Ingot defects may be broadly classified into internal flaws and surface flaws.
钢锭缺陷广义上可分为内部缺陷和表面缺陷。
The final step of the filling process is to use acrylic glazing compound to fill minor surface flaws.
最后的步骤用丙烯酸釉填充表面的裂缝。
Minor surface flaws are easily fixed with a skim of filler. Apply the filler smoothly with a plastic spreader.
表面上的小瑕疵只要刮平就可以轻易修复。再用一块塑料板把补土涂抹均匀。
The silica-hydroxyl layer on Duceragold continuously heals surface flaws, thereby strengthening the restoration.
在DUCERAGOLD瓷粉表面硅羟基层会不断的修复表面的瑕疵、微隙，因此修复体得以加强。
Ingot defects may be broadly classified into internal flaws and surface flaws. Internal flaws are caused by shrinkage.
钢锭缺陷广义上可分为内部缺陷和表面缺陷。内部缺陷是因收缩引起的。
Experimental data showed the correctness and feasibility of the method. It is a new method for error judgement of surface flaws.
大量现场数据的实验证明了该方法的正确性和可行性，它是一种新的表面缺陷误差判别方法。
The surface flaws and residual stresses which can be introduced by both conventional and non-conventional machining methods are discussed.
讨论了采用传统加工方法和特种加工方法可能产生的表面缺陷和残余应力。
With air-formed films the faradaic processes decreased progressively to a constant rate consistent with the increase in potential, indicating the healing of surface flaws.
对于空气氧化膜，电化学反应速度逐步变慢，直至达到相应于稳定钝态的恒定值，同时电位向正移动，表明膜中的微裂纹不断得到修补。
Aiming at the shortage of current inspection technology for surface flaws of large-caliber optical lens, a machine vision inspection technology based on line CCD is studied.
针对目前大口径精密光学透镜表面疵病检测方法的不足，提出了一种基于线阵CCD的机器视觉检测技术。
Detection of surface and inner surface flaws in materials by infrared thermal imaging system and its experimental results are described. The regularity of thermal images is also analysed.
介绍用红外热成象系统检测材料表面和内部缺陷的方法和实验结果，并分析热图的变化规律。
The profile, internal stress, cold - bending cracks and surface flaws of the hot strip have been analyzed, and the corresponding strategics and resolutions are also preferred, In order to improve the.
从宽带钢板形、内应力、冷弯裂纹及板带表面缺陷等几个方面进行了分析，并提出了相应的对策和解决办法。
It soaks up the tensions and flaws and currents that pull under the surface.
它吸满了暗藏于表面之下的紧张、裂痕和浪涌。
This is a huge advance over the original Surface with many of the major flaws corrected.
最初的Surface在修正了大量的缺陷之后取得了巨大的进步。
Flaws in the surface of the coated parts.
在涂装的工件的表面的瑕疵。
Detection of surface-breaking cracks has been realized by signal processing method using the reference signal from a surface without flaws. The principle and experimental results are given.
本文以无缺陷时的表面回波为参考信号，用信号处理方法，识别表面缺陷回波，从而实现对表面缺陷的检测。文中给出了该方法的原理及实验结果。
A new method of on line nondestructive testing for the flaws on graphite spheres surface with electromagnetic eddy current is stated.
描述了一种新的利用电涡流进行石墨球表面缺陷检测的在线无损检测方法。
The surface and cross-section of the pock flaws which appeared on the hot-dip galvanized coating were observed and analyzed by using SEM and energy spectroscopy.
通过扫描电子显微镜对热镀锌钢板镀层表面麻点缺陷的表面和断面形貌进行了观察，并对其进行了能谱分析。
The'magic mirror' (MM) approach has been used effectively to detect various flaws on mirror-like surface.
“魔镜”检测方法已被有效地应用于镜状表面缺陷的检测。
Fluorescent magnetic particle detection is a NDT method that often used for testing trivial flaws on the surface of ferromagnetic materials in order to control the qualities of product.
荧光磁粉探伤是一种常用的无损检测方法，用于检测钢制零件的表面及近表面的裂纹缺陷，长期以来一直被认为是表面裂纹检测最灵敏的方法之一。
Fluorescent magnetic particle testing is a NDT method that often used for testing trivial flaws on the surface of ferromagnetic materials in order to control the qualities of product.
荧光磁粉检测是一种常用的无损检测方法，用于检测钢制零件的表面及近表面的裂纹缺陷，长期以来一直被认为是表面裂纹检测最灵敏的方法之一。
Fluorescent magnetic particle detection is a NDT method that often is used for testing trivial flaws on the surface of some steel workpiece and for controlling qualities of product.
荧光磁粉探伤是一种常用的无损检测方法，是控制产品质量的重要手段，用于检测钢制零件的表面及近表面的裂纹缺陷。
Completed works, the surface, similar Dong Tang authentic, do not reveal flaws.
完成的作品，从表面上看类似董、唐真迹，不露破绽。
Bead inside bore of bearing, the large surface is divided into several small ones, the number of flaws are decreased and the bond strength of spraying layer and substrate is strengthened.
对轴承座内孔进行堆焊 ，将大表面分割 成小表面 ，减少了喷涂层收缩时形 成的裂纹 ，提高了喷涂层与基体的结合强度。
In the injection molding process of wrapped plastic in vehicle safe glass, the flaws always appear in the surface and the plastic may fall off from the glass because of the untight adhesion.
对汽车安全玻璃进行包边塑料注射成形时，玻璃作为嵌件会出现与塑料结合不紧密而脱落等情况，为此，研究了包边塑件注射成形过程中的传热情况。
The results show that the flaws on the surface of high quality cold rolling strip steel are due to the many kinds of non-metallic inclusions of the steel.
分析表明，钢中存在的多种非金属夹杂物是产生优质带钢起皮的主要原因。
The results show that the flaws on the surface of high quality cold rolling strip steel are due to the many kinds of non-metallic inclusions of the steel.
分析表明，钢中存在的多种非金属夹杂物是产生优质带钢起皮的主要原因。
应用推荐