Finally, 3-terminal BNRT with different structure and process parameters is simulated, and the influence of device structure and process parameters upon negative characteristics is summarized.
最后，对不同结构和工艺参数的三端bnrt进行了模拟，总结出器件结构和工艺参数对负阻特性的影响。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
For peak load unit, its process model and structure parameters have obviously fast time-varying characteristic while load changing.
对于调峰机组，当负荷变化时机组的过程模型甚至结构参数都具有明显的快时变特性。
This method utilizes some of non-dimensional parameters and combined parameters, in order to interrelate the bearing load with parameters of working process and structure of a diesel engine.
本方法是利用了一些无因次参数及综合参数，使轴承负荷同柴油机工作过程及结构的某些参数联系起来。
The controlling principle of process technology parameters is expounded. The influence of the structure and technology parameters on the quality of spiral wound gaskets is investigated.
简述了缠绕式垫片生产过程中工艺参数的控制原理，结构和工艺参数对产品质量的影响。
The process of design includes the structure design of the vibrating device and the calculation of kinetics parameters and electromagnetism parameters of the vibrating device.
最后进行了与摇摆机相结合的激振装置的设计，包括激振装置的结构设计、激振装置的动力学参数和电磁参数的设计与计算。
Controller design can be regarded as a process of structure and parameters being searched.
控制器设计可看作一个结构和参数搜索与优化的过程。
Presents the structure principle of Qilu PP extruder, and describes the relationship between extruding granulation performance and relative process control parameters.
介绍了齐鲁聚丙烯挤压机的结构原理，并详细阐述了挤压造粒性能与相关工艺控制参数的关系。
They provide necessary technical support for the optimization of process parameters and the implement of structure controlling after forging.
为大型框锻件的工艺参数优化，锻后组织控制以及缺陷预测与消除等提供了必要的技术支持。
Described are the development process, structure, main technical parameters and testing on the bogies for the container flat cars in Singapore.
介绍了新加坡集装箱平车用转向架的研制过程、结构、主要技术参数及试验。
The structure of industry array nail machine, the working process and some related parameters is presented.
并简要给出了工业排钉机的结构、工作过程和有关参数。
The design process, the fundamental structure, the function parameters and the basic design principle of movable fatigue testing machine are presented in this paper.
本文论述了可移动式野外疲劳试验机的设计过程、基本结构、性能参数及基本设计原则。
The process layout, technical properties and main equipment structure and it is parameters of the researched hollow glass aluminum framework production line are introduced.
介绍了开发研制的中空玻璃铝骨架生产线的工艺布置、技术性能以及主要单机结构和参数。
The inhomogeneous glossiness of stone polishing surface result from these factors such as mineral compositions, petrological structure and polishing process or process parameters has been analysed.
从岩石的矿物组成、结构和抛光工艺及参数等方面对石材抛光面光泽度不均匀问题进行了剖析。
The paper introduced WJD-0.4 miniature electric scraper about its design and manufacturing process, especially narrated properties parameters, structure characteristic and improvement to design.
介绍了WJD-0.4微型电动铲运机的设计与制造工艺，主要介绍了该铲运机的性能参数、结构特点及设计改进措施。
The forming technology and parameters for hot forging of the brass brake shield, and the structure and the working process of the die were introduced.
介绍了黄铜闸板热锻成型工艺和参数，还介绍了模具结构及工作过程，提出了在热锻过程中应注意的几个问。
Described are the development process, main usage, technical parameters, main structure and testing of the D28 depressed center flat car.
介绍了D 28型凹底平车的研制过程、主要用途、技术参数、主要结构及试验情况等。
Described are the development process, main technical parameters, technical features, structure, testing and application prospects of the KM_ (70) coal bopper car.
介绍了km_(70)型煤炭漏斗车的研制过程、主要技术参数、技术特点、结构、试验情况及应用前景。
The change parameters and structure of controlled objects was got form data process module, and then took correspondent measures according to the examination and diagnosis information.
依据测量模块的检测与诊断信息，数据处理模块得知被控对象的结构与参数变化并实施相应控制措施。
The bending process design, bending process parameters' calculation and selection, and bending die structure design for the forming of fixed board were all introduced in this paper.
介绍了弯曲件的弯曲成形工艺方案、工艺参数的计算与选取以及弯曲模具结构与设计，得出采用多道弯曲成形工序是合理的。
The article introduces process and structure of the tilting furnace, enumerates the main performance parameters and points out its advantage and deficiency.
本文介绍了倾动炉精炼杂铜的工艺过程及倾动炉的炉体结构，列举了倾动炉的主要性能参数，并指出其优点及不足。
This paper introduces the structure and working principle of the crank rocker transposition mechanism of depth wheel on two way alternative plow and the process of optimizing its parameters.
介绍了全翻转式双向犁的曲柄摇块式限深轮换位机构的结构、工作原理及参数优化设计过程。
The quality of the FBW joint is mainly decided by temperature field distribution, process parameters during upsetting and the structure defects.
影响闪光焊接头性能的最主要因素包括焊缝区域的温度场分布、闪光顶锻的工艺参数和焊缝区域出现的缺陷组织。
The process of cold rolling forming for outer ring of single freewheel of bicycle and the structure of roller and jig, and the parameters for rolling machine have been introduced.
介绍了自行车单级飞轮飞壳冷滚轧成形工艺过程以及轧辊的结构、夹具形式和轧机参数。
The effect of process parameters on the chemical composition and structure of titanium oxide films were studied.
研究了工艺参数对氧化钛薄膜的结构及成分的影响。
Some key techniques, such as the structure of immune entity, the detecting process, and the analysis of important parameters, were discussed.
详细讨论了免疫体的构造、检测过程并对重要参数进行了分析。
The article researches the effect of different hot die forging process parameters on forgings structure and properties of GH4169 alloy.
本文研究了不同热模锻工艺参数对GH4169合金锻件组织性能的影响。
This paper analyzes the process of parallel PID discretization. An improved PID algorithm is adopted to realize a PID regulation mode with variable structure and parameters.
分析了并联pid的离散化过程，采用改进的PID算法实现了变参数、变结构的PID调节模式。
This paper analyzes the process of parallel PID discretization. An improved PID algorithm is adopted to realize a PID regulation mode with variable structure and parameters.
分析了并联pid的离散化过程，采用改进的PID算法实现了变参数、变结构的PID调节模式。
应用推荐