All system components are integrated in a high strength fiber-reinforced plastic housing.
所有系统元件集成于高强度纤维增强塑料外壳。
High intensity: the high strength fiber cement flat, 6mm thicksheet strength significantly more than 9.5mm thick ordinary gypsum board.
强度高：纤维水泥平板强度高，6mm厚板材的强度大大超过 9.5mm 厚的普通石膏板。
The dynamic tensile properties of five types of high strength fiber bundles were measured and the sensitivity of strain rates was investigated.
测试了五种纤维束的准静态和动态应力应变关系，并比较了它们对应变率的敏感性。
Plastic cement solves cracking problem of cement sheath successfully. With high strength fiber added in, not only the strength, but also the flexibility is increased.
塑性水泥可以很好地解决水泥环的脆裂问题，它通过掺入高强度纤维，不仅可增加水泥石的强度，而且可改变水泥石的弹性。
Blades: Light, stiff carbon fiber replaces fiberglass at critical points in the blades, so they lose pounds and gain strength.
风叶特点：风叶的关键部位由轻质、强度高的碳纤维替代传统的玻璃纤维，结果是重量得到减轻而强度却增加了。
Recently, they were packaged with fiber optics for detecting the light signals that register magnetic field strength.
目前，它们被封装进检测光信号的光学器件，以记录磁场的强度。
Energy Return Wheel is made out of carbon fiber and kevlar components that decrease the weight and increae the overall strength.
能源循环车轮由碳纤维-芳纶复合材料制成，从而减轻重量，增强整体强度。
The carbon fiber, aluminum and titanium frame gives the 2015 Honda CB750 enough strength to carry heavy riders.
碳纤维、铝钛车架，能够让整车承载重型驾驶人员。
This paper talked about the effects of fiber length, coarseness and strength on the properties of paper, which include tensile strength, tearing strength, burst strength and formation.
讨论了纤维的长度、粗度和纤维的内在强度对纸页的抗张强度、撕裂度和耐破度以及纸页成形性能的影响。
The experimental results show that when the matching between Aramid fiber and PPTA is 1:1.5 more or less, the tensile strength, tear and formation of aramid paper is the best.
实验结果表明，当芳纶短切纤维与芳纶浆粕的配比为1：1.5左右时，所抄造纸页的抗张强度、撕裂度、匀度最好；
The results of some experiments show that the optical fiber strength can be increased significantly by proper process.
同时进行了对比实验，实验结果表明，正确的处理方法可显著提高光纤强度。
Results showed that the flexural strength of ESMC parts was different at different direction of fiber orientation.
研究表明制品在各流动方向上的弯曲强度有很显著的差别。
Strength of bamboo raw fiber blending yarn appear low valley at critical blending ratio.
竹原纤维混纺纱在临界混纺比处强度均出现低谷。
The importance of winding tension control to increase the developed fiber strength is discussed.
讨论了缠绕张力控制对提高纤维发挥强度的重要性。
In order to make the calculated burst pressure coincide with actual value, the developed fiber strength value must be determined by the simulation test.
为了使计算的爆破压强与实际结果相符合，纤维发挥强度的选取必须由模拟试验确定。
High strength glass fiber is one of the more important reinforcing material of advanced composites.
高强度玻璃纤维是高级复合材料的重要增强材料之一。
So far, great progress has been made in cotton quality breeding in our country, but the improvement of fiber strength still lags behind.
迄今为止，我国棉花品质育种虽然取得了很大的进步，但纤维强度的提高仍较缓慢。
In this paper, the flexural-tensile strength of layered steel fiber reinforced concrete was studied, and its reinforcement mechanism was analyzed briefly.
对层布式钢纤维混凝土的弯拉强度进行了试验研究，并对其增强机理做出了简要的分析。
Different tip pruning times produce certain influence on fiber strength and Mic value , but do not change the fiber length.
不同打顶时间对棉花纤维强度和马克隆值均产生一定的影响，但未改变棉纤维长度的变化。
The spinning process became complicated and the fiber strength decreased with the addition of fragrant masterbatch.
试验说明，随着芳香母粒含量的增加，出现纺丝困难，纤维的断裂强度下降。
To improve the mechanics performance of composite, we often use high strength, high modulus fiber, eg.
为提高复合材料的力学性能，通常使用高强度、高模量的纤维材料，如玻璃纤维等。
Fiber strength depended on the dry weight per fiber length, content of cellulose, thickness of cell wall, maturity, density of cell wall and other sub-factors.
纤维强度是由单位纤维干重、纤维素含量、胞壁厚度、成熟度及胞壁结构密度等亚性状决定的。
Fiber concrete mixture design is an important part of assuring fiber concrete strength.
纤维混凝土配合比设计，是确保纤维混凝土强度的重要环节。
High strength chitin fiber can be used in medical suture, bone-setting material, body tissue rebuilding material, medical paper, wound dressing and anti-bacteria fabric fields.
高强度甲壳质类纤维可被应用于医用缝合线、正骨材料、人体组织工程材料、医用纤维纸、伤口敷料、抗菌用纺织品等领域。
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
The research work is considered to be of reference value in evaluating the strength of glass fiber products.
该研究对玻璃纤维制品的强度评价有重要的参考价值。
The lint cotton yield was positive with fiber strength and micronaire. The correlation among fiber length, strength and fineness of insect-resistance hybrid cotton were still inconsistent.
产量与纤维比强度和麦克隆值均呈正相关，抗虫杂交棉仍然存在纤维长度、强度与细度不协调的问题。
Yield had little correlation with fiber characters, especially with fiber strength.
产量与纤维品质间相关性较低，与纤维强度几乎无相关性。
Yield had little correlation with fiber characters, especially with fiber strength.
产量与纤维品质间相关性较低，与纤维强度几乎无相关性。
应用推荐