规律。
This paper describes a new method and device for measuring helical line, pitch diameter, taper and half-angle of thread of petroleum thread gauges.
本文介绍一种测量石油螺纹量规的螺旋线、中径、锥度和牙形半角的新方法及装置。
This paper introduces three method of machining technique, technique analysis and measuring for internal spline with reversed taper teeth.
本文介绍三种倒锥齿内花键的加工工艺，工艺分析和测量方法。
This paper introduces the measuring principle, calculating formula and measuring method of the taps for taper pipe threads through the universal tool microscope.
本文介绍了锥管螺纹丝锥在万工显示上的测量原理、计算公式及测量方法。
According to our practical production experience, this paper discussed that during C. C. production, square and round billet mould with the same diameter should have different taper.
本文根据生产实践经验，讨论了在连铸生产中，要注意直径与厚度相等情况下的圆、方坯结晶器应有不同的锥度。
The paper introduces an method of machining longer taper, successfully breaks through the confine , that length of machining taper is restricted in length of the carriage.
介绍了一种加工长锥度的方法，成功突破了锥面加工长度受小拖板长度限制的要求。
The paper presents a method combined test with theory for free vibration of wheel with outer taper shell.
对外缘带锥壳的轮盘固有振动问题提出了一种试验与理论计算相结合的方法。
This paper introduces the design of taper bore flame hardening machine, fixtures, nozzles block and the methods to determine hardening temperature and phase balancing time.
介绍了内锥孔火焰淬火机床、工装和喷头的设计以及淬火加热温度和相平衡时间的确定方法。
This paper introduces three kinds of CNC turning method combined with practical example, concentric circle turning, center shifting turning and taper profile composition turning.
文章结合编程实例介绍了球弧数控车削三种常用的工艺方法，即车圆法、移圆法、车锥法。
The ray propagation and paraxial image characteristics of a taper-like GRIN fiber is studied in this paper.
本文研究了一种类锥形梯度折射率纤维的光线传播特性和近轴成象规律。
This paper presents a method for machining of taper cutting tools with equal helix Angle. The principle of the method is using taper helical curve with equal pitch to approach equal Angle one.
文章提出了一种在经济型数控机床上实现等螺旋角圆锥螺旋线的加工方法，其原理是用等导程螺旋线去逼近此种曲线。
In this paper, we introduce a CNC machining technique of lettering on taper-surface throught adopting the three-axis CNC and multiple axis indexing mechanism and so on.
使用三轴数控机床和万能分度头等设备，在锥曲面上刻字的数控加工方法，解决了在实际加工中类似零件对多轴数控机床的依赖问题。
Through the discussion of the key processing parameters in the fused biconical taper process, firstly the paper pointed out that this process was highly nonlinear and multi variable coupled.
分析了熔融拉锥过程的关键工艺参数，指出该过程是一个高度非线性、多变量耦合作用的复杂过程。
Taper section and custom section beams are widely adopted in the process of model set-up, which is a feature of this paper.
在建立有限元模型中，广泛采用变截面梁和异型梁是本模型的一大特色。
This paper taper further study to the algorithm of transportation question for restricted flow direction1.
本文对流向受限运输问题的求解作了进一步探讨。
In this paper, taper and top bottom different shape cutting programming of 4-axis WEDM software are studied and implemented.
深入研究了四轴线切割中的锥度切割编程和上下异形面的切割编程。
This paper presents a method that the stem taper curve of standing tree can be estimated with a considerable precision without the taper table.
该文探讨了不用编制削度表直接建立高精度立木干曲线的方法。
Described in this paper are the effects of the aspect ratio, the swept-back, the taper ratio and the profile of the ship rudder on its hydrodynamic performance by a test method of orthogonality.
本文用正交试验法研究了舵展弦比、前缘后掠角、梢根比和翼剖面对舵性能的影响；
In this paper a compatible segmented taper equation and a compatible volume ratio equation are developed.
本文提出了一致性分段式削度方程和一致性材积比方程。
A simplified method based on fuzzy weight function is proposed in this paper. 3d taper beam is replaced with line beam in the new method, which can avoid sawtooth phenomenon.
在原有模糊权重优化算法基础上提出一种简化方法。采用线性主射束替代三维锥形射束的方法消除了锯齿现象。
A simplified method based on fuzzy weight function is proposed in this paper. 3d taper beam is replaced with line beam in the new method, which can avoid sawtooth phenomenon.
在原有模糊权重优化算法基础上提出一种简化方法。采用线性主射束替代三维锥形射束的方法消除了锯齿现象。
应用推荐