The results of its application in the wastewater stripper show that it can remarkably reduce the ammonia concentration in the stripper effluent, obtaining good social and economic benefits.
应用结果表明，该技术可使本装置净化水中的氨氮含量明显降低，具有良好的社会和经济效益。
In the punching die of printed-circuit boards, a hydraulic stripper is used.
本文介绍了在印刷线路板的冲孔模中，采用的液压卸料装置。
The stripped efficiency of the devolatilization stripper with steam distillation reached 70%.
开发的蒸汽汽提脱气釜，脱气效率高达70%。
Make sure the stripper is clearance enough so it will not hit the runner when parts get stripped.
保证推板有足够的避空位置，产品推出来以后，推板不会碰到流道。
Because of its own features of stripper Wells, separator cannot reflect the actual production status.
由于低产井自身的特点，分离器量油方式不能如实反映其产能。
Re-fracturing is one of effective approaches to enhance the production of the stripper fractured Wells.
重复压裂技术是提高低产压裂井产量的有效途径之一。
High precision die USES special stripper instrument in order to avoid damage when punch bears side-force.
高精度冷冲模冲裁时，为避免凸模受侧向力的影响产生损伤，而采用特殊的卸料装置。
This apparatus is mainly used in oil extracting operation of margin well, stripper well and abandon well of oil field.
该设备主要用于对油田边缘井、低产井及废井的采油作业。
In the article, process operating parameters, process control schemes and structures of the stripper are fully discussed.
本文讨论了汽提塔的工艺操作条件、工艺控制方案及设备结构。
Several mechanisms such as forced stripper, sequenced opening, delayed goring of the sliding core are applied in the design.
模具结构中采用了定模强制脱模，顺序开模，滑动型芯延时顶出等机构。
A new rough cyclone separation system was designed by attaching a stripper to the cone bottom of the conventional rough cyclone separator.
在目前常用的提升管出口粗旋风分离器的锥体下都增加一个汽提器，形成了新型汽提式粗旋风分离系统。
Some skills on suspension PVC production process were introduced, including polymerization unit, monomer recovery unit, stripper and drying unit.
介绍了悬浮法聚氯乙烯生产过程中聚合单元、单体回收单元和汽提干燥单元中的一些操作技巧。
Apply the cladding power stripper at the output end for stripping the remained pump power and guarantee the stability and reliability of the system.
在光纤输出端采用包层功率剥离器，去除剩余的泵浦光，保证了系统的稳定性和可靠性。
Using the stripper plate pushes out the die-frame in the die, after opening the die, the push-bar pushes out the stripper plate along the parting line;
该模具用卸料板推出机构的模架，开模后，推杆将卸料板沿分型面推开；
A new design method of the half-dry atmospheric crude tower is presented in this article, in which stripper reboiler is used instead of stripping steam.
提出了炼油厂常减压装置半干式常压塔的设计方法，用侧线汽提塔再沸器代替汽提水蒸汽。
The curve tends to smoothly decline with the highest production rate at first and the lowest production rate later when the Wells become stripper Wells.
曲线从初期的最高产量至后期井枯竭时的最低产量平滑下降。
The operating features of the furfural drying column and the aqueous solution stripper were discussed by utilizing the calculation result from the model.
利用模型计算的结果讨论了糠醛干燥塔和水溶液汽提塔的操作特性。
A dynamic model of mechanism has been developed for the reactor and stripper of a fluid catalytic cracking unit (FCCU) with a high efficiency regenerator.
建立了前置烧焦罐式高效再生器催化裂化装置的提升管反应器和汽提段的动态数学模型。
This article introduces the design of louver tooling for turret punch press, mainly focusing on the design and calculation of die, punch body and stripper plate.
介绍了多工位数控冲床用百页窗模具的设计，重点介绍了下装凸模、上装镶拼凹模及卸料板的设计和计算方法。
The operation, overturn and physical cleaning of the stripper-key equipment in the first ammonia stripper urea construction in China were introduced in this article.
介绍了国内第一套氨汽提尿素装置关键设备汽提塔的运行、倒头及垢层物理清洗情况。
A new stripper for removing the solder from the surface of waste printed circuit boards was developed on the basis of a nitric acid - sulfonic acid type tin stripper.
以硝酸-磺酸型退锡剂为基础配方，研制了一种脱除废旧电路板表面残留焊锡的剥离液。
This article analyzes the influence of liquid ammonia entraining oil on the stripping efficiency of carbon dioxide stripper, and gives corresponding process solutions.
针对液氨带油对二氧化碳汽提效率的影响进行分析，提出相应的工艺处理方案。
The results showed that the main ways of improving quality were optimizing the operation parameters of stripper and reconstructing the purified system of vapor-ammonia.
指出提高液氨质量的主要途径为优化汽提操作及改造气氨精制系统。
Briefly presents the operation and overhaul of ammonia stripper of urea plant over the years, especially sums up the turnover of the stripper during its overhaul in 2004.
简要介绍尿素装置汽提塔历年来运行及检修情况，特别针对2004年汽提塔调头检修的情况作了总结。
Through analyzing moulding technology of the toolbox, designed a injection mold with straight gate injection system, ejector rod and stripper plate united ejection mechanism.
通过对工具箱的塑件工艺分析，确定了直浇口浇注系统、推杆、顶板联合顶出的模具结构。
The cause is analyzed for the leakage at the upper cover of the ammonia stripper in a urea unit, and relevant measures have been taken, with assurance of safety in production.
分析了尿素装置氨气提塔上封头泄漏的原因，采取了相应的措施，使安全生产得到了保障。
By the joint action of cavitation corrosion produced in the high speed stream and medium activation corrosion, the spray nozzles of anhydrous ammonia stripper corrode seriously.
无水氨汽提塔喷嘴在高速蒸汽产生的空蚀和介质的活化腐蚀联合作用下腐蚀严重，通过材质、结构优化取得了良好的效果。
The under-capacity of the compressor was overcome by the installation of a pre-stripper, which also reduced the consumption of electric power of the compressor to a great extent.
增设预汽提塔解决了压缩机能力不足的问题，并为压缩机的大幅度节电创造了条件。
The internally thread component may be stripped from the core using the basic stripper plate design providing the plastic material has sufficient elasticity during the ejection phase.
内螺纹组件可能采用推板设计被从型芯上推出，如果塑性材料在推出阶段有足够的弹性。
The internally thread component may be stripped from the core using the basic stripper plate design providing the plastic material has sufficient elasticity during the ejection phase.
内螺纹组件可能采用推板设计被从型芯上推出，如果塑性材料在推出阶段有足够的弹性。
应用推荐