A study is performed on the method for design of a miter gate CAD system and some correlative functions of the system.
对船闸人字门CAD系统的设计方法进行了研究，探讨了相关的设计问题。
The reliability design method attempts to quantitatively study their uncertainty and estimate its influence on the safety of a structure.
可靠度设计方法企图定量地研究这种不确定性，并估计它对建筑物安全性的影响。
But the method of its design analysis is not perfect yet, and the study on its reliability, deformation and displacement is also very poor.
但目前土钉支护结构的设计分析方法仍不够完善，对其可靠性、变形位移计算的研究也很不足。
On the study of present design method of channel induction furnaces, the paper introduces an efficient, reliable and accurate programme for designing channel induction furnaces.
在对目前有心感应电炉设计方法分析研究的基础上，介绍了一个用于有心感应炉的高效、可靠、准确的设计程序。
Methods Orthogonal test design, a high effective research method of multifactors, was used to balance test study on the epidemiologic factors of the disease.
方法应用一种快速高效的多因素研究方法—正交试验设计，对该病的感染流行因素进行平衡试验研究。
Therefore, it is important to study on energy saving design method of light-gauge steel-framed composite walls in order to use it in cold areas.
因此，深入研究轻钢龙骨复合墙体的节能设计方法，对于在严寒地区推广应用这种结构体系具有重要意义。
To satisfy the need of engineering design, it is necessary to study on the loading characteristic and calculation method about wide bearing continuous beam.
为满足工程设计的需要，有必要对宽支座的受力特性及计算方法进行研究。
Currently, the study on the anchor lattice beam's design and calculating method is very scarce.
目前，对锚杆格构梁的设计计算方法研究较少。
On the basis of thorough study on the cracks and reinforcing practices in many years, the design method based on reinforcing concept is put forward.
在对裂缝深入研究和多年加固实践的基础上，提出了加固概念设计的方法。
In this study, a knowledge-based adaptive modeling method is created for clutch design. Accordingly, an intelligent design can be realized based on the adaptive model.
因此提出了一种基于知识的自适应产品模型创建方法，并在此基础上创建离合器自适应产品模型，利用该模型实现离合器智能设计。
Optimal design method of bicycle lanes is given on the base of the study of domestic and foreign bicycle traffic channel methods.
在研究国内外自行车交通渠化设计方法的基础上，给出了自行车道渠化设计优化方法。
A study is given in this paper on packaging visual design teaching method, such as figure design, colour design, characters design, trademark DE sign, formation design and so on.
就包装视觉设计教学中的图形设计、色彩设计、文字设计、商标设计以及构成设计等方面进行了研究。
The core method of internal cleaning was taken by improving the diesel design, combined with exhaust's aftertreatment, to study on the diesel particulate control.
本文对控制柴油机微粒的排放进行了深入的研究，采用了以改进柴油机设计为核心的机内净化措施，并与排气后处理措施相结合。
The understanding and research on its inner space pattern is the new attempt and new way to study the attire design method.
对服装内部空间形态的认识与研究是服装设计方法研究的一种新尝试、新方式。
Based on analyses and study of the working principle of strain gauge balances, the method was introduced in this paper for structural and electric design of the calibration system.
本文通过对应变天平测量原理的分析研究，提出了风洞应变天平结构和电气的设计方法，详细介绍了自动天平校准设备的系统构成、主要性能和技术指标。
Objective To design the teaching method of case-study team on problem-based learning, and verify and evaluate its teaching practice in clinical nuclear medicine.
目的设计以问题为中心的病案小组讨论教学法，在临床核医学核素治疗见习的教学实践中进行验证和评价。
Based on the application study of ANSYS in the optimization design of RC structure t beam, the building method of 3d parametric entity model to RC structure t beam is given.
通过对ANSYS在钢筋混凝土T形梁优化设计中的应用研究，给出了建立钢筋混凝土结构T形梁参数化三维实体模型的方法。
A study on the method of design is presented for helicopter hover with nonminimumphase unstable characteristics.
研究直升机悬停状态时其动力学模型非最小相位且不稳定特性的设计问题。
Based on the method of all-coefficient adaptive control, the paper gives the design of the tracking and pointing control system of antenna on satellite and the study of its digital simulation.
根据全系数自适应控制的原理，进行了卫星天线跟踪指向控制系统的设计和数学仿真研究。
On the basis of fully study of existing facts, the form selection, arrangement of the system and the design method of each component for the mooring system of deep sea data buoy were posed.
本文在全面分析已有资料的基础上，提出深海大型资料浮标锚旋系统的形式选择、系统布置和各部件设计方法。
Based on design case study, the article analyzed the design method of the fire roller shutter and its control modes in high-rise buildings.
通过工程设计实例，分析了高层民用建筑中防火卷帘及其电控方式的设计方法。
The design about a MIMO servo mechanism by using numerical EDA method will base on the result of this study.
据此研究之结果将作为日后以数值法引用EDA理论应用于多输入多输出控制系统之设计。
In order to carry out the engineering design and realization, and combine the system and bridge structure an integer, the study on the involved technology and method must be fulfilled.
为了开展系统工程设计及实现工作、将系统与大桥结构结为一个有机的整体，这就要求对工程设计及实现中涉及的技术、工艺、方法等问题进行研究。
Equivalent magnetic circuit model and 3d finite element method developed in this paper are helpful to the more study on optimizing design and full-load characteristic of IPM-HESM.
所建立空载磁路模型及三维有限元分析方法为该新型电机的优化设计、性能分析以及负载特性进一步研究奠定了基础。
This paper conducts a study of issues on the load cell location design and relevant auxiliary measures to be adopted in the design for pile self-balanced load test method.
对自平衡试桩法的荷载箱位置设计问题及相关的辅助措施进行探讨。
Fuzzy reliability study mostly focuses on its analytic method, and lays particular stress on fuzzy reliability analysis and design of component.
模糊可靠性课题大多数研究集中在模糊可靠性的解析方法上，而且偏重于元件级的模糊可靠性分析与设计。
Finally, carries on the comparison with the investigation and study case to the related question and the design method, regarding the solution which proposed gives the evidence and the consummation.
最后，用调研案例对相关问题和设计方法进行比较，对于提出的解决方法给予佐证和完善。
After that the method of real-time cooperative design based on features has been put forward, and a study has been carried out emphatically on the data structure of 3d modeling features...
然后提出了基于特征的实时协同设计方法，并重点对作为网络间协同信息的三维造型特征的数据结构和基于它的协同设计方式进行了研究。
After that the method of real-time cooperative design based on features has been put forward, and a study has been carried out emphatically on the data structure of 3d modeling features...
然后提出了基于特征的实时协同设计方法，并重点对作为网络间协同信息的三维造型特征的数据结构和基于它的协同设计方式进行了研究。
应用推荐