The Discover phase in IBM's Enterprise Transformation solution helps to reduce the time, effort, and stress associated with these challenges.
IBM企业转化解决方案中的发现阶段能够帮助您减少时间、工作和这些难题所带来的压力。
According to the tempering temperature and hardness curve, the redistribution of residual stress is associated with the transformation of residual austenite.
由回火温度与硬度变化曲线证实，残余应力重新分布是与残余奥氏体转变相关联。
It also could evidently improve the immunologic hypofunction (WBC phagocytosis and lymphocyte transformation etc.) induced by the cold stress in mice.
能改善寒冷应激所致红细胞免疫、白细胞吞噬以及淋巴细胞转化等功能低下。
Again USES the model, through transformation composite beam highly and various steel plates parameter comparative analysis beam and support capacity, stress, deflection change and so on.
再利用此模型，通过变换组合梁的高度和各钢板的厚度等参数比较分析梁的承载能力，应力，挠度的变化等。
By coordinate transformation of stress we have the differential relationship between the principal stresses and stress components to facilitate deviation calculation.
利用应力的坐标变换关系，推导出主应力与应力分量之间的微分关系，使主应力的精度计算更加简便。
The traditional dilatancy equation of Cam-clay model was modified and the relativity between the phase transformation stress ratio and initial effective pressure was considered.
模型对传统修正剑桥模型中的剪胀性公式进行了改进，考虑了状态转换应力比与初始有效围压的相关性。
Based on the anisotropy induced by the critical stress line, the idea of transformation of stress space is presented.
从岩土类材料极限应力状态线所致的各向异性出发，提出了应力空间变换的思想。
The reverse transformation of martensite to austenite takes place when the alloys are annealed after the external stress is unloaded.
卸去外加应力，对其进行回复退火，合金发生逆转变，即从马氏体转变为奥氏体。
The transformation of basal body with laser melted clad coating was studied according to the transmission of elastic stress wave which on a laser coating under repeated impact load.
根据多冲载荷下激光涂层应力波的传播过程研究了涂层全覆盖基体试样在受冲击载荷下的变形情况。
The change of transformation stress and the modulus of elasticity during cyclic deformation was analyzed from the continuum mechanical point of view.
从唯象观点分析了循环变形期间相变应力和弹性模量的变化。
Structural stress can also provide energy for the transformation from organic matter to oil and gas.
构造应力还可为有机质向烃类转化提供能量。
The transformation between the two models depends on the stress triaxiality in the region where failure takes place.
决定这两种断裂模式的转变的是应力三轴度。
For quenching processes are typical temperature - phase transformation - stress coupled processes, it is quite difficult to precisely predict the processes.
淬火过程是典型的温度-组织转变-应力耦合的过程，准确模拟淬火过程十分困难。
These accommodation transformation systems have mainly been caused by the tectonic stress fields that lead to the alternating occurrence of compressional subsidence and nappe uplifting.
这些可容空间转换系统主要是由于构造应力场的挤压沉降作用和推覆隆升作用在平面上的交互出现所致。
By matrix transformation, the solutions of surrounding rocks disturbance stress, strain and displacement are obtained.
通过矩阵变换，得到隧道围岩体扰动应力、应变和位移的解答函数式。
The research results show martensite transformation stress decreases with an increase in cycle due to the residual strain during full cyclic loading.
研究表明在完全循环加载过程中，由于残余应变的存在，马氏体相变应力随循环增加而减小。
The stress on the surrounding rocks affects severely the stability of tunnel. To estimate the stability of tunnel needs the transformation tendency of the stress on the surrounding rocks.
围岩应力是影响隧道稳定性的根本因素，掌握隧道围岩应力的变化发展趋势，是准确判断隧道稳定性的前提。
The stress takes some effects on the martensitic transformation.
应力对于马氏体相变有一定的影响。
This article proposes the applictaion of similarity transformation of matrix for stress analyses, which is available for the formula of stress analyses.
提出了矩阵相似变换在应力分析 （特别是三向应力分析 ）中的应用 ，使应力分析得以程序化。
Mechanical tests Several types of mechanical test were performed in order to investigate the effect of the stress state on the austenite transformation rate and on the resulting work hardening.
机械性能测试为了研究应力状态对于奥氏体转变速率和加工硬化结果的影响，我们进行了几种机械性能方面的试验。
In the case of the reverse transformation, the higher the strain rate, the larger the decrease in temperature, resulting in decrease in the transformation stress.
对于逆向转变，高应变率，较大的降低温度，从而减少了转型的压力。
Utilizing the transformation of bead metal can reduce tensile stress directly in the course of welding, even produces compressive stress, to improve the service life of welding structure effectively.
利用焊缝金属组织转变的方法可以在焊接过程中直接降低焊接残余拉伸应力，甚至产生残余压缩应力，有效地提高焊接结构的使用寿命。
The formula of residual stress in laser transformation hardened case is inferred, and the experimental results are discussed.
推导了激光相变硬化层的残余应力公式，并对实验结果进行了分析讨论。
The width and depth of laser transformation hardening zone and residual stress distribution were measured experimentally.
实测了激光相变硬化区的宽度和深度及残余应力分布。
The R-curve and thermal shock resistance properties are improved and the transformation effect are strengthened by the surface compressive stress effect.
表面压应力作用强化了相变增韧效果，改善了材料的表面抗裂纹性能和抗热震稳定性等力学性能。
Shape memory effect of alloy is obtained by making use of martensitic phase transformation induced by stress or temperature. Shape memory alloy is a new kind of function materials.
形状记忆合金利用应力诱发马氏体相变或温度诱发马氏体相变实现形状记忆效应，是一种新兴的功能材料。
If the constrained thermal cycle stopped upon cooling while the forward martensitic transformation was in progress, the loading stress strain curves exhibited the stress plateau immediately.
如果在冷却过程中发生正相变的时候停止冷却并加载，则加载应力-应变曲线只出现应力平台。
In addition, the parameter of transformation plasticity increases with applied stress.
同时，在弹性范围内，相变塑性系数也随外加应力增加而增加。
In addition, the parameter of transformation plasticity increases with applied stress.
同时，在弹性范围内，相变塑性系数也随外加应力增加而增加。
应用推荐