An analysis is thus given to the effects of independent variation and simultaneous variation of structural parameters on the seismic dynamic response of frame shear structure.
分析结构参数单独变异，以及同时变异对框剪结构地震响应的影响。
Methods Based on the analysis of tissue structure and skin pathology, the tissue optical parameters of vitiligo skin were determined.
方法基于白癜风皮肤的组织结构与病理学分析，确定白癜风皮肤的组织光学参数。
A capacitance sensor used for monitoring oil on - line is designed, and its structure parameters are made finite element analysis and orthogonal optimum.
设计了一种用于油品在线监测的电容传感器，并对其结构参数进行了有限元分析和正交优化。
The analytical sensitivity analysis of TEM and CCT to network structure and parameters is also realized for the first time.
同时，还首次实现了暂态能量裕度和临界切除时间对网络结构和参数的解析灵敏度分析。
In structure design, data relay, parameters selection of TAT and the correct analysis of output information, so guarantee the security of the project structure design.
在结构设计时，TAT的数据接力、参数合理选取和输出信息的正确分析、判断，是保证工程结构设计安全的关键。
After that, this dissertation expatiates on the principles of structure design and the method of choosing parameters of axial bearing and discusses the analysis of strength and thermal verification.
对轴向轴承的结构设计原理及其参数的选定进行了具体的阐述，其中对强度分析和热校核也一一进行了讨论。
The washing machine design, washing technological process, the machine structure and principle were introduced. The analysis and computation to the machine parameters and power were made.
本文介绍了环带式搅龙葡萄干清洗机的设计依据、清洗工艺、结构和工作原理，并对环带式搅龙的参数和功率进行了分析计算。
Based on the analysis of cutting chatter, the cutter body structure and parameters of special cutter for machining gear pump bodies are optimum designed.
在分析加工颤振机理的基础上，对加工齿轮泵壳体齿圈槽专用刀具的刀体结构和刀具参数进行了优化设计。
As a converse problem of the dynamic analysis of structures, the design of structure parameters to meet the requirements of the prescribed dynamic characteristics is studied in the paper.
作为结构动力学分析的一个反问题，本文研究为使系统的动力特性满足设计要求如何进行结构参数设计的问题。
Oil-gas data of Daqing is used to build network model. The parameters of network structure are optimized, and the cluster analysis of input sample is made.
采用大庆的油气层数据建立网络模型，对网络结构的参数进行了优化并对输入样本进行了聚类分析。
In this paper, die structure and design parameters, techno - economic analysis of liquid extrusion for the aluminium alloy oil pump body were introduced.
本文介绍了铝合金油泵壳体液态挤压的模具结构及设计参数、技术经济分析。
Briefly described are the structure, main technical parameters and strength analysis calculation of the low-side flat car.
简要介绍了低边平车的结构、主要技术参数和强度分析计算情况。
This paper carries out the analysis of dynamic characteristics for hydraulic circuit of the brake, and puts forward the criterion of structure design and main parameters in hydraulic system.
本文对制动器液压油路进行了动态特性分析，并提出液压系统主要参数和结构设计的准则。
The structure of preform is described, the processing parameters are predicted in theory and the designs of functional and structural composites are provided by the method of topological analysis.
本文用拓扑分析方法，对预制件结构做了说明，并对工艺参量进行了理论预测，为设计功能复合材料和特殊结构复合材料提供了新的手段。
Taking rigid disk surface as an example, fractal parameters are obtained by means of power spectrum and structure function, providing a proper geometric model for further contact analysis.
实验结果表明，分形维数能很好地表征表面轮廓，可为进一步的接触分析提供更合理的几何模型。
By using finite element analysis program, the models for computation of stiffness parameters of a specific structure with a fixed joint surface are developed.
对一个包含固定结合面的具体结构，利用有限元分析程序计算了结合面刚度参数和结合面位置对结构模态的影响。
Relative parameters are determined according to analysis and control on temperature and structure change course should be strengthened in order to improve product property and quality.
通过分析，确定了相关参数，提出应加强对温度及组织变化过程的控制，以提高产品的性能、质量。
A structure of miniature permanent magnet linear DC motor was presented in this paper. Structural parameters were optimized and prototype were manufactured to make some experiments for analysis.
介绍了一种微小型永磁直流直线电动机的结构，优化了结构参数，加工出样机并进行了试验分析。
The analysis of the main causes for the ore dilution in Chengchao Iron Mine has shown that the stope structure parameters are an important factor influencing the dilution index.
分析了程潮铁矿贫化产生的主要原因，指出采场结构参数是影响贫化率指标的一个重要因素。
Through the experiments and SEM analysis, the effect of processing parameters on porous structure was studied.
论文通过正交实验分析和电镜照片分析，讨论了实验工艺参数对样品孔结构的影响。
Based on the real-time monitoring, structure analysis and current code, the limit values of those construction parameters are discussed.
根据实际工程的实时监测结果和结构受力分析，结合现行国家规范，分别给出了上述参数的控制参考限值。
On the basis of factors analysis of structure, material emissivity, temperature distribution and surrounding temperature, the sensor's optimum parameters are obtained.
在分析传感器几何特性、材料发射率、温度分布和环境温度对有效发射率影响的基础上，给出了传感器结构的优化参数。
A new approach of full-mode flutter analysis with double parameters is proposed, which is realized in ANSYS, based on the full-order discretized physical model of structure.
基于结构的有限元全物理模型，提出了一种双参数全模态颤振分析方法，并在ANSYS中实现。
Analysis and exploration are made about structure of distributors, holes layout on sieve trays, major structure parameters and technological parameters to ensure distributors run well.
通过对分布器的结构、分布盘筛板上的布孔方式、主要结构参数和工艺参数等方面进行分析探讨，确保了分布器的良好性能。
Optimal design of F-P MCIRDA has been achieved and structure parameters of movable micro-mirror has been determined by theoretical analysis.
通过理论分析，完成了F - P MCIRDA的优化设计，确定了可动微镜的结构参数。
The structure parameters of the bogie steering mechanism are optimized according to the curving behavior and hunting stability analysis.
通过研究该转向架的曲线通过性能和蛇行稳定性，来优化迫导向机构的结构参数。
Some key techniques, such as the structure of immune entity, the detecting process, and the analysis of important parameters, were discussed.
详细讨论了免疫体的构造、检测过程并对重要参数进行了分析。
Carrying on sensitivity analysis as well as provide sensitivity curve in order to adjust structure 'parameters.
同时进行灵敏度分析，给出典型设计方案的灵敏度曲线，为结构参数的进一步调整提供依据。
Based cm the analysis of multi - layer woven fabric structure, six basic parameters are given to describe the feature of binding structure of the fabrics.
基于多层机织物结构分析，提出了描述其接结组织结构特征的六个基本参数。
The analysis and calculation on some structure parameters of the sensor have been done, such as the dimension of pressure sensitive film, the space length between anode and cathode and so on.
对传感器的压力敏感膜尺寸、阴阳极间距等结构参数进行了分析计算；
应用推荐