The surface of polypropylene microporous membranes was activated by the graft polymerization of methyl methacrylate initiated with ultraviolet-photo.
通过紫外光引发甲基丙烯酸甲酯的接枝聚合，在聚丙烯膜表面引入了反应性基团酯基。
There are three ways using plasma technology to modify the surface properties of polymer materials, which are plasma surface treatment, plasma polymerization and plasma graft copolymerization.
运用等离子体技术改变高分子材料的表面性质的方法主要有三类：等离子体处理、等离子体聚合和等离子体接枝聚合。
The use of three-phase interfacial polymerization can be prepared by a relatively smooth surface of high-desalination, high water flux of the new composite reverse osmosis membrane.
采用三相界面聚合法能够制备出表面相对光滑的高脱盐、高水通量的新型复合型反渗透膜。
The main objective of this paper is to deposit a polymer nano-film containing functional group (carboxyl or amido) on titanium surface through low temperature plasma polymerization technology.
通过低温等离子聚合的方法，以丙烯酸为单体在钛表面沉积含有羧基的薄膜，以羧基为接入点固定纤维连接蛋白。
DP2000is a copolymer emulsion for surface sizing which produced by polymerization used to size many different types of paper, including offset paper, writing paper and coated board.
通过分子设计采用分段聚合方法制备聚合物表面施胶剂DP2000。
Screw compressor rotor tooth surface actually gaps between, and ability, can be pressed send impact liquid containing liquid gas, including dust, easy polymerization gas, etc.
螺杆压缩机的转子齿面间实际上留有间隙，因而能耐液体冲击，可压送含液气体、含粉尘、易聚合气体等。
Then, it was verified with hydrocarbon bromide that pyridyl was grafted on the surface of microsphere prepared in methanol by precipitation polymerization.
于是，利用溴代烃和吡啶基的反应证实在甲醇中进行的这个沉淀聚合产物的表面覆盖的是吡啶基。
This article reviews the progress of the synthesis of polymer brushes using surface-initiated atom transfer radical polymerization.
本文综述了表面引发原子转移自由基聚合合成聚合物刷及其最新进展。
METHODS The chitosan-methylmethacrylate copolymers were synthesized by free radical polymerization, and the copolymer formed nanoparticles consisted of hydrophobic core and hydrophilic surface.
方法用自由基聚合法合成壳聚糖-甲基丙烯酸甲酯共聚物，该聚合物在水中形成具有疏水核心、亲水表面的纳米粒。
In this paper a general review on the progress of modifying polymeric surface through UV - induced graft polymerization is presented.
本文总结了利用紫外光接技改性聚合物表面的研究进展。
The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of poly (ethylene glycol) methyl ether methacrylate (PEGMA).
紧接着，表面引发甲基丙烯酸聚乙二醇酯(PEGMA)原子转移自由基聚合制备梳型聚合物刷。
The methods to modify the surface of inorganic particles with in-situ polymerization, including graft polymerization and emulsion polymerization, were reviewed in this paper.
文中就聚合物对无机粒子表面进行包覆改性的原位聚合方法，包括接枝聚合法和乳液聚合法的研究现状进行了综述。
The results showed that a dense skin layer, which is a kind of polyamide structure, had been combined with the modified PAN substrate surface due to the interfacial polymerization.
结果表明，采用界面聚合反应在PAN改性膜上已复合一层致密的表皮层，该致密表皮层是聚酰胺结构。
This paper is related to surface modification of PE films by combining plasma pretreatment with UV-induced graft polymerization, in order to improve the antithrombogenicity of polyethylene (PE) films.
本文采用等离子体和紫外照射接枝技术对医用高分子材料聚乙烯进行表面改性，以提高其抗凝血性能。
A is a surface protective film with low adhesive, which is mainly made of special olefin polymerization processed by our independently developed multi-layer coextrusion technology.
是低粘表面保护膜，主要是特殊烯烃类聚合物采用自主开发的多层共挤技术制造而成。
The particle diameter and surface characteristics of toner particles prepared by suspension polymerization in the presence of carbon black particles were studied.
研究了含有微细炭黑粒子混和单体悬浮聚合产物的粒径及形貌特性。
In this paper, the surface graft polymerization of porous membrane in supercritical carbon dioxide (SC CO_2) was proposed to improve the hydrophilic and antifouling properties.
本文提出通过超临界CO_2流体技术对基体膜进行接枝改性，改善基体膜表面亲水性及抗污染性能。
The results of plasma grafting polymerization processing show that surface grafting AA is an effective method to overcome the timing-effect.
涤纶的等离子体改性加液相接枝丙烯酸处理结果表明，接枝是克服等离子体处理方法存在时间效应的有效手段。
The influence of carbon fiber surface grafting polymerization on the interface of polymer composite is also discussed.
探讨了接枝聚合物层对复合材料界面的影响。
The photografting polymerization of Nvinyl pyrrolidone (NVP) on the surface of LDPE film with photo grafting method was studied and LDPEgNVP was characterized by FTIR qualitatively.
采用一步法和二步法研究了聚乙烯薄膜表面的N- 乙烯基吡咯烷酮光接枝反应，并用傅立叶变换红外光谱仪定性表征了反应结果。
The photografting polymerization of Nvinyl pyrrolidone (NVP) on the surface of LDPE film with photo grafting method was studied and LDPEgNVP was characterized by FTIR qualitatively.
采用一步法和二步法研究了聚乙烯薄膜表面的N- 乙烯基吡咯烷酮光接枝反应，并用傅立叶变换红外光谱仪定性表征了反应结果。
应用推荐