Strength Design values may be converted to Allowable Stress Design values.
设计要求、强度设计值可转换为许用应力设计值。
Practical strength design formulae for pipelines with elbows are recommended.
推荐了实用的埋地弯头强度设计计算公式。
Then recommended values in fatigue strength design of ordinary steel bar are proposed.
并且给出了相应应力比下普通钢筋的疲劳设计强度建议值。
Test results provide an important basis for strength design and structural optimization of propeller blades.
为螺旋桨桨叶的强度设计与结构优化提供了重要依据。
These conclusions provide theoretic reference for the strength design and lifetime prediction of the casing.
为石油套管的强度设计和寿命预测提供了参考理论。
Strength design of stationary rings of ladle frame concerns pouring safety, ladle service reliability and its manufacture cost.
浇包吊环强度设计事关浇注生产的安全性、浇包使用的可靠性和产品制造的经济性。
The test for local strength of welded joints is necessary for strength design and load capacity estimation of the welded joints.
工程上进行焊接接头强度设计或承载能力评定时，需要测定焊接接头各区域的局部强度。
Finally, the basic guide principles are given about equal strength design of a certain section and also the whole range of superstructure.
最终给出剖面等强度设计一般的指导性原则，及整个上层建筑范围内的结构设计原则。
The main contents include the process calculation, tower's structural design, strength design and checking the stability of tower and so on.
其塔体为绕带式，设计的主要内容包括工艺计算、塔的结构设计以及塔的强度设计和稳定性校核等。
Some preventive measures against the failures are suggested and criteria for the dynamic strength design of this type of gear are specified.
指出了这类齿轮动强度设计今后应遵循的几个基本准则。
In improvement of machine design and reasonable selection of design parameters not only strength design but tribology design as well are required.
提高机械设计的质量，合理选择设计参数，不仅需要进行强度设计，而且需要进行摩擦学设计。
From our analysis, so many accidents of pressure vessels were due to the unreasonable structural design, which is as important as strength design.
根据过去的压力容器破坏事故分析，有相当一部分是由于结构设计不合理引起的，认为设计合理可靠的结构和强度设计同样重要。
The strength design of the tower crane structure is mainly to ensure that the metal structure part meets the strength condition in the work process.
塔式起重机结构的强度设计主要是确保金属结构部分在工作过程中满足强度条件。
It has a practical meaning for the strength design and combination usage of drill string, casing and tubing under different technological conditions.
对处于不同工艺条件下的钻柱、套管、油管的强度设计和组合使用等均有实际意义。
Stress analysis method, material strength theory, safety index and design criteria are main contents in strength design and computation of structures.
应力分析方法、材料强度理论、安全指标与设计准则是结构强度设计与计算理论的主要内容。
This approach is suitable for prediction of yielding strength in HAZ-softened welded joint as well as for strength design of well-matched welded joint.
这种方法可用于热影响区软化焊接接头屈服强度的预测和高匹配接头的强度设计。
The reliability model of strength design of gun barrel is built on the basis of analysis about distributions of material property, loads and dimensions.
从分析火炮身管的材料、载荷和结构尺寸的离散性出发，建立了火炮身管强度设计的可靠度模型；
Ultimate strength design is not required and the reinforcement can be determined only on basis of allowable crack width in design of beam on foundation.
地基梁可不进行承载能力极限状态的计算，其配筋可由正常使用极限状态中的允许裂缝宽度来确定。
This paper suggests a calculation formula for eccentrically loaded brickwork or column with biaxial bending in terms of ultimate strength design method.
本文按照极限状态的设计方法，提出了砌体（柱）在双向偏心压力作用下的计算公式。
Verified formula and conclusion in the paper offers important theoretical reference for the strength design and optimization design for the hammer crusher.
文中求证的公式和结论为锤式破碎机的强度设计和优化设计提供了重要的理论依据。
In addition, the plastic ultimate strength of cross section and some proposals concerning the ultimate strength design of long span PPC continuous box girder...
此外，还对截面塑性极限强度问题进行了探讨，提出了大跨ppc变截面连续梁极限强度设计的建议。
In addition, the plastic ultimate strength of cross section and some proposals concerning the ultimate strength design of long span PPC continuous box girder wi...
此外，还对截面塑性极限强度问题进行了探讨，提出了大跨ppc变截面连续梁极限强度设计的建议。
It is proved by a concrete example of gun barrel strength design with consistent reliability that a consistent reliability will offer a consistent safety abundance.
针对某型火炮身管进行了可靠度有限一致的强度设计，从而保证了身管设计安全裕度的有限一致。
In this thesis, the FEM stress analysis and strength design criteria, multi-axes strength theory and computation, limit load analysis method of arch DAMS are concerned.
本文结合工程实际，在拱坝有限元应力分析方法与强度设计准则、多轴应力强度安全计算、拱坝极限荷载分析理论和方法等方面开展研究。
So the design of axle is very important and different from the design of general machine parts. Axle design includes two contents: strength design and construction design.
轴的设计很重要，其设计不同于一般零部件的设计，它包含两个主要内容：强度设计和结构设计。
The casing strength design charts presented by this paper can be used to check the safety of the casing in salt bed or help perform casing strength design when the load is known.
可用来检测盐岩等流变地层中下入套管的安全性或在已知套管外载时进行套管强度设计。
A new kind of strength design method of gun barrel and corresponding safety coefficient choice range were presented, and the strength failure process of gun barrels was analyzed.
提出了一种火炮身管强度设计的新方法和基于该方法的安全系数选择方案，分析了身管强度失效过程。
A new kind of strength design method of gun barrel and corresponding safety coefficient choice range were presented, and the strength failure process of gun barrels was analyzed.
提出了一种火炮身管强度设计的新方法和基于该方法的安全系数选择方案，分析了身管强度失效过程。
应用推荐