Minor cracks holes and surface defects shall be made good with exterior grade water-mixed filler or masonry cement before application of the primer or first coat of paint.
在第一次应用或涂底漆之前，较小的裂缝、孔及表面缺陷应采用浆、水混合填料或水泥浆和砌浆进行填塞及填充。
To level and smooth the surface, we applied wood filler, as shown in the photo above.
为了平滑的表面，我们采用木材填料，如上面的照片显示。
The surface modification has been studied on an filler of solid propellants in this paper, by using silane and titanate coupling agents.
本文采用硅烷类和钛酸酯类偶联剂对固体推进剂中的硝酸铵填料进行表面改性。
Effect of surface state of filler on dynamic mechanical properties of composites was investigated with dynamic mechanical analysis.
本文采用动态力学分析研究了填料表面状态对复合材料动态力学性能的影响。
These react with the filler surface via solvolysis generating an alcohol by-product.
这些钛酸酯是通过溶剂分解与填料表面发生反应的，还产生副产物醇。
The influence of inorganic filler, functional monomer, etching treatment of teeth surface, etc on the shearing strength of one-component visible-light curing orthodontic adhesive was studied.
研究无机填料、功能单体及牙齿表面酸蚀与否等因素对单组分可见光固化齿科正畸粘接剂剪切强度的影响。
Minor surface flaws are easily fixed with a skim of filler. Apply the filler smoothly with a plastic spreader.
表面上的小瑕疵只要刮平就可以轻易修复。再用一块塑料板把补土涂抹均匀。
Experimental results show that effect of surface state of filler on dynamic mechanical properties of composites is very great.
研究结果表明，填料表面状态对复合材料的动态力学性能影响很大。
By analysing of IR spectrum absorption occurs on the surface of the powders and surface property of filler is changed.
红外光谱分析表明偶联剂在粉体表面产生了有效吸附，改变了填料的表面性质。
The reinforcing filler of silicone rubber with good properties was prepared with talcum and wollastonite as raw materials by ultrafine crushing and surface modifying.
将滑石、硅灰石等天然矿物通过超细粉碎和表面改性制成了性能较好的硅橡胶补强填充剂。
It was found that a dense polymeric interface layer would be formed on the surface of solid fillers due to the interaction between paniculate filler surface and epoxy matrix.
结果发现由于颗粒填料表面和环氧基体的相互作用，从填料表面开始形成了一层致密的聚合物界面层。
Use of filler material is especially advantageous if the specimens have a high degree of surface irregularities.
填充材料的使用是特别有利的，如果标本有不规则表面的高度。
In this paper, composite spinning of hollow fiber and grafting on the surface of hollow filler was instructed.
本文就复合中空纤维膜的纺制工艺和中空纤维膜表面接枝改性工作作了简单介绍。
Surface modified filler made from inorganic mineral using ultra fine can replace carbon black completely or partially, thus the cost of rubber production can be cut down.
经超细粉碎、改性后的无机矿物可全部或部分代替炭黑等常规橡胶填料，从而降低橡胶生产成本。
This understanding is very wrong, in theory, no filler layer is equal to no radiation surface.
这种认识是非常错误的，从理论上说，不设填充层就等于没有辐射面。
The influence of carbon fiber cloth content, different surface treating methods and filler on the properties of PPScomposite is studied.
研究碳纤维布的含量、表面处理方法及填料等对聚苯硫醚复合材料性能的影响。
In order to obtain better conductive functional filler and conductive adhesive, the surface of carbon nanotube (CNT) was wrapped by silver using chemical plating.
采用化学镀法在碳纳米管表面包覆金属银，从而获得了导电性极好的纳米银-碳复合管，并以该复合管为导电功能体制备导电胶。
Spread at least one coating on at least one surface of sandwich layer, contain the resin in the coating and the filler bead of 50% volume at least.
在芯层的至少一个表面上涂上至少一个涂层，涂层中含有树脂和至少50%体积的填料颗粒。
The influence of filler on extensibility, elasticity and adhesion strength of film, and influence of environment temperature on coated film surface dry time are studied.
研究了填料对膜延伸性、弹性、粘结强度的影响，环境温度对涂膜表干时间的影响。
The coal resource wastes are mostly inorganic material, it is very important to modify filler surface to enhance the compatibility with rubber.
煤炭资源的废弃物多为无机材料，对其表面改性以增强其与橡胶的相容性就显得极其重要。
In the paint by adding pigment or filler, evenly distributed in the coating film and the formation of a micro-rough surface.
在涂料中加入颜料或填料，均匀分布于涂料膜中并形成一种微粗糙面。
A novel nano-silica surface-modified by silane was used as a reinforcing filler for HTV(heat vulcanization) silicone rubber.
采用表面经过硅烷偶联剂原位修饰的纳米二氧化硅增强硅橡胶。
The main concern with this type design approach is with inconsistencies in filler dispersion resulting in widely varying electrical properties across the surface of the roll.
这种设计方法的核心是通过填料分散体中的导电和非导电材料，使辊体表面的导电性发生很大变化。
ScinPowderFilla is a resin based multipurpose filler suitable for cracks, joints and plugging walls and ceiling to give a smoother surface.
实坚补墙粉是一种多用途树脂补粉，适合填补裂缝、接口、墙洞及天花板，使表面更平滑。
Research progress in influencing factors of properties of nano-filler ECAs, such as content, size, shape, surface state of nano-fillers, curing temperature and curing time etc, was reviewed.
从纳米填料含量、粒径、形状与维度、表面状态、固化温度与固化时间等方面综述了纳米填料导电胶性能影响因素的国内外研究进展；
Research progress in influencing factors of properties of nano-filler ECAs, such as content, size, shape, surface state of nano-fillers, curing temperature and curing time etc, was reviewed.
从纳米填料含量、粒径、形状与维度、表面状态、固化温度与固化时间等方面综述了纳米填料导电胶性能影响因素的国内外研究进展；
应用推荐