Hazelett strip casting process is already successfully used for producing slug for impact extrusion.
哈兹·列特铝板带连铸连轧工艺已被成功地用于铝和铝合金冲击挤压用坯料的生产。
Silicon steel is one of the most potential steel grades that can be produced with twin roll strip casting process.
硅钢是双辊薄带连铸工艺最具开发潜力的钢种之一。
A brief introduction to the preparation of metallographic specimen of NdFeB ingot or strip casting are given in this article.
文章介绍了钕铁硼铸块或速凝薄带的金相样品的制备方法。
The result shows that the technology of semi-solid strip casting and rolling can improve plastic processing property and refine grain.
结果表明，半固态连续铸轧技术可以提高板带的塑性加工性能，细化晶粒。
Temperature field of cast roll and its thermal deformation were studied during strip casting with elastoplastic and thermal stress coupled FEM.
建立了双辊式薄带钢铸轧过程的三维流场与温度场耦合数学模型，研究了工艺参数对铸轧过程的影响。
The near net shape thin strip casting process, a competitive new technology, can simplify procedure, save energy, reduce energy consumption and cost.
近终形薄带连铸是钢铁工业简化工序、节能降耗、降低成本最具有竞争能力的一项重大新工艺技术。
The paper studies the twin-roll strip casting process by a water model. By using the level detector, the level fluctuation has been measured in the pool.
本文利用水模型研究了双辊薄带连铸过程，使用浪高仪对双辊间熔池内的液面波动进行了测量。
Twin roll strip casting of steel is a new process which produce the strip products directly from melt metal by using the two counter rotating rolls as the mould.
双辊薄带钢连铸也称薄带连续铸轧，是以液态金属为原料，以两个转动方向相反的铸辊为结晶器．用液态金属直接生产薄带钢的新技术。
The solidification model of twin-roller strip casting is established. The solidification process of strip casting is mathematically simulated by using the finite element software.
建立双辊薄带连铸凝固数学模型，并利用有限元软件对薄带连铸凝固过程进行数值模拟。
Firstly, the microstructure and the electrochemical properties of hydrogen storage alloys prepared, respectively, by gas atomization, melt quenching and strip casting were presented.
首先分别简述了气体雾化法、熔体快淬法和铸带法制备储氢合金的微观组织结构特征和电化学性能。
Using the ANSYS finite element analysis software, thermal analysis and thermal stress analysis of side dam in the strip casting process are carried out to explain the cause of side dam cracking.
采用ANSYS有限元分析软件，分析了侧封板在铸轧过程中温度场和热应力场，由此解释侧封板产生裂纹的原因。
The paper analyzes the construction, performance and working principle of SC pneumatic booster pump, and introduces its application in the hydraulic system of aluminum strip casting-rolling mill.
本文深入分析SC气动增压泵的结构、性能和工作机理，详细介绍其在铝带铸轧机液压控制系统中的应用。
A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.
利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。
ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.
连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。
Manufacturing sheet, strip material, rods, tubes, casting parts, etc.
制造板料、条材、棒材、管材，铸造零件等。
The structure of dual phase and orientation of AISI304 casting thin strip produced by twin roll caster were analyzed by orientation mapping based on EBSD technique.
利用EBSD取向成像技术，分析了双辊连铸法生产的AI SI 304 奥氏体连铸薄带的两相组织结构及取向特点。
The quality control and measures of producing pure copper strip for copper-clad aluminium conductor was represented, when the strips were in casting, rolling and surface treating.
阐述了生产开发铜包铝线用纯铜带在熔铸、轧制、表面处理过程中的质量控制及其措施。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
Thin slab casting and rolling technology has been developing toward two directions: ultra-thin strip production and multiple steel grades production.
前言：薄板坯连铸连轧工艺有两个发展趋向：超薄带钢生产线和多品种生产线。
Key technique of casting aluminium strip with electrolytic aluminium liquid is summarized. The choice of technological parameters of smelting and casting and quality control is introduced.
概述了直接利用电解铝液生产铝带卷的关键技术，并对熔炼、铸轧工艺参数的选择，质量的控制进行了全面的分析。
The technology of thin strip direct casting under development has been introduced in respect to the current trend of worldwide experimental study an.
带钢直接浇铸技术，目前尚处于试验阶段，文中介绍了世界各国的试验研究现状及各国大多采用的双辊式薄带钢连铸机的技术特点。
The new progress in magnesium strip roll casting is dwelled on, other magnesium plate and strip producing technologies are summarized in this part.
这里详述了镁合金板带的双辊铸轧技术进展情况，概述了镁合金板带的其他生产工艺。
The recent progress on the research of the mathematical model of casting process and solidification microstructure for twin-roll strip cast is discussed.
综述了近年来双辊薄带连铸过程与凝固组织数学多场耦合模型的研究进展。
Studied the annealing institution of 3003-o aluminum alloy strip for drawing is researched, while the chemical composition and casting, hot rolling, the cold rolling, process were determined.
研究了深冲用3003-o铝合金带材合理的生产工艺，在化学成分和铸造、热轧、冷轧工艺确定的情况下，试验研究成品退火工艺制度。
There are about 50 near net shape continuous casting facilities which have been commissioned or under building in the world, including about 6 facilities for stainless steel strip.
目前全世界已建成投产和尚在建设中的薄板坯连铸生产线达50多套，其中生产不锈钢带的约有6套。
We described systematically the contents, meaning, conditions, and progress in advanced countries about integrated management of steelmaking, continuous casting and hot strip rolling.
结合我国具体情况，对炼钢-连铸-热轧一体化管理的内容、意义、条件以及国外情况进行了系统的阐述。
Therefore high performance aluminum alloy strip can be only made by reasonable designed ultrasound casting equipment.
因此只有设计合理的超声铸造、铸轧装备，才能制备出高性能的铝合金带材。
And finally, we are looking forward to the future of development wide application of two - roll strip continuous casting technique in our country.
并且对双辊薄带连铸技术在我国的开发和推广应用前景进行了展望。
Therefore, the mathematic expression of deformation resistance of 304 stainless steel strip continuous casting was obtained according to the model built.
因此，根据建立的计算模型得到了薄带连铸304不锈钢的变形抗力数学表达式。
Therefore, the mathematic expression of deformation resistance of 304 stainless steel strip continuous casting was obtained according to the model built.
因此，根据建立的计算模型得到了薄带连铸304不锈钢的变形抗力数学表达式。
应用推荐