After that, using finite element software of ANSYS, the HPS bending girders were molded for both strength and stability analysis.
应用有限元软件ANSYS，对高性能抗弯钢梁进行强度分析和稳定分析。
With the lager dimension of the submarine pressure hull, the strength and stability analysis of pressure hull is still an important subject in the submarine design.
随着潜艇耐压船体的几何尺寸增大，耐压壳体的强度与稳定性分析仍然是一个具有重要实际意义的研究课题。
The strength and stability analysis of Super-high arch DAMS built in conditions of complex topography and geology is an important subject in arch dam design and research.
复杂的地形地貌和地质条件下特高拱坝的强度与稳定分析是目前拱坝设计和分析中的重要研究课题。
Mechanical analysis and calculation of the truck's metal construction are made by the matrix method, and the strength, rigidity and stability of the metal construction are checked.
运用结构力学的矩阵分析法和计算机对抽芯作业车主体金属结构做了力学分析与计算，进而校核主体金属结构的强度、刚度和稳定性。
The strength, rigidity, stability and torsional rigidity of the bodywork structure were calculated by using finite element analysis. Thus the optimum fillet of the bodywork structure can be specified.
采用有限单元法对车体结构的强度、刚度、稳定性、挠跨比、扭转刚度进行计算，为车体设计提供了参考依据。
The discovery would be helpful to a thorough study on the strength theory, deformation and stability analysis in soils.
这将有助于土体在强度理论、变形和稳定分析等方面的深入研究。
In order to make the initial design more convenient, some approximate analysis formulae of strength and stability of typical nonuniform stiffened cylindrical shell are also given in the paper.
为了方便初步设计，还给出了一些典型变刚度加肋圆柱壳的强度和稳定性近似分析公式。
Finally, analysis special road with complicated geology condition and stability of slope by strength reduction FEM, testify whether this process method meet need.
最后，对含有复杂地质条件的特殊路段进行分析，用有限元强度折减法分析边坡的稳定性，并验证处理方案是否满足要求。
The shear strength of slide zone soil is an indispensable parameter for stability analysis and countermeasures of landslide.
大型滑坡滑带土强度参数的正确选取，是作好滑坡稳定性评价和抗滑工程设计的重要环节。
The result of the analysis indicated that the cylinder and the nozzle still had the enough strength, stiffness and stability even the corrosion had occurred.
计算结果表明，再沸器塔段筒体和接管经腐蚀后仍具有足够的强度、刚度和稳定性。
The application of strength reduction FEM in the stability analysis of tunnel under pile loads and design and displacement release factor of tunnel were studied in detail in this thesis.
本论文针对有限元强度折减法在隧洞近接桩基稳定性分析与设计中的应用以及隧洞位移释放系数进行了较详细的研究。
Finally the design and applications of several large PDLRSS projects were introduced, stability analysis were performed to satisfy overall reasonable strength level and buckling characteristics.
最后介绍了几个大型局部双层网壳工程设计应用，并进行了稳定特性分析，保证强度与稳定的合理性。
The shear strength parameters of rock masses are generally most important and difficult to determine when performing stability analysis of rock works.
岩体抗剪强度参数的确定是进行岩体工程稳定性分析中最基本和最重要的，也是最困难的一项工作。
Based on the different strain failure criteria and the equivalent cyclic number, the dynamic strength parameters are obtained, which can be used in dynamic stability analysis of landfill.
提出不同应变破坏标准和等效振动次数的动强度指标，为填埋场动力稳定性分析提供合理的强度参数。
The tenacity and heat stability of and phenol formaldehyde foaming materials added by nylon, were enhanced based on analysis of wear rate and compressive strength.
通过分析磨损率和抗压强度等性能，废尼龙的加入可以提高酚醛树脂和酚醛泡沫材料的韧性和热稳定性。
The strength reduction FEM is applied to the stability analysis of slope. The basic principle of this method and the definition of safety factor, yield rule and instability criterion are discussed.
将有限元强度折减法应用于边坡稳定分析中，探讨了该方法的基本原理、安全系数的定义、屈服准则和失稳判据等。
Stability method based on slip surface FE stress and shear strength reduction method are two principal methods for FEM slope stability analysis.
基于滑面上应力分析法和强度折减法是边坡稳定有限元分析方法中两类主要的方法。
For ensuring safety, laying the jointless switch must make an analysis on the strength and the stability.
为了保证安全，铺设无缝道岔应进行强度和稳定性检算。
Primary factor analysis was used in this paper to analyze the factors which affect the main index such as free CH2O content, shear strength, solids content and stability.
应用主因子分析法探讨了氧化淀粉改性脲醛树脂的合成工艺中，游离甲醛含量、固含量、贮存稳定性、剪切强度等主要技术指标的影响因素。
This paper presents the analysis of strength, stiffness and stability of the vessel by finite element method. An improved design scheme was developed.
这里采用有限元法对辅舱进行了强度、刚度和屈曲分析，并提出了改进方法，为设计人员直接采用。
The approach to apply the combined theory of strength and stability into fatigue analysis is discussed.
探讨了强度稳定综合理论用于疲劳寿命计算的方法。
Within the evaluation, there are both quantitative analysis of risks of calculation of strength and stability and qualitative analysis of risks of collision.
在评估当中既有强度和稳性计算风险的定量分析，又有对该轮碰撞后危险的定性分析。
Through one example, factor of slope stability computed by limit equilibrium methods and limit analysis methods is more conservative than that computed by FEM based on the shear strength reduction.
通过算例对极限平衡法，极限分析法和强度折减法进行比较，说明前两种方法计算结果过大。
A method for prediction of the strength gain is proposed and its application to stability analysis described.
本文还建议一种预估地基强度增长的方法及其在稳定分析中的应用。
A method for prediction of tbe strength gain is proposed and its application to stability analysis described.
本文还建议一种予计地基强度增长的方法及其在稳定分析中的应用。
A method for prediction of tbe strength gain is proposed and its application to stability analysis described.
本文还建议一种予计地基强度增长的方法及其在稳定分析中的应用。
应用推荐