So there, among the rocky of bending hickory and walnut trees, her feet slightly wary of crawfish in the icy water, she would gather positive strength for herself, as well as for her tribe.
所以，在核桃树和胡桃树弯曲的石头小坡上，她的脚在冰水中小心翼翼的躲避着小龙虾，她将为自己以及她的部落收集的积极力量。
Superhuman mental powers, including his extraordinary sense of hearing and blazing speed-reading, are as vital to Superman as his bullet-beating velocity and steel-bending strength.
超人的精神超能力，包括他拥有的听觉超能力和阅读超能力，就像他拥有的可以躲避子弹的速度和折断钢铁的力量一样至关重要。
This paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact Ferrographical analysis is made.
本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。
Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.
考虑系统误差和轮齿综合柔度，对齿轮弯曲强度的计算力点进行研究。
The law shows that, along with the static pre-load increasing, the dynamical bending strength of concrete would go up to a peak value and then move downward to the static strength.
计算结果显示，不同细观骨料模型具有相似的规律，即随预静载增大，混凝土动弯拉强度上升，至一定峰值后回归到静载强度。
Bending strength, compressive strength, interfacial bond strength and frost-resistance were also studied and analyzed.
并对其抗压、抗折、新老界面粘结强度及抗冻性等进行了实验研究。
The rotating bending fatigue strength is the criterion of resistance to propagation of hot cracks.
旋转弯曲疲劳强度是抗裂纹扩展能力的判据。
It is found that the bending strength of gauge glass increases when the temperature decreases.
随着温度降低，玻璃板的抗弯强度测定值增加。
The study results in the paper can be conclude that the bending strength and fatigue life of RPC with steel fibre are much higher than those of plain RPC.
本文研究结果可归纳为：与无纤维RPC相比，钢纤维的加入大大增加了活性粉末混凝土的抗折强度和疲劳寿命。
Bending strength and fracture toughness of the composite were studied, and the microstructure of the composite was researched by TEM techniques.
对复合材料的强度及韧性进行了研究，采用TEM技术对材料的微观结构进行了分析。
Bending strength significantly increased after 200 and 400 hours of aging only.
弯曲强度显著增加200和400小时的老化只。
The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
Strength and bending resistance test, welding heat test and highly accelerated life test (HALT) were retested up to grade.
经瓷体强度实验、抗弯曲实验、耐焊接热实验、加速寿命实验，其各项指标均合格。
The influences of different synthetic graphite, pressure applying moment and cooling-down methods on electrical conductivity and bending strength of the composites were investigated.
研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响。
This paper delivered the relationships of uniaxial tensile and compressive stress with strain and bending properties, and felt-bending strength of cement mortar with polyvinyl acetate (PVAC).
研究掺聚醋酸乙烯水泥砂浆的轴拉和轴压应力—应变关系、抗弯性能以及长期粘结抗弯强度。
Additionally, the fracture surfaces of bending strength specimen were also explained.
此外，还对抗弯强度试样的断口进行了分析。
Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.
应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。
The results show that the dry density, bending strength and compressive strength of foam concrete block decreased with the increasing of the amount of foam.
研究结果表明：泡沫加入量增加，泡沫混凝土砌块的干密度逐步减小，抗折和抗压强度递减。
The mechanism of bending strength increased by bauxite chalmette and the process were investigated by XRD and SEM.
利用XRD、SEM等测试手段，对熟铝矾土提高瓷坯抗弯强度的机理和生产工艺进行了研究。
With site deterioration the wood crushing and bending strength is increased.
随着立地的贫瘠化，木材抗压、抗弯强度增大；
The measuring technique of tensile strength of ceramics is usually sophisticated, but it is easy for us to measure the bending strength of ceramics.
陶瓷材料抗拉强度的测试技术一直是个难以解决的问题，而抗弯强度的测定则已经较成熟且简便。
The hardness, the fracture toughness and the bending strength of the composites were tested.
对热压烧结后材料的硬度、断裂韧性和抗弯强度进行了测试和分析；
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
Conclusion: the values of fatigue strength and bending strength of the bone cement were improved by vacuum mixing. The method of vacuum mixing has an active significance in clinic.
结论：采用真空搅拌骨水泥的方法，提高了国产骨水泥的抗疲劳强度及静态抗弯曲强度，在临床应用有较大的积极意义。
As compared to general coating, gradient coating has even more excellent performances in bending strength, bonding strength, thermal shock resistance, microhardness and thermal stress relaxation.
与一般涂层相比，梯度涂层显示出更为优异的弯曲强度、结合强度、抗热冲击性、显微硬度分布及缓和热应力等性能。
The stress shielding rate, bending strength of different directions and torsion strength of the three different fixation methods were measured and compared.
然后对三种固定方法对固定骨段的应力遮挡率、不同加载方向的弯曲强度和扭转强度进行测试。
The results showed that cemented carbide manufactured by sinter-HIP is free of porosity and transverse-rupture strength, bending fatigue life are also greatly increased.
结果表明，烧结-热等静压制作的硬质合金孔洞消除了，并且硬质合金的抗弯强度和弯曲疲劳寿命也大幅度提高。
Bending strength is a critical index for inspection and evaluation of cement concrete facing.
水泥砼面层以抗折强度作为强度检验和评定的首要指标。
Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
应用推荐