• Maxwell stress method is an available one to calculate electromagnetism torque of machines.

    麦克斯韦应力张量法是计算电机电磁转矩的有效方法。

    youdao

  • Initial stress method is proposed to solve the problem of dual extension-compression elastic modulus.

    建议采用初应力法求解不同拉压双模量弹性问题。

    youdao

  • An equivalent stress method for the structural analysis of derrick with initial deformation is offered.

    为此,采用等价应力法对有初始变形的井架进行结构分析。

    youdao

  • An element initial stress method to calculate stress intensity factor of three-dimensional mixed-mode crack is introduced.

    对单元初始应力法应用于复合型三维裂纹问题进行了研究。

    youdao

  • Based on computation and analysis of seepage field, pore water pressure of inter-slice is defined in the effective stress method.

    有效应力分析方法中依据渗流场的计算分析得到条间孔隙水压力。

    youdao

  • This paper indicates that the hot stress method could be effective and safe for ship to adopt new wave load model and erosion model.

    文中指出,采用新的波浪设计载荷和腐蚀增量模型,热点应力法可以有效评估边舱折角点的疲劳强度,保证结构在寿命期内的安全。

    youdao

  • Furthermore, the unloading shear strength parameters should be applied when using total stress method to analyse excavation problems.

    此外,对于基坑开挖采用总应力法分析时,应按卸载总应力强度指标计算。

    youdao

  • Anew compensation method, 'Belated initial stress method', is developed for term of dynamic stiffening by synthesizing the existing method.

    在综合现有方法的基础上提出了新的动力刚化项补偿方法—差时初应力方法。

    youdao

  • The average stress method is feasible for simulating the prestressed load and in the prestressed design and analysis of the silo structure.

    使用平均应力法模拟预应力对筒仓的作用是可行的。

    youdao

  • Wall shear stress method integrates the plug flow displacing, the low speed displacing and the turbulent flow displacing methods in theory.

    壁面剪应力设计方法,从理论上把塞流顶替、低速顶替及紊流顶替技术统一起来。

    youdao

  • The accumulated fatigue damage was calculated in frequency domain by equivalent stress method and equivalent narrow band method respectively.

    在频域内分别用等效应力法和等效窄带法计算了累积损伤。

    youdao

  • According to the analysis, the authors conclude that the unloading shear strength parameters should be used when applying total stress method.

    经过分析,作者认为当采用总应力法计算时,原则上应采用卸载强度指标。

    youdao

  • Classical integral method and combined method for reinforced concrete constitute the theoretical basis of equivalent additional stress method.

    钢筋混凝土中经典的整体式和组合式方法构成了等效附加应力法的理论基础。

    youdao

  • The paper presents the life evaluating process of girth butt welds by hot spot stress method and the calculation methods of hot spot stress range.

    给出了采用热点应力法进行铸钢节点环形对接焊缝疲劳寿命估算的全过程。

    youdao

  • The effective stress method of dynamic analysis is used to explain the performance of Douhe Earth Dam during Tangshan Earthquake on July 28, 1976.

    采用有效应力的动力分析法计算了陡河水库土坝在1976年7月28日唐山地震中的表现。

    youdao

  • In this paper, 3-d stress fields in a prestressed reinforced concrete structure were analyzed using twice-freezing stress method of photoelasticity.

    本文提出用三维光弹性应力冻结法模拟分析预应力钢筋混凝土结构中的应力。

    youdao

  • There are two analysis methods of hydraulic fracture: effective stress method and total stress method. Their computation results are quite different.

    水力劈裂的常用计算方法分有效应力法和总应力法,但其计算结果却常有很大差异。

    youdao

  • In this paper, the assumption of equivalent stress method only used near the dam heel and toe and the middle regions stress USES the FEM calculated stress.

    针对该问题,提出局部等效应力方法,即对坝基面坝踵和坝趾局部区域进行局部等效处理,坝基面中间大部分区域仍采用有限元计算。

    youdao

  • There are mainly two methods to determine compressed layer thickness in calculating foundation settlements, control strain method and control stress method.

    地基沉降计算中压缩层厚度确定方法主要有应变控制法和应力控制法两种。

    youdao

  • The basic thought of partial stress method of simulated sample design, which was put forward in this paper, enriched the designing theory of simulated sample.

    提出的模拟件设计的局部应力法基本思想,充实了模拟件设计理论。

    youdao

  • Two dimensional dynamical finite element and effective stress method were used to analyze dynamical response of Qifenghu Lake earth-rock dam during earthquake.

    采用二维动力有限元方法并结合有效应力法对栖凤湖土石坝受地震作用的动力响应进行了分析。

    youdao

  • Apparent stress intensity factor KI with different radius are calculated by the stress method and KI is obtained by interpolation to the crack tip circular arc.

    采用应力法计算不同半径处的表观应力强度因子,插值到裂尖圆弧而得。

    youdao

  • Equivalent additional stress method can be the same with integral method or combined method depending on the equivalent method of additional nodal force calculated.

    等效附加应力法根据附加节点力计算方法的不同分别对应整体式和组合式方法。

    youdao

  • It is also shown that under the creep limit failure criterion, the creep internal stress method has the advantage of less test time in comparison with the isothermal...

    而以蠕变极限为失效准则的蠕变内应力法与常规的以蠕变试验为基础的等温外推法相比,还具有试验时间短的优点。

    youdao

  • The calculation and analysis of the core type rockfill dam of Lubuge Hydropower Station are conducted by the programs of total stress method and effective stress method.

    鲁布革水电站心墙堆石坝采用总应力法和有效应力法计算程序进行计算和分析。

    youdao

  • Thmugh the comparison with both the simplified method of structural mechanics and the finite element equivalent stress method, the feasibility of the method is verified.

    通过与结构力学简化方法和有限元等效应力法的比较,验证了该方法的可行性。

    youdao

  • This paper discusses how to use bottom shearing stress method to determine the resuspension rate and deposition rate, and how to select and calculate the correlative parameter.

    论文就如何利用床面切应力的方法确定沉积率和冲刷率以及如何计算和选取水沙计算过程中其它相关参数展开了初步的探讨。

    youdao

  • In recent years, remedy of main girder's downward deflection of OTC by pre-stress method has found wide spread application. This is also the common practice iu Wu Hun district.

    用预应力法修理桥式起重机主梁下挠,近年来得到了广泛的应用,武汉地区应用亦较为普遍。

    youdao

  • Using transformed stress method, it is easy and reasonable to combine the model with the Generalized Non-linear Strength Theory to make the model describe complex stress states.

    结合广义非线性强度理论采用变换应力三维化方法简单、合理地使模型实现三维化。

    youdao

  • To cut down great calculation of assembling and disassembling of stiffness matrix in the nonlinear procedure, the initial stress method is introduced to resolve the nonlinear equations.

    使用初应力法对非线性方程组进行迭代计算,避免了组装和分解总体刚度矩阵的繁杂而庞大的运算。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定