Used for surfacing welding on low hardness under normal temperature such as axle.
常温低硬度堆焊。适用于矿山机械的堆焊与修补。
Used for surfacing welding on middle hardness under normal temperature, such as axle.
常温低硬度堆焊。适用于矿山机械的堆焊与修补。
Used for surfacing welding high-Mn steel, including various part of heavy impact abrasion resistance.
高锰钢堆焊，适用于破碎机等受冲击磨损部位的堆焊。
Used for surfacing welding on low hardness under normal temperature and repairing of mining machinery.
常温低硬度堆焊。适用于矿山机械的堆焊与修补。
For surfacing welding the mold of forge in cast steel and forging steel, also to repair the forge mold.
用于铸钢及锻钢上堆焊锻模、也可用于锻模的修复。
For surfacing welding or repair the parts of wear out face made by carbon steels, middle carbon steels and low-alloy steels.
用于受磨损的碳钢、中碳钢、低合金钢机件边面堆焊、修复。
For surfacing welding or repair the wear out face made by low carbon steels and middle carbon steels, as axle, gear and blade of mixer.
堆焊或修复低碳钢、中碳钢及低合金钢磨损表面如车轴、齿轮和搅拌机叶片等。
The image of experiment shows that the optimized vision sensor system can achieve the aim of getting the TIG deposit surfacing welding information.
通过实验采集的图像，可见TIG熔敷堆焊视觉传感系统的优化基本能够达到TIG熔敷堆焊的信息传感目的。
It is found that surfacing welding shaping can be applied in rapid prototyping, and consequently metal components with compact texture can be obtained.
结果表明，堆焊技术是可以用于快速成型的，并可以得到组织致密的金属零件。
Through experiment from reason and practice, the influence of the preheating method on eliminating crack of pinch roller in the surfacing welding was discussed .
本文经过实验，从实践和理论上，研究了预热方法对消除夹送辊堆焊冷裂纹和热裂纹的影响。
The method of surfacing welding sealing strip was adopted to repair the deformation of the flange joint surface of the high and intermediate pressure outer casing .
修理前，围绕兼顾解决焊接性、应力和变形问题，结合实际施工条件制定了以手工钨极氩弧焊、镍基焊丝、焊前低温预热、焊后锤击焊缝为要素的冷堆焊工艺。
Because of containing more sulfur and phosphorus in the steel, and more carbon, high hardness in material of surfacing welding, the pinch roller often turns up hot crack.
夹送辊堆焊时，由于母材的硫、磷含量较高及堆焊材料含碳量高、硬度大，常常产生热裂纹。
With SMAW method, the surfaces of A3 and 45 steel were welded by using the series of CHR electrode, and the microstructure and performance of surfacing welding layer metal were analyzed.
借助手工电弧焊方法，使用CHR系列堆焊焊条对A 3、45钢进行堆焊加工，分析了其堆焊层金属的显微组织及性能。
Based on summing up others' experience, this paper research the direct method to calculate and simulate the temperature and stress field at the same time through a board surfacing welding sample.
在总结前人经验的基础上，通过平板堆焊实例利用直接法同时计算焊接温度场和应力场，模拟出了焊接过程。
The article discussed the welding parameter, surfacing position and magnetic control to affect welding process and overlay properties.
讨论了焊接参数，堆焊位置、磁场控制等对堆焊工艺及堆焊层性能的影响。
By means of this new kind of welding material and the corresponding surfacing process, some cold punching dies have been repaired and manufactured which function well during practical application.
采用研制的堆焊材料及相匹配的堆焊工艺成功地堆焊制造与堆焊修复了一批冷冲模具，经工况运行表明效果良好。
Argon arc welding of copper alloys and surfacing of steel.
铜合金氩弧焊及钢的堆焊用。
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊。
Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.
采用堆焊焊条CHR322，在A 3钢基体上以不同的焊接工艺进行手工电弧堆焊试验。
The welding rod has good wearing resistance and needn't warm before welding, which may be used to the surfacing of the roller.
该焊条耐磨性能好，焊前不预热，可用于轧辊的堆焊。
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用。
The properties of the surfacing layer was improved by the effect of magnetic field. The parameters of magnetic field and welding were altered during welding process.
在堆焊过程中，调节磁场参数和焊接工艺进行实验，测试了不同参数下的堆焊层硬度、磨损性能以及分析了其显微组织。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
In this paper, the technology of double electrode single arc welding is introduced and the double surfacing electrode is studied.
介绍了双电极焊条单弧焊工艺，研究了双电极石墨型堆焊焊条。
The vibrating mechanism of surfacing for repair welding of shaft is developed;
设计了用轴类零件修复的频率和振幅均可调的振堆焊机构。
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用。
This paper discussed the influence of the magnetic field intensity H and welding current I on the hardness and the wear resistance of the Co-based alloys surfacing lager.
系统地研究了磁场强度H和焊接电流I对钴基堆焊合金堆焊层硬度和耐磨性的影响，发现当磁场强度H和焊接参数相匹配时，焊缝组织才能获得最佳的细化效果。
The wear resistance of surfacing layer was investigated by the design of flux-cored wires and tig welding method.
通过药芯焊丝配方的设计，结合TIG焊接方法，对堆焊层的耐磨性进行了研究。
The wear resistance of surfacing layer was investigated by the design of flux-cored wires and tig welding method.
通过药芯焊丝配方的设计，结合TIG焊接方法，对堆焊层的耐磨性进行了研究。
应用推荐