First of all, PC based CNC system of Engraving and Milling Machine is summarized in this dissertation.
本文首先对基于PC的计算机数控雕铣系统进行了概述，研究了数控雕铣系统的软硬件组成。
The paper analyze and outline the process of pulverized coal milling system with intermediate storage bunker, and introduce system's operation.
阐述了中储式制粉系统的构成以及工艺过程，并对中储式制粉系统的运行作了介绍。
The results show that the system of high speed milling parameters optimization based on genetic algorithms is practicability.
结果表明，基于遗传算法的高速铣削参数优化系统的具有较强的实用性。
The object"the CAD system for shaped milling cutter"is a project application software which works with computer aided design and parameterized modeling.
课题开发的企口铣刀CAD系统是一个利用计算机辅助设计和参数化绘图的工程应用软件。
The development of high speed milling cutter and parametric design system provide firm base for the further research of high speed cutter product.
高速面铣刀及其参数化设计系统的研制，为进一步开展高速刀具产品化的研究奠定了坚实的基础。
This paper describes a Web-based virtual NC milling system.
描述了一个基于网络的虚拟数控铣削系统。
Milling system : cracker, muller, milling machine, conveyor, hoist , material house, fluidized bed furnace, helix mixing blade, ripe power house, static dust catcher and shaking motor.
制粉系统：由鄂破机、粉碎机、磨机、输送机、提升机、生料仓、沸腾炉、螺旋搅刀、熟粉料仓、静电除尘器及震打电机组成。
To improve the efficiency decreased by feed rate in traditional nc program, a nc program optimization system is developed for rough milling process.
针对传统数控程序中进给速度固定限制加工效率的缺点，开发了面向粗铣加工的数控程序优化系统。
A new open architecture multi-processor intelligent CNC system design for milling machine is presented.
提出了一种新颖的开放式铣床智能数控系统的体系结构。
This paper discusses the hardware configuration and the PLC software design in the electrical control system of a piston ring profile lathing and milling combined machine tool.
本文对活塞环仿形车、铣组合机床电气控制系统中硬件配置及PLC的软件设计特点进行了探讨。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
This paper presents a system which has achieved the integration of measuring, modeling and manufacturing on a milling machine.
介绍了一套自行研制的基于数控铣床的测量、造型和加工集成系统。
Based on the macro program of Hua-zhong NC system, it designs the milling NC program for outside hemisphere.
通过对华中数控系统中宏程序的发掘利用，顺利在经济数控铣床上实现了外半球的加工。
By classification of the milling knowledge, this paper researched the application of object-oriented knowledge representation in the milling parameter optimization expert system.
通过对铣削知识的整理分类，对产生式知识表示法和面向对象知识表示法在铣削参数专家系统中的应用进行了研究。
The influence of hardness and conditioning on milling properties of wheat was investigated on a batch-type experiment milling system.
在间歇式实验制粉系统上研究了硬度和水分调节对小麦研磨特性的影响。
The amount of electric consumption of concrete factory is large, most of which is used in milling system.
水泥厂的电力消耗量大，且集中在粉磨系统。
Aiming at solving the unsafety problem of milling vertebra wall in spine stenosis surgery a spine robot system based on force feed back control strategy is introduced.
摘要针对脊柱椎管狭窄症减压手术中椎管壁磨削不安全这一问题，介绍了一种基于力反馈控制策略的脊柱外科机器人系统。
It introduced the method and process of NC innovation on milling machine mechanical system through the NC innovation of X502 milling machine.
通过对普通铣床X502机械部分进行数控化改造，简述了普通铣床机械部分改造的一般方法和步骤。
A software system is also developed to predict the milling forces and a serial of milling tests is performed to validate the software system.
开发了一个针对铣削加工的切削力预测软件系统，通过铣削试验验证了该系统的正确性。
Aiming at solving the unsafety problem of milling vertebra wall in spine stenosis surgery a spine robot system based on force feedback control strategy is introduced.
摘要针对脊柱椎管狭窄症减压手术中椎管壁磨削不安全这一问题，介绍了一种基于力反馈控制策略的脊柱外科机器人系统。
An idea of transforming a common milling machine into a half automatic nc system with auto -measuring device is presented. The control principle is introduced, too.
提出了将普通磨床改装成带主动测量装置的半自动数控磨床的方案，并介绍了控制原理。
The bran speck and ash content of 42 wheat flour samples from different milling system and 20 wheat flour samples milled by different types of experiment mills were tested.
对制粉生产中不同制粉系统的42个小麦粉样品以及不同类型的实验磨磨制的20个小麦粉样品分别进行麸星及灰分含量测试。
Design defects and hydraulic system elements aging are the main causes of the gantry milling machine's fault.
设计缺陷和液压系统元件的老化是导致龙门铣床出现故障的主要原因。
The algorithm is effective and has been adopted by CNC system of newly developed high-speed milling machine.
该算法简单、有效，已在最新开发的高速铣床上得到应用。
Therefor, CNC technologies are introduced into the devices for manufacture keys, and a special CNC system for key tooth milling machine is developed.
为此，本文将数控技术运用到钥匙加工设备的制造中，开发研制了钥匙铣齿机专用数控系统。
Aimed at the rebuilding require of the electric control system of the special purpose of milling machine, the application of PLC was introduced, this control system acquires good effect.
根据某厂对专用铣床的电气控制系统所提出的改造要求，采用可编程控制器进行控制，取得了很好的效果。
The measurement system of milling transient cutting temperature is developed.
该文研制了一套铣削瞬时切削温度测量系统。
This paper describes the design concept and the implementing method of NC and electrical control system in the technical reconstruction of a 160 horizontal boring and milling machine.
本文阐述了数控与电器控制系统在160卧式镗铣床技术改造中应用的具体设计思想和实现的方法。
This paper describes the design concept and the implementing method of NC and electrical control system in the technical reconstruction of a 160 horizontal boring and milling machine.
本文阐述了数控与电器控制系统在160卧式镗铣床技术改造中应用的具体设计思想和实现的方法。
应用推荐