The process flows of magnesium alloy surface alloying and electrophoretic coating were introduced.
介绍了镁合金表面合金化及电泳涂装工艺流程。
Objective To study the effect of heat treatment with sol-gel method on the surface of Ni-Cr alloy for PFM after ti coating.
目的探讨溶胶-凝胶沉积钛法中热处理过程对烤瓷用镍铬合金表面钛涂层的影响。
By optimized the processing technique of potassium titanate, the author in situ synthesized potassium titanate coating on the surface of titanium alloy.
通过优化钛酸钾晶须制备工艺参数，在钛合金表面原位合成了钛酸钟表面功能涂层。
Alloy coating is prepared by induction melting and casting with the method of direct feeding powder on the surface of a shaft.
介绍了用直接送粉方式在轴类零件表面感应熔铸合金层的工艺原理和实验装置。
As a result, manufacturing HA as a coating on the surface of titanium alloy is the best effective approach of combining the bioactivity of HA and the strength of the titanium alloy.
因此，制备在钛及其合金表面涂覆HA涂层的生物医用复合材料是综合利用二者各自优点的最有效途径。
Several coating processes and selections thereof are introduced. Surface pretreatments of steel or iron components, aluminum or its alloy components and plastic components are discussed.
介绍了几种涂装工艺和涂装工艺的选择，讨论了钢铁件、铝及铝合金工件、塑料件的表面前处理工艺。
Two terminal extensions are fixd on both ends of a ceramic tube on whose surface winds wave-shapcd alloy resistance wire and a high temperature-resistant and fireproof coating are applied.
在圆柱形的瓷管上固定了两个引出端子，陶瓷管表面上缠绕了扁带波浪形状的合金电阻丝，并在其表面涂覆一层具有阻燃，耐高温特性的涂层。
The mechanism and integrating strength of the composite coating with the surface of cobalt alloy dental implant made by a two-step-sintering method were studied in this paper.
采用两步烧结法烧成的钛合金牙种植体表面与复合涂层结合强度及结合机理。
Using the alloy powder coating with different sizes and keep-warm slice, the functional coating was cast-oozed on the surface of thin wall casting.
使用不同粒度的合金粉末涂层并辅以保温片，对薄壁件进行铸渗。
Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.
通过在机械镀锌过程中添加不同量的稀土金属盐，在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
A golden yellow coating was obtained by immersion process on LY12 aluminum alloy surface. The process of cerium conversion coating at normal temperature was developed.
利用浸渍法在LY 12铝合金表面获得了金黄色的铈转化膜，确定了常温稀土(铈)化学转化膜成膜工艺。
The process progress for magnesium alloy surface treatment technology include conversion coating, anodizing, micro-arc oxidation, electrochemical plating, ion implantation etc was summarized.
综述了镁合金表面处理技术的工艺进展，主要包括化学转化膜、阳极氧化、微弧氧化、金属涂层、离子注入等技术。
Results After coating Ti, the surface of Ni-Cr alloy looked light golden without particles, blisters and fragments.
结果镍铬合金经涂钛后，表面无起皮、鼓泡、剥落现象。
OBJECTIVE: to prepare a bioactive coating on the surface of the titanium alloy implant, and to evaluate one promising strategy to enhance osseointegration.
目的：在钛合金种植体表面制备生物活性涂层，寻找一种有效促进骨整合的方法。
The changes of surface coating, basic structures and mechanical proper-tie? in first stage turbine blade of GH220 alloy tested by engine rig for 236 hour? has been investigated.
研究了国产GH220合金涡轮叶片经236小时台架试车后的表面渗层、基体组织与合金性能的变化。
The relative thickness of alloy coating cake in mould is the key factor influencing thickness of alloyed layer on surface of casting.
铸型中合金膏块相对厚度是决定铸件表面合金层厚度的主要因素；
The invention discloses a steel strip having a coating of an aluminium-zinc-silicon alloy on at least one surface of the strip.
本发明披露了一种在带材的至少一个表面上具有铝-锌-硅合金镀层的钢带。
A protecting aluminum coating on the magnesium alloy surface was obtained by electro-arc spraying.
本文叙述了表面技术——电弧热喷涂技术在材料防腐上的应用。
The difference of phosphate coating between aluminum alloy sheet and cold rolled sheet is compared by the test of chemical converted film and its structure on the surface of aluminum alloy sheet.
通过对铝合金板材进行的化学转化膜及膜结构的研究试验，对比了铝合金板与冷轧钢板磷化的异同点。
This paper introduces the forming of ceramic oxide coating on the surface of forged aluminum alloy with the microarc oxidation power made by ourselves.
用自行研制的微弧氧化电源在锻铝表面生成了氧化物陶瓷膜。
According to the liquid separation property of Cu-base alloy, the Cu-base coating is obtained on the aluminum alloy by CO2 laser cladding for improving the surface strength of aluminum alloy.
为了提高铝合金的表面强度，根据铜合金的液相分离性质，采用CO2激光熔覆方法在铝合金表面成功制备了铜基合金涂层。
A new type of materials of composite alloy coating with ultra-fine WC for submerged overlaying welding on the surface of continuous casting machines rollers is studied in this paper.
本文研究了一种应用于连铸辊的含超细wc粉末的埋弧堆焊复合敷层材料。
This is related not only to the wearability, the surface roughness and the oxidation resistance of coating but also to the hardness, the toughness and the bending strength of carbide alloy A.
这既与涂层的耐磨性、表面粗糙度和抗氧化性能有关，也与硬质合金A的硬度、韧性和抗弯强度有关。
To study the effect of surface treatment such as titanium nitrogen(TiN) coating and gold-plating on corrosion resistant of Ni-Cr alloy and Ni-Cr Alloy With Titanium.
提出银件镀金、镀铑工艺流程和配方，介绍了金合金镀金工艺、镀前处理、操作要点，强调中间镀层能有效防止银基体的腐蚀和镀件变色。
To study the effect of surface treatment such as titanium nitrogen(TiN) coating and gold-plating on corrosion resistant of Ni-Cr alloy and Ni-Cr Alloy With Titanium.
提出银件镀金、镀铑工艺流程和配方，介绍了金合金镀金工艺、镀前处理、操作要点，强调中间镀层能有效防止银基体的腐蚀和镀件变色。
应用推荐