We also scheme out the signal conversion circuit and the new system anti-interference circuit.
并设计了信号转换电路和系统抗干扰电路。
The last part of the hardware design, also discusses how to improve the system anti-interference ability, and improve the system reliability.
硬件设计的最后部分，还论述了如何提高系统抗干扰能力，提高系统可靠性。
The application results show that the system has many advantages, such as high anti - interference, high reliability and simple structure in hardware. Lt is of higher practical value.
应用结果表明，本系统具有抗干扰性强、可靠性高和硬件结构简单等优点，具有较高的实用价值。
In the data acquisition system, the request of the sampling rate, distinguishability and anti-interference ability is higher.
目前，数据采集系统对采样率、分辨率和抗干扰能力的要求越来越高。
At the same time, for ensuring the reliability and stability of system operation, anti-interference mode is designed.
同时为保证系统运行的可靠性和稳定性，对系统进行了抗干扰设计。
Considering the hard working conditions of the equipment, the article also makes a brief introduction to the anti-interference measures adopted in this system.
考虑到设备较恶劣的工作环境，对系统采用的抗干扰措施也作了必要介绍。
The system has the advantages of strong anti-interference, mass information, high speed acquisition and friendly software interface.
该系统具有抗干扰能力强、信息量大、检测速度快、软件界面友好等优点。
In order to enhance the anti-interference ability of the system, the system power supply divides into 3 parts.
为了提高系统的抗干扰能力，此系统电源分为3部分。
E. platform based embedded CNC system, unlimited upgrade expansion function. The anti interference design of hardware and software synchronization to ensure the reliable operation of the system time.
基于平台的嵌入式数控系统，无限升级扩展功能。软硬件同步的抗干扰设计，确保系统时间可靠运行。
The system with so many anti-interference methods is proved to be stable&reliable, and have remarkable an ti-interference effects.
实践表明，采用了诸多抗干扰措施的系统运行稳定可靠，抗干扰效果尤其显著。
Mian components in the system are designed, block diagram of program drawn, method of program composition provided and particularly anti-interference measures taken into consideration.
设计了系统中的各主要部件，绘出了程序框图，指出了程序设计方法，考虑了抗干扰措施。
In this article the automatic admixture machine of two glues pouring is introduced, the means to enhance the anti-interference ability of this system are recmmended.
介绍二液自动混合灌胶机，及增强系统抗干扰能力所采取的措施。
The author makes a description of the features of system time control, speed control, anti interference control and software etc, and the methods of accomplishing these control are presented also.
文章着重阐述了系统时间控制、速度控制、抗干扰控制及软件等方面的特点与实现方法。
Lastly, we also analyse the errors source of the system based on the data measured from the system, and give some anti-interference methods used in system.
最后，以实测数据为依据，简单分析了系统的误差来源，并给出了在系统中采用的一些主要抗干扰措施。
The factors of the environmental and interference sources which affecting the stability of CNC system are analyzed, and on this basis, the anti-interference ways for the CNC system are presented.
前言：分析了影响数控系统稳定性的周围环境和干扰源的因素，在周围环境因素影响数控系统稳定性问题上，提出了提高数控系统抗干扰性能的措施；
The power interference factors of the DCS system were analyzed and an anti-interference power supply scheme was presented for the DCS system.
通过分析dcs系统的电源干扰因素，提出了DCS系统的抗干扰供电方案。
The paper analyzes interference of jam in the CAT system, and accomplishes anti-jamming hardware design based on design of electromagnetism shield, power supply, transmit lines and grounding system.
本文分析了干扰对某CAT系统的影响，从电磁屏蔽、电源系统、传输线路和接地系统等进行了硬件抗干扰设计。
Correlation properties of sine plus noise compound FM radar signal are studied and the special anti-interference performance of the radar system is presented.
本文研究正弦加噪声复合调频雷达信号的相关特性，并指出这种体制具有独特的抗干扰性能。
The CNC system adopts grounding, filtering, shielding and so on for anti-electromagnetic interference.
数控系统抗电磁干扰主要采用接地、滤波和屏蔽三种技术。
The method of anti-interference technique of system including hardware and software anti-interference technique was expounded.
对系统抗干扰设计包括硬件和软件抗干扰设计方法进行了阐述。
With fault distribution diagram, it has illustrated how to enhance anti-interference and take prevention measure and trouble shooting for better operation of ABB MASTER system.
并针对系统故障分布图，介绍了为提高ABBMASTER系统运行效率应增强系统的抗干扰性能，及采取预防和处理故障的措施。
In practice the system has a speedy response, strong capacity of anti-interference, stable operation and reliable safety.
实践证明，该系统响应时间快，抗干扰能力强，运行稳定，安全可靠。
Ability of anti-interference of corresponding system is high, and Hot Plug can be realized, which made systematic expansion easy.
整个温室的通信系统抗干扰能力强，而且可以实现各个通信模块的热拔插，非常便于系统的扩展。
The paper with the series S7-300 PLC for example, introduced the PLC system interference characteristics and the anti-interference adopts method, these measures guaranteed the normal work of system.
文章以S7- 300系列PLC为例，介绍了PLC系统的干扰特点以及所采取的抗干扰方法，并指出这些措施保证了系统的正常工作。
The whole MCXO is encapsulated by resistance weld to improve the system performance on anti-electromagnetism interference and adapting the ambient.
该MCXO采用电阻焊全密闭封装，提高了系统抗电磁干扰及环境适应能力。
Applying current loop to transfer signal can improve the ability of the system's anti -interference in mechanic microstrain measuring system.
在机械微应变多通道数据采集系统中，采用电流环方式进行远程信号传输，能够提高测量系统的抗干扰能力。
The CNC system is used for industrial production field with stronger electromagnetic environment and should have enough anti-interference capability when it is designed.
而数控系统一般在电磁环境较强的工业生产现场使用。所以数控系统在设计时应该对电磁干扰具有足够的抗干扰能力。
The CNC system is used for industrial production field with stronger electromagnetic environment and should have enough anti-interference capability when it is designed.
而数控系统一般在电磁环境较强的工业生产现场使用。所以数控系统在设计时应该对电磁干扰具有足够的抗干扰能力。
应用推荐